Click to shop ecu tuning       
All Exhaust Wraps (150)Heatshield Products All Heatshield Products Parts
Exhaust Wraps - PLEASE SELECT YOUR VEHICLE IN THE UPPER LEFT
Heatshield Products Exhaust Wrap Zoom Heatshield Products

Heatshield Products Exhaust Wrap

  • Overview
  • Details
  • Images

Exhaust insulating heat wraps, heat shields, and racing header wrap. Retaining heat the your exhaust system, can not only protect vital components, but improve horsepower, lower air intake temperatures, and more.

Please click a product below to see it's details...

Black Exhaust Wrap

INSULATION TYPE: Insulator, keeps heat in
USES: Exhaust Pipe Wrap, Header Wrap
RATED TO:

Black exhaust wrap is designed to be wrapped around your header or exhaust system. This heat wrap, maintains hotter exhaust gases, decreases the density, and that allows the exhaust gas to exit the system faster! Increased exhaust scavenging is produced and helping to lower intake temperatures: that equals more horsepower. Black exhaust wrap also reduces radiant heat damage and can lower under hood temperatures by as much as 50%. This exhaust wrap features a a new proprietary black coating, it holds its color longer than similar graphite coated wraps. It can withstand 1200F continuous and 2000F intermittent. The black exhaust wrap can be fastened with Thermal-Tie, hose clamps, or wire.

This black exhaust wrap is asbestos free and is made from a base high quality fiberglass yarn. Black exhaust wrap is noncombustible and it is also water and fungus resistant.

  • Rated for 1200F continuous use, 2000F intermittent.
  • Reduces under hood temperatures up to 50%
  • Increases horsepower
  • All rolls 1/16" thick
  • Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
  • Made in the USA
  • Bulk rolls of black exhaust wrap and private labeling available


Cobra Skin Exhaust Wrap

INSULATION TYPE: Insulator, keeps heat in
USES: Exhaust Pipe Wrap, Header Wrap
RATED TO:

Cobra Skin exhaust wrap features a special weave making it easier to wrap around bends in pipes compared to conventional exhaust wraps. The special weave also gives this exhaust wrap a carbon fiber look after it has been installed! Exhaust heat wrap maintains more heat in the exhaust system, this makes exhaust gases hotter, that allows the exhaust gas to exit the system faster! This increases exhaust scavenging, pulling intake and exhaust gases through the system faster, helping to lower intake temperatures: that equals more horsepower. Cobra Skin wrap also reduces radiant heat damage and can lower under hood temperatures by as much as 50%. Lower ambient underhood temperatures can lead to even lower intake temperatures. Cobra Skin exhaust heat wrap can withstand a real world rating 1200F continuous and 2000F intermittent.

This exhaust wrap is asbestos free and is made from a base high quality fiberglass yarn. Cobra Skin wrap is noncombustible it is also water and fungus resistant.

  • Withstands 1200F continuous, 2000F intermittent
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look
  • Cobra Skin Exhaust wrap reduces under hood temperatures up to 50 percent
  • Exhaust wrap increases scavenging, resulting in more horsepower
  • All rolls of exhaust wrap are 1/16 inch thick
  • Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling Cobra Skin
  • Made in USA

Exhaust Wrap

INSULATION TYPE: Insulator, keeps heat in
USES: Genset exhaust insulation, Exhaust Pipe Wrap, Header Wrap
RATED TO:

Exhaust wrap maintains hotter exhaust gases, decreases the density, and that allows the exhaust gas to exit the system faster! Increased exhaust scavenging is produced helping to lower intake temperatures: that equals more horsepower. Exhaust wrap also reduces radiant heat damage and can lower under hood temperatures by as much as 50 percent. Header heat wrap also keeps heat out of the drivers compartment and reduces heat damage to other components. This exhaust wrap features a vermiculite coating which makes it capable of withstanding 1200F continuous and 2000F intermittent. Our exhaust wrap can be fastened with Thermal-Tie, hose clamps, or wire.

This exhaust wrap is asbestos free and is made from a base high quality fiberglass yarn. Exhaust heat wrap is also water and fungus resistant. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.

