Click to shop ecu tuning       
All Intercoolers (1,386)ETS All ETS Parts
ETS Evo 8 and 9 Intercoolers Zoom ETS

ETS Evo 8 and 9 Intercoolers

The ETS Lancer EVO Intercooler is the best on the market, bar none. It features bolt on installation, eliminates the two up-pipes to the intercooler and fills the whole grill with core for a killer look and maximum efficiency. This unit also retains the factory crash bar and splash pans (3" and 3.5"). The kit includes the intercooler, mounting hardware, silicone couplers, and SS T-Bolt Clamps.

The ETS EVO Piping kit is designed to eliminate many of the unnecessary bends in the stock piping. ETS' piping starts off by immediately expanding into 2.5" diameter right off of the turbo elbow. This replaces the tiny 1 3/4" factory pipe and instantly frees up 15hp and greatly improves spool up. From here it follows the core support and wraps around to mate up to the intercooler. Once the air passes through the intercooler, the piping takes a short direct path around the core support, over the transmission and straight up to the throttle body. This unique routing is over two feet shorter than the stock routing which results in greatly improved spool up and transient response. With an 11% increase in cross sectional area, flow is increased as well.

  • Pressure Checked at 35psi
  • Bolt on design retains crash beam (3" and 3.5")
  • Full Mandrel Bent 2.5" Piping
  • Ceramic Chrome Powder Coat Finish
  • Short Route: Two feet shorter than stock
  • Lower piping flows over 20% more than stock
  • Upper Piping flows over 12% more than stock
  • 24x11.5x3.0" 1058cfm-700hp at 79% efficiency (Requires Minor Trimming on EVO 8)
  • 24x11.5x3.5" 1127cfm-750hp at 80% efficiency (Requires Minor Trimming on EVO 8)
  • 24x11.5x4.0" 1219cfm-820hp at 81% efficiency (Requires Bumper Beam Trimming)
  • Recirculation kit is only needed for Mini Battery UICP (Stock battery UICP uses stock recirculation pipe)

All Mitsubishi ETS Evo 8 and 9 Intercoolers
View All Mitsubishi EVO Intercoolers
Mitsubishi EVOPrice
(2003-2008) 20"x11.5"x3.0" - (Black)$599.00  Add to Cart
20"x11.5"x3.0" - (Blue)$599.00  Add to Cart
20"x11.5"x3.0" - (Gold)$599.00  Add to Cart
20"x11.5"x3.0" - (Red)$599.00  Add to Cart
20"x11.5"x3.0" - (Standard Finish)$499.00  Add to Cart
20"x11.5"x3.5" - (Black)$699.00  Add to Cart
20"x11.5"x3.5" - (Blue)$699.00  Add to Cart
20"x11.5"x3.5" - (Gold)$699.00  Add to Cart
20"x11.5"x3.5" - (Red)$699.00  Add to Cart
20"x11.5"x3.5" - (Standard Finish)$599.00  Add to Cart
WideTank, 3.0" Core, Standard Finish w/Stencil, Stock Battery, 2.5" Standard Piping w/HKS Flange, Black Couplers, Stock MAF$980.00  Add to Cart
WideTank, 4.0" Core, Standard Finish w/Stencil, Mini Battery, 2.5" Standard Piping w/Stock Flange, Brushed Stainless Piping, Black Couplers, Stock MAF$1,115.63  Add to Cart
ETS Evo 8 and 9 Intercooler Reviews

This product has not yet been rated.  Write Review

Have you seen these Intercoolers?

Parts Available: Evo89 Cusco ICO 3 - Blk, Evo89 Cusco ICO 3 - Blu, Evo89 Cusco ICO 3 - Gld, Evo89 Cusco ICO 3 - R, Evo89 Cusco ICO 3 - Stnd, Evo89 Cusco ICO 3.5 - Blk, Evo89 Cusco ICO 3.5 - Blu, Evo89 Cusco ICO 3.5 - Gld, Evo89 Cusco ICO 3.5 - R, Evo89 Cusco ICO 3.5 - Stnd, EVO89 IC Kit 3.0 - Standard, EVO89 IC Kit 4.0 - Standard