The AMS Stroker Kit increases the displacement of your 4G63 from 2.0 liters to 2.3 increasing torque output by 10-15%. The increase in torque will result in spool up 400-500 rpm sooner than the 2.0. Road racers will pull through corners better and drag racers will pull harder down the 1320 with the added torque. Take some advice from the V-8 guys: "There is no replacement for displacement"
Kit Includes:
New Crankshaft
Manley Rods
Ross Pistons
ARP Main studs
Crank & Connecting Rod Bearings
Specifications:
Displacement: 2.3 liters / 2300CC
Stroke: 100mm
Compression Ratio: 8.9:1
Recommended Max Engine Speed
7800 rpm Road Racing (endurance)
8200 rpm Drag Racing
Notes
Due to the increase in stroke you will have to slightly clearance the inside of your engine block when installing this or any other stroker kit. These two contact points will become apparent after you install the rotating assembly and carefully turn the crankshaft.
