The Blackworks Racing throttle body adapter allows the use of the RBC intake manifold while keeping the drive-by-cable.
Features:
Adapts the RBC/RRC manifold flange to be used with K20A/A2/A3/Z1 throttle bodies.
Made in the USA
Made from High Quality 6061 Billet Aluminum
All hardware is included
BlackWorks Racing Throttle Body Adapters - Details
BlackWorks Racing Water Temp Sensor Adapters
The Blackworks Water Temperature sensor adapters are made from high quality aircraft alloy material. They are designed and engineered with the most cutting edge manufacturing technology.
Their adapters are built to withstand high temperatures and tolerance. These are campatable with a large variety of hoses.
BlackWorks Racing Water Temp Sensor Adapters - Details
These Black Works Battery Tie Downs are CAD designed and constructed of high quality 6061 CNC Machined Billet aluminum.
Features:
They are anodized to give an amazing look that will last for years.
The BWR Battery Tie Down works with your stock mounting bolts and OEM or aftermarket batteries.
Each one has a laser engraved logo.
...
BlackWorks Racing Billet Battery Tie Downs - Details
BlackWorks Racing Block Guards
Blackworks Racing Engine Block Guards are CAD designed and CNC-Machined from high quality AL6061.
The Blackworks Racing Block Guard provides maximum coolant passage to the head minimizing the risk of head gasket failure.
BlackWorks Racing Block Guards - Details
BlackWorks Racing Front Camber Kits
BlackWorks Racing (BWR) front adjustable camber kits replace the vehicle's factory upper control arms.
This allows you fine tune your front suspension's camber settings +/-. BlackWorks Racing (BWR) powder coats each arm for durability.
Features:
These kits include a sliding ball joint allowing you to adjust camber +/- 4 degrees
...
BlackWorks Racing Front Camber Kits - Details
BlackWorks Racing Rear Camber Kits
BlackWorks Racing rear adjustable camber kits are manufactured from forged AL7075. Each of their kits use vulcanized rubber bushings. BlackWorks Racing rear camber kits are laser etched, and anodized in two colors (Gunmetal and Black)
BlackWorks Racing Rear upper camber arms replace the factory steel upper arms, these are adjustable up to +/- 5...
BlackWorks Racing Rear Camber Kits - Details
BlackWorks Racing SS Series Coilovers
The New BWR SS Coilover features a wide range of height adjustments without changing the spring compression and sacrificing the shock stroke.
Traditional Coilovers require the movement of the spring perch to determine the ride height, causing a reduction in suspension travel and induce coil spring binding. The bottom shock fork / connector ...
BlackWorks Racing SS Series Coilovers - Details
BlackWorks Racing VTEC Conversion Kits
BlackWorks now offers a Full Vtec Conversion kit for people that want to use an LS/VTEC or B20/VTEC set-up.
BlackWorks is one of the easiest and most complete way to supply oil to the head without any machining required.
Kit Contents:
BlackWorks Vtec Conversion Sandwich Plate with a -6AN fitting for the plate and head.
BlackW...
BlackWorks Racing VTEC Conversion Kits - Details
BlackWorks Racing Cam Seal Covers
Are you tired of having oil dripping down the side of you motor as it leaks out of your factory cam seal? Of course you are, well don't worry BWR has the solution for you with their newly released Billet aluminum cam seal.
The Blackworks Racing Cam Seals are constructed of high quality billet 6061-T6 aluminum CNC machined to perfection. Upgr...
BlackWorks Racing Cam Seal Covers - Details
BlackWorks Racing Clear ECU Covers
Blackworks has recently released their clear plastic ecu covers. They are available in a variety of configurations depending on your ECU and engine management.
Each cover is Individually laser serialized a number to guarantee authenticity.
BlackWorks Racing Clear ECU Covers - Details
BlackWorks Racing Reservoir Tank Covers
Blackworks Racing now offers Brake and Clutch reservoir covers so you can add that last and final touch to your engine bay.
