FJO performance parts & accessories at HorsepowerFreaks

VIEWED MODELS

SHOP BY VEHICLE

SHOP BY BRAND

Back

FJO Parts and Accessories

FJO Boost Controller Solenoids

- air or inert gas - pressure range: 862 kPa gauge (125 psig) - ports: three 1/8"-27 NPSF - overall weight: 116 g - temperature range: 0 to 50 C ambient - flow rate: 4.72 liters/second at 689 kPa gauge (Cv = 0.122) - excitation: 0.33 amps @ 12 volts
FJO Boost Controller Solenoids - Details

FJO Boost Gauges

These gauges are digital with numerical and bar graph analog representations. The use of ultra-high intensity light emitting components facilitates easy viewing by drivers, even in bright sunlight. They can be readily mounted in a standard 2 1/16 inch (52mm) gauge pod. Automatic Peak/Hold Ultra-high intensity LED's for easy viewing in dayligh...
FJO Boost Gauges - Details

FJO with Sensor Boost Gauges

FJO EGT Gauges

FJO Racing Products is very pleased to announce the design and release of a series of stand-alone gauges for the automotive enthusiast. These products are styled after the very popular gauge prepared for the FJO Wideband AFR System and are available in a variety of models. The gauges are engineered to work with or independently of other FJO product...
FJO EGT Gauges - Details

FJO Fuel Pressure Gauges

FJO Map Sensors

Details: Laser-welded STAINLESS STEEL package, -40 C to +125 C calibrated, 1/8NPT-27 MALE pressure port, 7/8"" HEX, 2.85"" overall length. Includes assembled sensor connector with 6 foot cable and hose barb adapter.
FJO Map Sensors - Details

FJO Progressive Mini Nitrous Controllers

FJO's Progressive Nitrous Mini-Controller combines the functions of our 2-Stage TPS and RPM window switch and our high current solenoid driver all into one very compact module. It can progressively drive two channels, each with a 40 amp load capacity (continuous duty). The device also supports low-voltage OEM, V10 or 3 cylinder TACH signals without...
FJO Progressive Mini Nitrous Controllers - Details

FJO Nitrous Pressure Gauges

FJO Sensors

Sensors for FJO Gauges: FJO High Pressure sensors: Laser-welded Stainless Steel, calibrated from -40 to 125 degrees Celsius, 1/8 NPT-27 Male Pressure port, 7/8" HEX, and 2.85" overall length. FJO Standard Thread Temperature sensors: -40 to 135 degrees Celsius (-40 to 275F), 3/8-18NPT Male, 1/4" HEX, and 2.25" overall length. FJO Metric Th...
FJO Sensors - Details

FJO Solenoid Installation Kits

Includes threee brass 3/16" ID hose adapters, assembled solenoid connector, and 13 feet of color coded 18AWG wires with 341B connector pins pre-crimped.
FJO Solenoid Installation Kits - Details

FJO Temperature Gauges

Ultrabright Combined LED Digital and LED bar, 2 1/16" round format gauge. Available in Fahrenheit (-40 to 302) or Celsius (-40 to 150). FJO includes the gauge, bracket, and wiring. Sensor sold separately
FJO Temperature Gauges - Details

FJO Water-Methanol Injection Filters

High pressure, stainless body, sintered stainless filter element, 316 Stainless Steel, compression fittings for 1/4" tube.
FJO Water-Methanol Injection Filters - Details

FJO Water-Methanol Solenoids

High speed solenoid valve with precision ultra-fine atomizing nozzle for water injection, 3/8 NPT with 1/4" hose fitting, 316 Stainless Steel (From 300-800HP)
FJO Water-Methanol Solenoids - Details

FJO Wideband Displays

FJO Racing Electronics has enhanced the capabilities of its wildly successful Wideband AFR Analysis System with the release of a dash-mounted gauge that will allow users to visually monitor the Air Fuel Ratio while driving. The AFR will be displayed as a 3-digit numeric as well as a dot-mode graph with eleven to fifteen, thus providing faster visu...
FJO Wideband Displays - Details

FJO Wideband Kits

Why do I need a Wideband AFR Analysis System? Whether you're building a high performance street car or an all out race car, proper tuning is critical for maximum reliable power and torque. In the old days EGT (Exhaust Gas Temp) gauges, narrow band O2 sensors, and spark plug reading were the only means to get information about what AFR (Air Fuel ...
FJO Wideband Kits - Details

FJO Controller Installation Kit Wideband Sensor Accs

This can be purchased separately or as a Kit shown above. Includes assembled controller connector, and 2 meters (6 feet) of color coded 16 AWG wires in "pig tail" form.
FJO Controller Installation Kit Wideband Sensor Accs - Details

FJO Misc FJO Wideband Sensor Accs

The following are accessories that work with the Wide-Band O2 sensors and controllers. These can be purchased separately or as a Kit shown above.
FJO Misc FJO Wideband Sensor Accs - Details

FJO Wide Band O2 Extension Kit Wideband Sensor Accs

High Temperature, Shield cable to connect WBAFR Controller to o2 Sensor. Compatible with KWB3001, KWB3002, KWB3044 kits, and 341B2 Engine Management System ONLY.
FJO Wide Band O2 Extension Kit Wideband Sensor Accs - Details

FJO Wideband Sensor Controllers

Option 2: Includes mini wideband AFR controller (single channel, with RPM input), wiring harness, oxygen sensor bung and plug, a PC serial cable, and software CD. Dual analog outputs provide FJO legacy and user configurable output curves. Order sensors, sensor cables and other options separately.
FJO Wideband Sensor Controllers - Details

FJO Wideband Sensors

Requires a wideband controller for operation. Go to wide-band O2 Kits to purchase the controller.
FJO Wideband Sensors - Details