All Nitrous Kits (639)DEI All DEI Parts
Nitrous Kits - PLEASE SELECT YOUR VEHICLE IN THE UPPER LEFT
Zoom DEI

DEI Ny-Trex Nitrous Kits





Triple Threat Wet Nitrous System
Ny-Trex is proud to introduce the next phase of nitrous innovation, the Triple-Threat wet nitrous system. This system combines all three valve functions: Purge, N20 and fuel in one easy to install component. The Triple-Threat is a precision machined billet body with three integral solenoid valves with Volt-Trap coils for a dependable, clean, all-in-one nitrous system.

Ny-Trex nitrous systems use only the highest quality materials and components to produce the best looking, best performing and most reliable wet system around. Ny-Trex exclusive Triple-Threat systems have been thoroughly dyno-tested on numerous vehicles to ensure the most safe and reliable performance possible.

Complete Systems Include:
  • 10 lb Wet-Black powder coated bottle
  • Liquid Filled Bottle Gauge
  • Fuel Pressure Safety Switch
  • Complete Purge System with V-Spray
  • Chrome 660 Hi-Flo valve with gauge port
  • Braided stainless N2O feed line w/Teflon core
  • 22 x-3 braided stainless nozzle lines, 1 blue, 1 red
  • T-Rex Nozzle & adapter (up to 300+HP)
  • Adjustable HP jetting
  • 15A WOT micro switch
  • Quick-Clamp stainless bottle brackets
  • Mounting hardware, brackets, bolts, screws, clamps, ties
  • Electrical components, wire connectors, relays, switches
  • Drill & tap, fittings, sealant
  • Triple-Threat Valve w/Lifetime Warranty


Special Features
  • Exclusive T-Rex Nozzle with true-blend spray bowl delivers a swirl cone plume at a 110o angle to center the throttle body for an even blend. Flows up to 300+HP yet works great delivering as low as 35 HP.
  • Solenoid valves are made with Volt-Trap coils for stronger, more effi cient power, allows for larger orifice, more flow and works with as low as 9 volts.
  • Plungers are made of high grade alloy with greater tolerances to prevent sticking. The N2O seal is Teflon and a special Viton seal is used for fuel.
  • Dual Taper Jets provide a consistent flow of nitrous and fuel and come in a large array of sizes.
  • Easy install components such as well nuts to install bottle topside, drill bit and tap for fuel connection, Tefl on sealant and easy install Quick-Guide.



Ny-Trex Spray-Plate nitrous systems - Carburated
These systems use the highest quality material and precision machined components to make BIG horsepower, good looks and to create the most reliable carburated V8 plate system around. Ny-Trex Spray-Plate systems utilize a machined billet injector plate installed between the carburator and manifold. High grade stainless spray bars have 80 laser drilled discharge holes (96 for Dominator) that inject both nitrous and fuel precisely into the intake manifold.

Complete Systems Include:
  • 10 lb Wet-Black powder coated bottle
  • Precision machined laser-drilled spray plate
  • Chrome Hi-Flo 660 bottle valve with gauge port
  • Braided stainless N2O feed line w/Teflon core
  • Braided stainless plate lines, 1 blue, 1 red
  • Adjustable HP jetting
  • 15A WOT micro switch
  • Quick-Clamp stainless bottle brackets
  • Mounting hardware, brackets, bolts, screws, clamps, ties
  • Electrical components, wire connectors, relays, switches
  • Fittings, gaskets, carb studs, sealant
  • Lifetime Warranty on solenoids


Special Features
  • Spray-Plates made of 6061 billet with laser-drilled stainless spray bars featuring 80 holes for standard flange Holley 4150 and 96 for the Dominator plate. More holes provide greater HP with less nitrous freeze.
  • Solenoid valves are made with Volt-Trap coils for stronger, more effi cient power, allows for larger orifice, more flow and works with as few as 9 volts and have a lifetime warranty.
  • Plungers are made of high grade alloy with greater tolerances to prevent sticking. The N2O seal is Teflon and a special Viton seal is used for the fuel.
  • Dual Taper Jets provide a consistent flow of nitrous and fuel and come in a large array of sizes.
  • Easy install components such as well nuts to install bottle topside, carb studs, plate gaskets, Teflon sealant and easy install Quick-Guide