They are made from a high quality fabric with embroidered BWR logo. By using these it will help prevent spillage of vital fluids, and it will help prevent dust and debris from accumulating on the tanks. Each reservoir ...
BlackWorks Racing Reservoir Tank Covers - Details
BlackWorks Racing Washer and Bolt Dress up
Looking to enhance the look of your engine bay? These washer and bolt dress up kits from Black Works will help you stand out from a crowd, and help add that personalized touch to your engine bay.
They are available in a variety of colors to match your setup.
BlackWorks Racing Washer and Bolt Dress up - Details
BlackWorks Racing Electric Cooling Fans
BlackWorks Racing Slim Fans are designed to be much smaller than your factory fan while out performing it. These Slim Fans will give you a lot more clearance in your engine bay for more important things like a turbo kit or some bad ass race header.
If you are in a bind for room because you are doing a J32 swap in a Civic, LS1 in a 240SX or a...
BlackWorks Racing Electric Cooling Fans - Details
BlackWorks Racing Exhaust Flanges
Blackworks Racing now offers a full line of DIY performance parts to help all your fabrication needs. Their flanges are CAD designed and Manufactured in the USA.
Unlike the cheap laser and flame cut ones in the market, theirs are precision CNC Machined for superior quality. These exhaust flanges are made from high quality Stainless Steel....
BlackWorks Racing Exhaust Flanges - Details
BlackWorks Racing Turbo Exhaust Manifolds
Blackworks Racing Honda/Acura B-Series Turbo Manifolds are designed and manufactured in the USA! Each manifold is made from High Quality Stainless Steel. Their Manifolds are Tig-Welded and back purged to ensure the highest quality product. Their flanges are machined flat ensuring a perfect seal.
Blackworks Flanges are produced in their fac...
BlackWorks Racing Turbo Exhaust Manifolds - Details
BlackWorks Racing Fuel Pressure Gauges
The Blackworks Racing Liquid-filled Fuel Pressure gauge accurately measures the engine's fuel pressure. This Liquid-filled Fuel Pressure Guage is Vital to help monitor consistent fuel at all times.
These gauges are good from 0 PSI to 100 PSI.
BlackWorks Racing Fuel Pressure Gauges - Details
BlackWorks Racing Adjustable Fuel Pressure Regulators
The Blackworks Racing Fuel Pressure Regulators are designed to work with the factory or an aftermarket fuel rail. Their Fuel Pressure Regulators can handle Adjustments from 20-80psi of Fuel Pressure. They were designed by the latest state of the art CAD software in the industry to ensure the highest quality. These are machined from high quality 606...
BlackWorks Racing Adjustable Fuel Pressure Regulators - Details
BlackWorks Racing Hydraulic Hand Brakes
BlackWorks Racing (BWR) hydraulic E-Brakes are made from the highest quality materials ensuring the longest product life possible. These are a necessity for any drift or rally vehicle. These are universal fit hydraulic kits.
BlackWorks Racing Hydraulic Hand Brakes - Details
BlackWorks Racing Big Tube Headers
The BlackWorks Racing (BWR) Big Tube headers are designed and engineered for maximum flow, and horsepower. These header's are made and constructed from T304 stainless with a custom CNC machined head flange. This is a 4-2-1 Tri-y set up with a 2.5 inch collector. BlackWorks Racing header's have great oil pan clearance, so there is no needed modify o...
BlackWorks Racing Big Tube Headers - Details
BlackWorks Racing Race Headers
The BlackWorks Racing (BWR) Race headers are designed and engineered for maximum flow, and horsepower. These header's are made and constructed from T304 stainless with a custom CNC machined head flange. This is a 4-2-1 Tri-y set up with a 2.5 inch collector. BlackWorks Racing header's have great oil pan clearance, so there is no needed modify or re...
