BBK performance parts & accessories at HorsepowerFreaks

VIEWED MODELS

SHOP BY VEHICLE

SHOP BY BRAND

Back

BBK Parts and Accessories

BBK Cold Air Intakes

All BBK "cold-air-induction" systems utilize a high-flow washable conical cotton element filter and most are designed as fenderwell units to maximize performance. In addition to the standard hand-polished and chrome plated systems, now offered are a variety of kits utilizing a custom designed lightweight aluminum inlet casting which is hand-polishe...
BBK Cold Air Intakes - Details

BBK Power Plus Air Intakes

This system can be installed in just minutes and is good for approximately 10-15 horsepower and works excellent with other power adders such as performance exhaust and performance throttle body.
BBK Power Plus Air Intakes - Details

BBK Power Plus F-Series Air Intakes

All BBK "cold-air-induction" systems utilize a high-flow washable conical cotton element filter and most are designed as fenderwell units to maximize performance.
BBK Power Plus F-Series Air Intakes - Details

BBK Gripp Series Bushings

Whether it's the popular offset steering rack bushings to cure bump-stop on lowered Mustang applications, or the popular front bushing packages which include sway-bar, strut-mount and end-link bushing. Gripp polyurethane bushings have been the top choice of Mustang enthusiasts for over a decade. New for 2000 are our polyurethane spring isolato...
BBK Gripp Series Bushings - Details

BBK Control Arms

With such quality features as .120" wall super-strong steel construction, full robotic welded seams, baked-on powder coat finish and high-performance polyurethane bushings with greasable zirk fittings. Our line of rear control arms has been a number one choice of Mustang owners for years. These easy to install pieces deliver awesome grip for th...
BBK Control Arms - Details

BBK Fuel Pressure Gauges

Fuel pressure gauge kit. Direct fit, screws directly into the factory fuel rail (with adapter) or into a BBK fuel pressure regulator. Liquid filled to combat harmful engine vibrations. Allows super accurate fuel pressure readings for optimum engine tuning.
BBK Fuel Pressure Gauges - Details

BBK Fuel Pressure Regulators

When it comes to modifying a late-model Ford or GM Muscle car, one of the most important areas is the fuel pressure for the fuel injection system. Not enough fuel pressure will result in loss of power, over-heating, detonation, and cracked pistons. While too much fuel pressure will result in loss of power, poor gas mileage, and frequent oil changes...
BBK Fuel Pressure Regulators - Details

BBK H-Pipe Hi-Flo H Pipes

For off-road or street use, the Hi-Flo Series H-pipes for Mustangs offer enthusiasts an affordable and easy way to bolt-on 15-25 horsepower while retaining OEM quality and longevity. Built with fully mandrel bent aluminized tubing all pipes are precision welded and use the highest quality die-stamped flanges for a perfect fit every time. Availa...
BBK H-Pipe Hi-Flo H Pipes - Details

BBK H-Pipe high performance H Pipes

For maximum street and strip performance, we now offer a new CNC-Series full-length header kit with matching h-pipes for owners of 1979-2000 Mustang models. These headers feature the same quality standard items as all our premium exhaust components for guaranteed performance and quality. Available for 1979-2000 4.6 and 5.0 Liter Mustang Models ...
BBK H-Pipe high performance H Pipes - Details

BBK Full-Length Performance Headers

Owners of the popular 1996-Current 4.6 Liter Equipped Mustang GT & Cobra models can now bolt-on major horsepower and torque increases while maintaining OEM quality and reliability for everyday street use. These new BBK full-length Header systems have delivered consistent gains of 17-23 rear wheel horsepower when tested by such magazines as Supe...
BBK Full-Length Performance Headers - Details

BBK High-Performance Long Tube Headers

BBK Premium Series Performance Headers

With such quality features as standard heavy-gauge mandrel-bent tubing, precision die-stamped and laser-cut flanges, screw-in studs and our optional Polished Ceramic Finish. The popular shorty and equal-length headers for such vehicles as the popular 5.0 Mustang have become the most desired and well known performance headers on the market. This sam...
BBK Premium Series Performance Headers - Details