Diesel Dry Nitrous System
Ny-Trex is proud to introduce the next phase of nitrous innovation for the ever popular diesel market. The Big-Diesel Dry Nitrous System allows you to turn that Black Smoke from performance tunes into horsepower and torque. Ny-Trex nitrous systems use only the highest quality materials and components and have been thoroughly dyno-tested on numerous vehicles to ensure the most safe and reliable performance for your diesel.

Complete Systems Include:
  • Big-Dry Nozzle & adapter (up to 200+HP)
  • Adjustable HP jetting
  • 10 lb Wet-Black powder coated bottle
  • Chrome Hi-Flo 660 bottle valve w/gauge port
  • Quick Clamp stainless bottle brackets
  • Braided stainless lines
  • Switch controls, relay, and wiring
  • Hose, clamps, ties, fittings, sealant
  • Brackets, hardware, bolts
  • Easy Step-By-Step instruction book
  • Lifetime Warranty Hot-Shot N20 solenoid


Dry nozzles are precision machined from 6061 billet and feature unique 110 swirl cone pattern. Big-Dry nozzle is 1/8 npt for diesel and big HP



Dry-Trex Systems
Adding a Dry-Trex EFI Dry Nitrous System is one of the easiest and most cost effective ways to improve performance of any late model EFI vehicle. This system sprays nitrous only and allows the vehicles computer system to enrich the fuel as needed. Dry-Trex systems have been thoroughly dynotested on numerous vehicles to insure the most safe and reliable performance possible on any vehicle.

Complete Systems Include:
  • Dry-Trex Nozzle & adapter (up to 175+HP)
  • Adjustable HP jetting
  • 10 lb Wet-Black powder coated bottle
  • Chrome Hi-Flo 660 bottle valve w/gauge port
  • Quick Clamp bottle brackets
  • Braided stainless lines
  • Switch controls, relay, and wiring
  • Hose, clamps, ties, fittings, sealant
  • Brackets, hardware, bolts
  • Easy Step-By-Step instruction book
  • Lifetime Warranty Hot-Shot N20 solenoid


Dry nozzles are precision machinedfrom 6061 billetand feature unique 110˚swirl cone pattern. Dry-Trex nozzle is 1/16” npt for most applications.



EFI Wet Nitrous Systems
Ny-trex is proud to offer the all new EFI 4, 6 and 8 cylinder wet nitrous systems. Ny-Trex EFI wet nitrous systems use only the highest quality materials and components to produce the best performing, best looking and most reliable wet system around.

Ny-Trex systems have been throughly dyno-tested on numerous vehicles to ensure the most safe and reliable performance possible.

Complete Systems Include:
  • 10 lb Wet-Black powder coated bottle
  • Chrome Hi-Flo 660 bottle valve with gauge port
  • Braided stainless N2O feed line w/Tefl on core
  • 22”x-3 braided stainless nozzle lines, 1 blue, 1 red
  • T-Rex Nozzle* & adapter (up to 300+HP)
  • Adjustable HP jetting
  • 15A WOT micro switch
  • Quick-Clamp stainless bottle brackets
  • Mounting hardware, brackets, bolts, screws, clamps, ties
  • Electrical components, wire connectors, relays, switches
  • Drill & tap, fittings, sealant
  • Hot-Shot N2O & fuel valves
  • Lifetime warranty on solenoids