BlackWorks Racing Race Headers - Details
BlackWorks Racing Small Tube Headers
The BlackWorks Racing (BWR) small tube headers are designed and engineered for maximum flow, and horsepower. These headers are made and constructed from T304 stainless with a custom CNC machined head flange. This is a 4-2-1 Tri-y set up with a 2.5 inch collector. BlackWorks Racing headers have great oil pan clearance, so there is no needed modify o...
BlackWorks Racing Small Tube Headers - Details
BlackWorks Racing Swap Headers
The BlackWorks Racing (BWR) K-Swap Race Headers are designed and engineered for maximum flow, and horsepower. These headers are made and constructed from T304 stainless with a custom CNC machined head flange. This is a 4-2-1 Tri-y set up with a 2.5 inch collector. BlackWorks Racing headers have great oil pan clearance, so there is no needed modify ...
BlackWorks Racing Swap Headers - Details
BlackWorks Racing T-Bolt Hose Clamps
Blackworks T-Clamps are made from High Quality stainless steel. They feature a Laser Engraved BWR logo. They also come with a limited lifetime warranty.
BlackWorks Racing T-Bolt Hose Clamps - Details
BlackWorks Racing AN Hoses
Whether you are cruising down the street in your show car or terrorizing the track with your race car you can now rest assured that your fittings will not leak or fail. BWR fittings come standard with their industry leading and unmatched lifetime guarantee.
Features:
High-quality nylon fiber braid cover with excellent flexibility and resi...
BlackWorks Racing AN Hoses - Details
BlackWorks Racing Silicone Coupler Hoses
BlackWorks Racing is now offering their high quality silicone couplers for sale individually.
They are available in a wide variety of sizes and configurations. This allows you to pick and choose which couplers will best suit your project. These are made of the best quality silicone in the industry.
BlackWorks Racing Silicone Coupler Hoses - Details
BlackWorks Racing Billet Series Lower Control Arms
BlackWorks Racing Lower Control Arms were CAD designed by their engineers to be the strongest and best looking LCA the industry has seen. The BWR LCA's are CNC machined from top quality 6061-T6 Aluminum to ensure the highest level of durability, strength and performance. If you are modifying your Honda/Acura's suspension the BWR LCA's are a must. U...
BlackWorks Racing Billet Series Lower Control Arms - Details
BlackWorks Racing Lug Nuts
BlackWorks 2" extended open end forged AL7075 magnesium alloy lug nuts are for serious racers, or your extreme weekend enthusiasts. These are available in 12x1.5mm and 12x1.25mm thread pitch patterns. All lug nuts are hard anodized for strength and durability.
For maximum results, also use the BlackWorks extended wheel studs.
BlackWorks Racing Lug Nuts - Details
BlackWorks Racing Mufflers
The BWR Race Mufflers were designed to out flow and out perform all other mufflers on the market while still retaining a nice quality sound pitch. They are constructed from 304 stainless steel and are masterfully hand tig welded to ensure the highest quality muffler available. Blackworks Race mufflers are available in a 2.36" and a 3" inlets to sui...
BlackWorks Racing Mufflers - Details
BlackWorks Racing Oil Catch Tanks
The BlackWorks Racing (BWR) Race Breather Box Kit is designed to replace the factory PCV system and vent to atmosphere. Their cans are CAD designed and CNC Press Punched using the latest state of the art technology. The -10 Plugs are welded from the inside to top off that ultra clean look. This kit includes all fittings, plugs, clamps, hose and cat...
BlackWorks Racing Oil Catch Tanks - Details
BlackWorks Racing Oil Filler Caps
Blackworks Racing Oil Caps are made from Quality billet aluminum and CNC-Machined to perfection. There are many anodized colors available and more to come.
BlackWorks Racing Oil Filler Caps - Details
BlackWorks Racing Radiator Brackets
Upgrade your stock radiator stay and let it all stand out with the Blackworks Radiator Stay. Made from quality aluminum and made here in the USA! There are many colors to choose from.