  • Rated for 1200F continuous use, 2000F intermittent
  • Exhaust wrap reduces under hood temperatures up to 50 percent
  • Exhaust wrap Increases horsepower
  • All rolls of exhaust wrap are 1/16 inch thick
  • Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling Exhaust Wrap
  • Exhaust Wrap is made in the USA
  • Bulk wrap and private labeling available, minimums apply

Cobra Skin Exhaust Wrap

INSULATION TYPE: Insulator, keeps heat in
USES: Exhaust Pipe Wrap, Header Wrap
RATED TO:

HP Color Exhaust Wrap features a color ceramic coating which not only gives your vehicle that custom look, but it also increases the life of the colored exhaust wrap by as much as 3 times! Wrapping the header and exhaust system with HP's colored exhaust wrap maintains hotter exhaust gases, decreases the density, and that allows the exhaust gas to exit the system faster! Greater exhaust scavenging is produced helping to lower intake temperatures: that equals more horsepower. HP Color Exhaust Wrap also reduces radiant heat damage and can lower under hood temperatures by as much as 50%. Our colored exhaust wrap withstand 1200°F continuous and 2000°F intermittent. Colored header and exhaust wrap can be fastened with Thermal-Tie™, hose clamps, or wire. HP Color Exhaust Wrap is available in blue, red, yellow, black, silver, purple, and green.

  • Rated for 1200°F continuous use, 2000°F intermittent.
  • Reduces under hood temperatures up to 50%
  • Increases horsepower
  • All rolls 1/16" thick

PLEASE NOTE: Your exhaust wrap will smoke after installation, it will eventually stop. Smoke is a normal by product of the curing process; your wrap will not burst into flames. HP Color Exhaust Wrap will discolor after installation and turn brown, this is a normal part of the color coating curing process. The brown color will disappear, intervals will vary with exhaust temperatures. Cooler burning exhaust systems can take up to 5 days of normal use before the color coat completely cures, hotter exhaust systems may take only 30 minutes.


Inferno Header Wrap Wrap

INSULATION TYPE: Insulator, keeps heat in
USES: Header pipe exhaust wrap, Exhaust heat shield wrap, Header Wrap
RATED TO:

Tired of your "Brand X" advertised 2000F header wrap becoming brittle and falling apart? Look no further than HP Inferno Header Wrap to solve the problem. Unlike fiberglass and basalt exhaust wraps (which should have an advertised operating temperature of 1200F); the Inferno Header Wrap is made from silica filament yarn making this header wrap strong and flexible while operating at its designed operating temperature of 2000F continuous and 3000F intermittent. Inferno Header Wrap will sustain the extreme temperatures that your glowing pipes from turbo, down pipe, header, manifold or racing applications require. Simply put there is not a header or exhaust wrap on the market that will take higher temperatures and last longer. You can actually wrap the header with Inferno Wrap, run it, heat it up, and then unwrap the Inferno Wrap from the header when needed. Fasten header wrap with Thermal-Tie, hose clamps, or wire.

This header wrap is asbestos free and is made from a base high quality silica yarn. Header heat wrap is also water and fungus resistant it is also noncombustible.

  • Rated for 2000F continuous use, 3000F intermittent
  • Reduces under hood temperatures up to 50 percent
  • Increases horsepower
  • Great turbo manifold wrap
  • Header heat wrap rolls are 1/16 inch thick
  • Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
  • Proudly made in the USA

Lava Wrap

INSULATION TYPE: Insulator, keeps heat in
USES: Exhaust Pipe Wrap, Header Wrap, Turbo Manifold Heat Shield
RATED TO:

Made from crushed volcanic rock, the Lava Exhaust Wrap has all the same benefits as fiberglass heat wraps with that trick carbon fiber look and improved durability! Lava Exhaust Wrap is 25% stronger than fiberglass exhaust wraps, giving it a prolonged life and greater durability. We call is Lava Exhaust Wrap, because basalt is a byproduct of magma, or also called lava. The raw basalt yarn, is naturally chemical and water resistant, in fact it is so strong it is sometimes referred to as a titanium fiber or wrap. Wrapping the header and exhaust system maintains hotter exhaust gases, decreases the density of the gas, and that allows the exhaust gas to exit the system faster! Increased exhaust scavenging is produced, sucking out of the system faster and pulling intake gasses in faster, keeping them cooler, lower air intake temperatures give you more horsepower! Volcanic header wrap also reduces radiant heat damage and can lower under hood temperatures by as much as 50%. Our Lava Wrap withstands 1200F continuous (please note this is a real world tested rating, please don't believe over inflated temperature ratings of similar basalt/volcanic rock products) and 2000F intermittent. Our volcanic exhaust wrap can be fastened with Thermal-Tie, hose clamps, or wire.

Lava Wrap is asbestos free and is made from a base high quality basalt yarn is also chemical, acid, water and fungus resistant in addition it is also noncombustible.