Special Features
  • Exclusive T-Rex Nozzle* with true-blend spray bowl delivers a swirl cone plume at a 110o angle to center the throttle body for an even blend. Flows up to 300+HP yet works great delivering only 35 HP.
  • Nozzle has unique faceted spray tip to pass air around the nozzle without disrupting the spray pattern.
  • T-Rex is the highest fl owing nozzle available with .110 fuel and nitrous passages that can deliver over 300 hp with a single nozzle.
  • Flow matched fittings allow for the use of any style flare jets that are currently used in the industry.
  • Solenoid valves are made with Volt-Trap coils for stronger, more effi cient power, allows for larger orifice, more flow and works with as low as 9 volts.
  • Plungers are made of high grade alloy with greater tolerances to prevent sticking. The N2O seal is Tefl on and a special Viton seal is used for fuel.
  • Dual Taper Jets provide a consistent fl ow of nitrous and fuel and come in a large array of sizes.
  • Easy install components such as well nuts to install bottle topside, drill bit and tap for fuel connection, Tefl on sealant and easy install Quick-Guide.


Bare Bones Economy system uses the single Raptor Nozzle, not T-Rex Nozzle.



Split-Shot Systems
Ny-Trex Split-Shot nitrous systems are designed to deliver massive horsepower using the unique Split-Shot valve capable of 700 HP of nitrous flow. The high flow design uses a unique plunger that reduces internal pressure and allows for increased orifice size (.180), greater bottle pressures (up to 1,250 psi) and will draw as little as 3 amps. Typical valve orifice size is much smaller (.125), operates only to 1,000 psi and draws up to 25 amps.

Ny-Trex Split-Shot Dual Spray-Plate systems utilize a 1” thick machined billet injector plate installed between carburetor and intake manifold. The spray bars have 160 laser drilled discharge holes (192 for Dominator) that inject both nitrous and fuel precisely into the intake manifold. Horsepower gain is adjusted by changing the jet sizes to the desired HP level.

Complete Systems Include:
  • Billet Dual Spray-Plate, 160 holes for std. Holley Square Bore Carburetor (4150), 192 holes for Dominator (4500) (up to 700HP)
  • Adjustable HP jetting
  • 10 lb Wet-Black powder coated bottle
  • Chrome Hi-Flo 660 bottle valve w/gauge port
  • Quick Clamp stainless bottle brackets
  • Braided stainless lines
  • Switch controls, relay, and wiring
  • Hose, clamps, ties, fittings, sealant
  • Brackets, hardware, drill, tap, bolts
  • Easy “Step-By-Step” instruction book
  • Billet solenoid brackets
  • Lifetime Warranty on solenoids


Special Features
  • Solenoid valves are made with Volt-Trap coils for stronger, more efficient power, allows for larger orifice, more flow and works with as low as 9 volts.
  • Plungers are made of high grade alloy with greater tolerances to prevent sticking. The N2O seal is Teflon and a special Viton seal is used for the fuel.
  • Dual Taper Jets provide a consistent flow of nitrous and fuel and come in a large array of sizes.
  • Easy install components such as well nuts to install bottle topside, carb studs, plate gaskets, Teflon sealant and easy install Quick-Guide




Split-Shot Viper Dual Nozzle System
Ny-Trex Split-Shot nitrous systems are designed to deliver massive horsepower using the unique Split-Shot valve capable of 700 hp of nitrous flow. The High flow design uses a unique plunger that reduces internal pressure and allows for increased orifice size (.180), greater bottle pressures (up to 1,250 psi) and will draw as little as 3 amps. Typical valve orifice size is much smaller (.125), operates only to 1,000 psi and draws up to 25 amps.

Ny-Trex Split-Shot Viper Dual Nozzle Systems utilize 2 Hi-Flo T-Rex Injector nozzles installed between the MAF and dual throttle bodies. The T-Rex spray nozzle has a unique 110˚ swirl cone spray pattern to inject both nitrous and fuel precisely into the intake manifold. Horsepower gain is adjusted by changing the jet sizes to the desired HP level.

