High flow aluminum mesh and cotton fiber
Helps direct and straighten the air flow for improved air flow circulation
Oil impregnated helping to trap even the smallest particles
Vortech SuperCharger Air Filters - Details
Our Maxflow Racing Bypass/Blowoff Valve flows 320 CFM @ 8 PSIG and features a compact design that is ideal for imports and others with tight engine compartments. These units will retrofit to standard HKS/Greddy style mounting pads and out performs anything its size. Installation gasket is included. Steel or aluminum mounting flanges are avail...
Vortech Maxflow Blow Off Valves - Details
Vortech Mondo Blow Off Valves
Vortech Maxflow Bypass/Blowoff Valves improve supercharger operations by opening to relieve unwanted pressure during deceleration, this reduces heat build-up and eliminates compressor surge. These units feature a "rolling diaphragm" design which provides ultra-quick valve response along with unmatched reliability.
Vortech Mondo Blow Off Valves - Details
Made from 6061 T-6 billet aluminum with a blue anodized finish and -10 AN inlet/outlet.
Stainless steel reusable 10 micron element (8F102-002).
Includes clamps and hardware.
Vortech Fuel Filters - Details
The FMU is installed just down stream of the stock fuel pressure regulator. It does not control fuel pressure until the engine manifold pressure comes under boost from the supercharger. As the manifold pressure increases, a pressure line from the manifold to the FMU causes the FMU to increase the fuel injector rail pressure. The increased fuel ...
Vortech Universal Fuel Management Units - Details
Vortech Fuel Pumps
Vortech T-Rex fuel pump is designed to maintain a high flow rate at elevated pressures, 50 GPH @ 70 PSI.
High flow in-tank fuel pumps are recommended for engines with more than 10 PSI.
High flow in-tank fuel pumps are direct replacement for factory in-tank fuel pumps.
Vortech Fuel Pumps - Details
Vortech Fuel Rails
Constructed from 6061 T-6 billet aluminum.
1/2" I.D. for ultra high flow, high horsepower applications.
Complete kit for direct bolt-on to stock or modified vehicles.
Allows connection to stock or modified vehicles.
Includes AN fittings and brackets.
Rails are machined for -6 O-ring fittings.
Polished/blue anodized finish fo...
Vortech Fuel Rails - Details
Vortech Ignition Systems
Vortech's stand alone ignition system units allow cockpit adjustment of timing relative to boost. With a knob mounted in either dash or console, the driver can select from 0 to 4 retard per PSI of boost pressure to a maximum total retard of 20 . This allows normal advance while not in boost and provides the greatest combination of performance...
Vortech Ignition Systems - Details
Vortech Mass Air Flow Sensors
Available in 73MM and 80MM
Incorporates interchangeable sample tubes allowing easy field recalibration
Systems are calibrated for the stated injector sizes
Vortech Mass Air Flow Sensors - Details
Lightweight aluminum CNC machined to SAE standards.
Hard anodize coating for long belt and pulley life.
Vortech Crank Pulleys - Details
Vortech Supercharger Belts
Replacement accessory drive belts for your Vortech supercharging system from leading manufactures like Gates and Goodyear.
Vortech Supercharger Belts - Details
Vortech V-1 System Supercharger Kits
Vortech supercharging systems deliver maximum value for your performance dollar. Each system comes fully complete, right down to the wire ties. The following are included with every Vortech supercharging system.(unless otherwise noted):
Compressor matched, computer aided designed and machined Vortech centrifugal supercharger with SQ technology...
Vortech V-1 System Supercharger Kits - Details
Vortech V-1 Tuner Kit Supercharger Kits
Each Vortech supercharging system is designed, tested, and sold to be installed on vehicles in their original or otherwise stock form. They are engineered to deliver maximum performance and long-term engine durability at safe boost levels on stock engines. By taking into consideration variables such as the intended use, climate, altitude, and d...
Vortech V-1 Tuner Kit Supercharger Kits - Details
Vortech V-2 System Supercharger Kits
Vortech supercharging systems deliver maximum value for your performance dollar. Each system is 100% complete, right down to the wire ties. The following items are included with every Vortech supercharging system at the time of purchase (unless otherwise noted):
Compressor matched, computer aided designed and machined Vortech centrifugal sup...
Vortech V-2 System Supercharger Kits - Details
Vortech V-2 Tuner Kit Supercharger Kits
These "tuner kits" include components needed to bolt the system to a stock vehicle, such as cast aluminum mounting brackets, supercharger oil feed and drain, compressor bypass valve and all required fasteners are included. These systems do not come with fuel pump, fuel injectors or computer tuning, which must be installed for proper vehicle ope...
Vortech V-2 Tuner Kit Supercharger Kits - Details
Vortech V-3 System Supercharger Kits
All Vortech street supercharger systems are designed to work with stock engines and all emissions equipment. If more performance is desired, upgrades to the injectors, heads, cams, intake manifolds, computers, mass air flow sensors, etc. can be built into the engine.
NOTE: Vortech supercharger systems are designed for 100% stock vehicles. A...
Vortech V-3 System Supercharger Kits - Details
Vortech V-7 System Supercharger Kits
Vortech supercharging systems offer maximum value for your performance dollar. Each system is 100% complete, right down to the wire ties. The following items are included with every Vortech supercharging system at the time of purchase (unless otherwise noted):
Compressor matched, computer aided designed and machined Vortech centrifugal superchar...
Vortech V-7 System Supercharger Kits - Details
Vortech Supercharger Pulleys
Made of 6061 T-6 aluminum, hard anodized and built to SAE standards.
CNC machined for maximum surface contact.
Requires retainer assembly for installation (not included with pulleys).
Vortech Supercharger Pulleys - Details
Vortech Aftercoolers