Eibach Pro-Alignment Camber Kits
Ball Joints
These adjustable upper ball joints make front camber adjustment easy for many vehicles with upper control arms. With an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have been lowered for performance/racing applications, or to retain factory ride height. For changes greater than +1.5 degrees, refer to their Extended Range Ball Joints.
Adjustable Ball Joints:
Adjustment range: Up to +/ - 1.50 degrees of Camber
Installation time: .6 hr/side
Required: 1 per wheel
Extended Range Ball Joints:
Adjustment range: Up to +1.50 degrees to +3.00 degrees of Camber
Installation time: .6 hr/side Required: 1 per wheel
Control Arms
These OE style control arms utilize a unique screw-type adjustment feature to easily and accurately change camber and caster while viewing live readings from the alignment machine. These are recommended for use on stock height or lowered vehicles.
Front & Rear Adjustment range: See Applications
Installation time: .8 hr/side
Required: See Applications
Camber Plates
Engineered utilizing a unique, multi-adjustable design, these camber plates fit a wide variety of vehicles. Their camber plates are made from high quality, aircraft grade aluminum, using precision machined adjusters to dial in camber settings. Tuners will find this kit perfect for both high performance street and racing applications.
Strut Mounts
Their strut mounts feature OE style bearings and feature a high quality bonded insulator. Common applications for these are high performance street and racing applications.
Front Adjustment range: See Applications
Installation time: 1.2 hr/side
Required: 1 kit per axle
Camber Bolts
These camber bolts allow both positive and negative camber changes up to 1.5 degrees (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This provides a built-in adjustment feature just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.
Rear Adjustment range: See Applications
Installation time: .4 hr/side
Required: 1 kit per axle
Toe Arms/Adjusters
This OE style toe arm uses a special screw type adjustment feature to easily and accurately change toe settings while viewing live readings from the alignment machine. These are recommended for stock height or lowered vehicles.
Front & Rear Adjustment range: See Applications
Installation time: .8 hr/side
Required: See Applications
Lateral Links
These adjustable lateral links by Eibach allow for up to 1.5 degrees of additional camber and toe adjustment. They are specially designed for performance enthusiasts and can be used on lowered or stock ride height vehicles.
Rear Adjustment range: Up to +/- 1.5 Degrees of Camber.
Up to +/- 1.5 Degrees of Toe.
Installation Time: .8 hr/side
- Priced and sold in sets of 2
|