Complete Systems Include:
  • Dual T-Rex Nozzles
  • Split-Shot Valve System
  • Billet Solenoid Brackets
  • Adjustable HP Jetting
  • 10 lb Wet-Black powder coated bottle
  • Chrome Hi-Flo 660 bottle valve w/gauge port
  • Quick-Clamp stainless bottle brackets
  • Braided stainless lines
  • Switch controls, relay, and wiring
  • Hose, clamps, ties, fittings, sealant
  • Brackets, hardware, drill, tap, bolts
  • Easy “Step-By-Step” instruction book




Bare Bones Systems
Bare-Bones Nitrous Systems use top quality components with an emphasis on performance and price. These Ny-Trex Systems have many of the great features offered in our top line systems and have been thoroughly dyno-tested on numerous vehicles to insure the most safe and reliable performance possible at any price.

Bare-Bones EFI Economy Wet Nitrous System uses the Raptor wet Nozzle (up to 175hp)

Bare-Bones Economy Carb Plate System uses the Bare-Bones 4150 plate (up to 200hp)

Each Complete Bare Bones Systems Include:
  • Adjustable HP jetting
  • 10 lb Wet-Black powder coated bottle
  • Hi-Flo 660 bottle valve
  • Bottle brackets
  • Braided stainless lines
  • Switch controls, clamps, fittings & hose
  • Brackets, hardware, bolts
  • Easy “Step-By-Step” instruction sheet
  • Lifetime Warranty on solenoids





Prime-Time Show Purge Kit
Be the envy of the nitrous world and show off your Ny-Trex prowess with this complete Prime Time show purge kit. Comes complete with all hardware, braided stainless lines and 10 lb. nitrous bottle for complete and easy install.





Nitrous Pro Accessories Kit
NyTrex accessories are precision made from the finest materials then maticulously tested to perform at the highest level possible.

Includes:
  • Fuel Pressure Safety Switch
  • V-Spray Purge Block
  • Purge System
  • Accu-Pressure Bottle Heater System
  • Liquid Filled Bottle Gauge
  • Gauge Port




Universal DEI Nitrous Kits
MSRPPrice
Bare-Bones 4150 Economy Spray-Plate Nitrous System$654.36$556.21  Add to Cart
Bare-Bones EFI Economy Wet Nitrous System$654.36$556.21  Add to Cart
Big Diesel Dry Nitrous System$744.94$633.20  Add to Cart
Dry-Trex - EFI 4 & 6 Cyl. Dry Nitrous System$744.94$633.20  Add to Cart
Dry-Trex - EFI V8 Dry Nitrous System$744.94$633.20  Add to Cart
EFI Wet Nitrous System - 4 & 6 Cyl.$812.80$690.88  Add to Cart
EFI Wet Nitrous System - V8$812.80$690.88  Add to Cart
Hot-Shot 4150 Spray-Plate Nitrous System$737.09$626.53  Add to Cart
Nitrous Pro-Accessories Kit$482.50$410.12  Add to Cart
Phat-Shot 4150 Spray-Plate Nitrous System$848.08$720.87  Add to Cart
Phat-Shot 4500 Spray-Plate Nitrous System$848.08$720.87  Add to Cart
Prime-Time Show Purge Kit$439.77$373.80  Add to Cart
Split-Shot 4150 - Dual Cross Bar Nitrous System$1,325.03$1,126.27  Add to Cart
Split-Shot 4500 - Dual Cross Bar System$1,325.03$1,126.27  Add to Cart
Split-Shot Viper Dual Nozzle Wet Nitrous System$1,282.30$1,089.95  Add to Cart
Triple-Threat - V8 EFI Wet Nitrous System$1,085.03$922.27  Add to Cart
Triple-Threat 4 & 6 Cyl EFI Wet Nitrous System$1,085.03$922.27  Add to Cart
Triple-Threat V8 Spray-Plate Nitrous System$1,043.47$886.95  Add to Cart
 
DEI Ny-Trex Nitrous Kit Reviews

This product has not yet been rated.  Write Review
 

Have you seen these Nitrous Kits?

Parts Available: 110006, 110005, 110037, 110008, 110009, 110010, 110012, 110016, 110091, 110018, 110020, 110086, 110021, 110022, 110023, 110026, 110025, 110027