For all APEX Boost Controllers. This will also work with the AEM ECU.
If you use this with the AEM ECU, set the frequency to 30Hz in the AEM. Run the Red wire to ignition power. Run the black wire to pin E9-60 (for 93-98 Supra) on the AEM.
On the boost control solenoid itself, if you're using an external wastegate, run the COM side to the TOP port on the wastegate. Run the NC port to the Side port on the wastegate and T off this line and run it into the IC pipe right after the turbo.
Apexi Boost Controller Solenoids from HorsepowerFreaks
apexi boost controller solenoids from horsepowerfreaks boost controller solenoids. Install and installation help available for parts and accessories for these model years.
(10 of 10)