The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 2500C or 4820F.
The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks.
The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.
Notes
Head gaskets sold individually, please call our sales line at (503) 256-5600 if you have any questions.
the only thing wrong with the cometic head gasket is the 2 rivets that have to be removed for correct fittment. I have had the head gasket in place for 2 months now with out any problems.
10
08/15/2010
Civic
It was perfect
10
05/09/2010
Integra
Product was great
10
03/12/2010
MR2
I got this fast, it was easy to install had legible instructions, and was packaged great! Im sooooo glad to have my car running again
9
10/30/2009
Tacoma
The gasket fit perfectly and is still working. The product mentioned was easy to find and described well on the site. I recommend shopping here.
10
10/30/2009
Supra
It was the correct headgasket i got from you, but the picture on this page is of an 4 cyl not a 6 cyl so this picture is not correct. Have used this cometic gasket before and have had no problems with them.
1
10/29/2009
MR2
Before installing, I asked Cometic for clarification on surface prep. They sent some garbage about nanospheres, but nothing usable. When I installed it . . it leaked like a screen door. Also did not fit like it was built for the specific engine installed on. A very Poor fit. Epic Fail.
Of course you lovely people will never publish this. Do a web search on "Leaking Cometic, or Cometic Failure". And read the tea leaves for the future of Cometic.
10
06/22/2009
Civic
5
06/14/2009
CRX
product was easy to install. Only lasted two months for me and already blew.
9
04/12/2009
Integra
i still havnt started the motor im building yet i guess everyone is feelin the econo crunch. but it bolted up great still keepin my fingers crossed. keep it up man
eagle cometic head gaskets from horsepowerfreaks head gaskets. Install and installation help available for parts and accessories for these Eagle years.
(9.1 of 10)