Colors Available:
Black
Blue
Gold
Green
Purple
Pink
Red
BlackWorks Racing Radiator Brackets - Details
BlackWorks Racing Silicone Radiator Hoses
When upgrading your engine's performance and horsepower, it is essential to upgrade your cooling system as well. The BWR Radiator Hose Kits are hand crafted to ensure the highest quality. With the newly designed multi-ply (one of the only 4-ply kits on the market) design these hoses will handle the high temperatures and higher pressures produced by...
BlackWorks Racing Silicone Radiator Hoses - Details
BlackWorks Racing Aluminum Radiators
If you're in the market for a high flowing, high performance radiator BlackWorks Racing is your best bet. Do not be fooled by other imitation companies. BlackWorks Racing stands behind their products with a lifetime warranty against manufacturer defects.
BlackWorks Racing Radiators are a great upgrade for your street car, weekend warrior, or...
BlackWorks Racing Aluminum Radiators - Details
BlackWorks Racing Throttle Position Sensors
If you have a broken or malfunctioning TPS sensor, the Blackworks TPS sensor is the resolution to your problems. These are a great choice when ordering your aftermarket throttle body. Each TPS sensor comes with a gasket to provide a moisture barrier preventing damage from water to your sensor.
BWR Throttle Position Sensors come with an indu...
BlackWorks Racing Throttle Position Sensors - Details
BlackWorks Racing Shift Knobs
Blackworks shift knobs are CNC-machined from high grade, billet aluminum, and feature a laser engraved BWR Logo. They are all Made in the USA!
BlackWorks Racing Shift Knobs - Details
BlackWorks Racing Shifter Boots
Made from real Leather. The Blackworks Shift boot offers the last elite look especially with their Dual or Single Bend Shifters and topped with their 440 Gram Weighted shift knob.
BlackWorks Racing Shifter Boots - Details
BlackWorks Racing Shifter Bushings
By using the BWR polyurethane performance bushings, you'll take the slop out of your shifting mechanism and you'll be able to make faster, more consistent shifts.
Features:
Replaces distorted and worn out original rubber bushings even better than new!
Maintains consistent shifts, even in harsh racing environments.
Allows the shifter to ...
BlackWorks Racing Shifter Bushings - Details
BlackWorks Racing Short Shifters
BlackWorks Racing (BWR) billet short shifters are made from a high quality alloy steel. Each of their short shifters is equipped with a non-binding bearing that ensures smoother shifting.
BlackWorks Racing Short Shifters - Details
Blackworks Racing is proud to announce the new addition to their suspension line. Their Progressive lowering springs are CNC-wound and made from high quality SAE 9254 Spring Steel. After their rigorous quality control stages their springs are shot-peen stress relieved, and then sent to powder coating then heat treated.
Their lowering sprin...
BlackWorks Racing Lowering Springs - Details
BlackWorks Racing Front Strut Tower Bars
Blackworks 3 Point Strut Bars are made from High Quality T6061 aircraft grade aluminum. Their Brackets are designed using the most state of the art CAD software in the industry to ensure quality. These are individually handcrafted and TIG Welded for strength and each one is passed through their multipoint quality control divisions.
Designed t...
BlackWorks Racing Front Strut Tower Bars - Details
BlackWorks Racing Rear Strut Tower Bars
Blackworks Strut Bars are made from High Quality T6061 aircraft grade aluminum. Their Brackets are designed using the most state of the art CAD software in the industry to ensure quality. These are individually handcrafted and TIG Welded for strength and each one is passed through their multipoint quality control divisions.
Designed to help p...
BlackWorks Racing Rear Strut Tower Bars - Details
Are you tired of your catylitic converter bogging down your high horspower honda? Is your factory cat old and clogged robbing all the power from you street car? Or do you just simply need a way to attach your exhaust to your header? BWR has the answer for you with their Adjustable Test Pipes.
The straight through design you will gain severa...
