Is your stock fuel pump just not cutting it anymore? HPF has now released three different stages of fuel pump systems to cover a wide range of fuel delivery needs. The stock fuel system in the car is only designed to handle the fuel consumption needs of the factory engine, and every power performance modification done to the car will result in a higher fuel consumption. To keep up with these needs the fuel system will need to be upgraded.
Mechanically speaking, all of these kits are direct bolt on systems. Although with any fuel system upgrade, some electronic modifications will be needed to ensure proper function.
These are the same fuel systems that have been used in HPF Turbo Kits for the last four+ years. They have been rigorously road and track tested in extremely high horsepower applications with excellent results. Rest assured when choosing an HPF fuel system you are getting a top of the line performance proven product.
Stage 1 Fuel System
With correctly sized injectors - capable of 620 WHP
Already upgraded your injectors and now your in-tank pump is insufficient? Add our stage 1 in-line pump kit. This kit is everything that you will need to add a secondary in-line fuel pump to prevent fuel starvation in higher horsepower applications. This system will require a fuel pump controller (Not included) such as a engine management system, RPM activated switch, or boost activated circuit.
Stage 1 Kit Includes:
Walbro In-line fuel pump
Walbro fuel pump install kit
Edelbrock Fuel Filter
All fittings and adapters needed for install
Stage 2 Fuel System
Successfully operated at 620 WHP
The stage 2 fuel system adds correctly sized fuel injectors to the already proven stage 1 system. because of the larger fuel injectors included with the stage 2 kit, a tuning solution such as a fuel trimming controller or engine management system will be necessary in addition to the fuel pump controller required with the stage 1 kit.
Stage 2 Kit Includes:
6 - FIC 1100cc High Impedance Fuel Injectors
Walbro In-line fuel pump
HPF fuel pump install kit
Edelbrock Fuel Filter
All fittings and adapters needed for install
Stage 2.5 Fuel System
Successfully operated at 725+ WHP
The stage 2.5 fuel system is a combination of the stage 1 and stage 2 kits with the addition of the HPF In-tank fuel pump system. The in-tank fuel pump is activated as the factory pump would be, meaning no additional controllers are needed. However, a fuel trimming controller or engine management system will be necessary for the up-rated injectors, along with a fuel pump controller for the in-line fuel pump.
Zoom 
Stage 1 Fuel System
Stage 2 Fuel System
Stage 2.5 Fuel System