VIEWED MODELS
SHOP BY VEHICLE
Select A Year 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977 1976 1975 1974 1973 1972 1971 1970 1969 1968 1967 1966 1965 1964 1963 1962 1961 1960
Back
GM Parts and Accessories
GM 2 Bar Map Sensors
This map sensor is only good up to 14 PSI. Good for aftermarket turbo kits running 6-9psi.
Click www.aempower.com/bbs/viewtopic.php?t=26 for install instructions for the GM Map sensor for the 93-98 Supra.
For GM Map sensor, go to options -> full list -> MAP kPa C =0, MAP Kpa m=300, MAP max = 4.98V, MAP min = .35V
To change boost settings on Y...
GM 2 Bar Map Sensors - Details
GM 3 Bar Map Sensors
You can run the factory MAP sensor with the AEM ECU, however most are not good for boost conditions. That means your AEM ECU will not be able to add fuel under boost. We highly recommend the GM Map sensor and the Intake Air Temp sensor from GM. The MAP sensor will read pressure differences up to 28psi. The connectors make conecting these units e...
GM 3 Bar Map Sensors - Details
GM Intake Air Temp Sensors
These are the recommended intake air temp sensors for the AEM EMS. You will need an IAT sensor and a connector. These should be installed in your intercooler piping right before the throttle body to minimize heat soak on the sensor.
Instructions for wiring the sensor on a MKIV Supra can be found by clicking here.
GM Intake Air Temp Sensors - Details