BlackWorks Racing Test Pipes - Details
BlackWorks Racing Throttle Bodies
BlackWorks Racing (BWR) billet AL6061 throttle bodies are available for the Honda and Acura D, B, H and F series engines. Their newest design features an aluminum throttle plate to insure no throttle sticking. A stiffer throttle spring and sealed bearings were also added to this new design, by doing that they have gained smoother throttle transacti...
BlackWorks Racing Throttle Bodies - Details
BlackWorks Racing Billet Rear Tie Bars
The Blackworks Racing Billet Rear Tie Bar is CAD designed and machined from precision high quality Aircraft quality 6061 T6 billet aluminum. The Blackworks Tie Bar helps eliminate subframe flex caused by extreme cornering. They are manufactured in the USA and backed with a lifetime warranty. Each bar has a laser engraved logo, and is individually l...
BlackWorks Racing Billet Rear Tie Bars - Details
BlackWorks Racing TOOLS
This special 10 point socket is needed when removing the rear clearance arm on new 2001 and up Honda Civics and Acura RSX's.
BlackWorks Racing TOOLS - Details
BlackWorks Racing Front Tow Hooks
Blackworks Racing Billet Front Tow Hooks are designed using the latest and state of the art CAD design programs in the industry. Their Tow hooks are manufactured in the USA and made from high quality AL6061-T6 billet aluminum. Each tow hook has a laser engraved logo, and also includes a laser engraved individual serialized number to guarantee authe...
BlackWorks Racing Front Tow Hooks - Details
BlackWorks Racing Rear Tow Hooks
Blackworks Racing Billet Rear Tow Hooks are designed using the latest and state of the art CAD design programs in the industry. Their Tow hooks are manufactured in the USA and made from high quality AL6061-T6 billet aluminum. Each tow hook has a laser engraved logo, and also includes a laser engraved individual serialized number to guarantee authen...
BlackWorks Racing Rear Tow Hooks - Details
BlackWorks Racing Rear Subframe Under Braces
Blackworks Racing Billet Rear Sub Frame Braces are designed using the latest and state of the art CAD design programs in the industry. Their Sub Frame Brace are manufactured in the USA and made from high quality 6061-T6 billet aluminum. They will stiffen up your rear end giving your car better steering response and overall rigidity. Each one has a ...
BlackWorks Racing Rear Subframe Under Braces - Details
BlackWorks Racing Titanium Valve Spring Retainers
BlackWorks CNC machined retainers are made from the highest grade titanium available. BlackWorks Ti retainers are machined to exact specs to help reduce the overall weight of the valvetrain, in result of the reduced weight, RPM's increase. BlackWorks retainers provide some of the greatest assurance from premature wear associated with high RPM's.
...
BlackWorks Racing Titanium Valve Spring Retainers - Details
BlackWorks Racing Valve Springs
BlackWorks dual valve springs are made from a chrome silicone alloy. These dual valve springs are designed and engineered for both high performance race/street conditions. BlackWorks dual valve springs provide maximum lift while preventing valve float and helps counter the effects of spring surge. These are a great match for naturally aspirated and...
BlackWorks Racing Valve Springs - Details
BlackWorks Racing Aluminum Velocity Stacks
Blackworks Racing Velocity Stacks are Spun from 1/8" thick T6061 Aluminum Alloy. This results in increased Air Flow and reduced lag on Turbocharged engines. Each one is 100% Made In The USA!
BlackWorks Racing Aluminum Velocity Stacks - Details
BlackWorks Racing Wheel Studs
BlackWorks Racing (BWR) heated-treated 8740 chrome moly wheel studs have a tensile strength of 190,000 psi and are able to easily handle extreme loads and lateral forces found in road/drag racing.
BlackWorks racing wheels studs are sold in packs of 16 or 20. They are available in thread size 12X1.5mm with a length of 3.25". Lug nuts are not...
BlackWorks Racing Wheel Studs - Details
BlackWorks Racing performance parts & accessories at HorsepowerFreaks
blackworks racing performance parts & accessories at horsepowerfreaks. Install and installation help available for parts and accessories for these BMW years.