BBK Phenolic Spacers Intake Manifold Gaskets

By dramatically reducing inlet air temperatures in the intake manifold, these unique phenolic manifold spacer kits add more than 5 horsepower to most applications at a very reasonable price. Computer machined from 3/8" thick phenolic material and supplied with all necessary bolts and hardware - phenolic manifold spacers are a perfect bolt-on perfor...
BBK Phenolic Spacers Intake Manifold Gaskets - Details

BBK Intake Manifolds

BBK's engineering team has done it again with their all-new line of SSI-Series performance intake manifolds. These manifolds are currently offered for the popular 5.0L Ford Mustang, LS-1 Camaro/Corvette and the 1.8L Honda models - with 4.6L Mustang and GM TPI versions on the way. Starting with a clean sheet design - BBKs in-house pattern facilit...
BBK Intake Manifolds - Details

BBK Kit O2 Sensor Harnesses

BBK O2 Wire Harness Extenders - A must when Installing Full Length Headers - so that the O2 Sensors reach New O2 sensor Locations on the headers. Factory OEM connectors and heat protective sleeves make installation a snap. (Sold in Pairs) These are 4 wire and can be used for 3 or 4 wire O2
BBK Kit O2 Sensor Harnesses - Details

BBK SFI Underdrive Pulleys

BBK s line of underdrive pulley systems have always been a top performance bolt-on for the popular late-model Mustang. Now owners of the latest 2005+ Mustang GT models can bolt-on an additional 8-10 horsepower with BBK s latest offering. Designed as an OEM quality upgrade to the factory system this new kit features an SFI-approved balancer/cra...
BBK SFI Underdrive Pulleys - Details

BBK Throttle position Sensors

BBK Replacement Throttle Position Sensors for stock or BBK throttle bodies. These Sensors work on Stock Throttle bodies and ALL BBK Throttle Bodies.
BBK Throttle position Sensors - Details

BBK Pro-Plus Series Short Shifters

With much-improved shifting, shorter precise shifts and a super-strong CNC-machined design. The new Pro-Plus series Mustang shifter is unmatched by the competition. This unit features a multi-location base for adjustable mounting as well as a beefy adjustable shift stop base for effortless powershifting. This shifter works great in all T-5 and T...
BBK Pro-Plus Series Short Shifters - Details

BBK Gripp Series Springs

When it comes to the late-model Mustang aftermarket, nobody offers a wider selection of lowering springs than the popular Gripp series systems. These 1 1/2" lowering spring packages are available in both progressive and specific rate versions. All lowering springs are factory pre-set to ensure a perfect stance as well as life long performance,...
BBK Gripp Series Springs - Details

BBK Throttle Bodies

No longer will owners of the popular civic and Acura Integra be forced to pay too much money for a minimally improved, bored-out factory Throttle Body. As the world's originator and number one manufacturer of Performance Throttle Bodies, it was only a matter of time before our engineers would release these beautiful new units. Starting with a b...
BBK Throttle Bodies - Details

BBK Twin Throttle Bodies

BBK Power-Plus series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus throttle bodies are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC machining centers to ensure a perfect fit on your car or truck. Their features include double-sealed bearings, ...
BBK Twin Throttle Bodies - Details

BBK Kit Throttle Body Gaskets

These Premium Quality Gasket Sets Include All Gaskets required for Installation or Re-Installation of your BBK Performance Power Plus, or stock OEM Throttle Body.
BBK Kit Throttle Body Gaskets - Details

BBK High Performance X Pipes

The popular High Flow X-Pipe assemblies now covers all 1986-2000 4.6 and 5.0 liter Mustang applications. With computer mandrel-bent aluminized tubing, die-stamped flanges and precision welds; the quality matches the 12-20 horsepower improvement seen on the rear wheel chassis-dyno.
BBK High Performance X Pipes - Details