  • Rated for 1200F continuous use, 2000F intermittent
  • Reduces under hood temperatures up to 50 percent
  • Increases horsepower
  • All rolls of lava exhaust wrap are 1/16 inch thick
  • Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
  • Made in the USA

Premium / Premium Black Exhaust Wrap

INSULATION TYPE: Insulator, keeps heat in
USES: Exhaust Wrap, Exhaust Pipe Wrap, Header Wrap
RATED TO:

Premium exhaust wrap maintains hotter exhaust gases, this decreases the gas density, and that allows the exhaust gas to exit the system faster! This increases exhaust scavenging, pulling intake and exhaust gases through the system faster, helping to lower intake temperatures: that equals more horsepower. Premium exhaust wrap also reduces radiant heat damage and can lower under hood temperatures by as much as 60%. Lower overall under hood temperatures can further reduce your intake temperatures, and that can further increase horsepower and efficiency. Our premium exhaust wrap features a tighter weave than industry standard header wraps, thus retaining more heat, fraying less, and offering a longer lifespan. Our exhaust header heat wrap can withstand a real world rating 1200F continuous and 2000F intermittent. Premium exhaust wrap can be fastened with Thermal-Tie, hose clamps, or wire.

This exhaust wrap is asbestos free and is made from a base high quality fiberglass yarn. Premium exhaust wrap is noncombustible. It is also water and fungus resistant. Always wear safety glasses and dust mask. Gloves and long sleeves are recommended when handling this exhaust header wrap.

  • Rated for 1200F continuous use, 2000F intermittent
  • Reduces under hood temperatures up to 50 percent
  • Increases horsepower
  • All rolls are 1/16 inch thick
  • Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
  • Made in the USA


Universal Heatshield Products Exhaust Wraps
Price
Black Exhaust Wrap Kit; 2" x 25ft.; w/ (4) 3/16" W x 10" L Ties$44.36  Add to Cart
Black Exhaust Wrap Kit; 2" x 50ft.; w/ (8) 3/16" W x 7.9" L & (2) 3/16" W x 14" L Ties$77.85  Add to Cart
Black Exhaust Wrap; 1" x 100ft.$75.82  Add to Cart
Black Exhaust Wrap; 1" x 25ft.$27.80  Add to Cart
Black Exhaust Wrap; 1" x 50ft.$39.54  Add to Cart
Black Exhaust Wrap; 2" x 100ft.$116.08  Add to Cart
Black Exhaust Wrap; 2" x 15ft.$26.62  Add to Cart
Black Exhaust Wrap; 2" x 25ft.$36.83  Add to Cart
Black Exhaust Wrap; 2" x 50ft.$60.26  Add to Cart
Black Exhaust Wrap; 3" x 100ft.$177.53  Add to Cart
Black Exhaust Wrap; 4" x 100ft.$246.16  Add to Cart
Black Exhaust Wrap; 6" x 100ft.$329.19  Add to Cart
Cobra Skin Black Exhaust Wrap, 1" x 25ft.$40.14  Add to Cart
Cobra Skin Black Exhaust Wrap, 1" x 50ft.$55.72  Add to Cart
Cobra Skin Black Exhaust Wrap, 2" x 15ft.$41.15  Add to Cart
Cobra Skin Black Exhaust Wrap, 2" x 25ft.$51.57  Add to Cart
Cobra Skin Black Exhaust Wrap, 2" x 50ft.$79.19  Add to Cart
Exhaust Wrap Kit; 2" x 25ft.; w/ (4) 3/16" W x 10" L Ties$37.57  Add to Cart
Exhaust Wrap Kit; 2" x 50ft.; w/ (8) 3/16" W x 7.9" L & (2) 3/16" W x 14" L Ties$71.87  Add to Cart
Exhaust Wrap; 1" x 100ft.$69.82  Add to Cart
Exhaust Wrap; 1" x 25ft.$25.75  Add to Cart
Exhaust Wrap; 1" x 50ft.$36.31  Add to Cart
Exhaust Wrap; 2" x 100ft.$103.40  Add to Cart
Exhaust Wrap; 2" x 15ft.$17.77  Add to Cart
Exhaust Wrap; 2" x 25ft.$32.91  Add to Cart
Exhaust Wrap; 2" x 50ft.$54.31  Add to Cart
HP Color Exhaust Wrap; Orange; 2" x 25ft.$71.76  Add to Cart
HP Color Exhaust Wrap; Red; 1" x 50ft.$79.80  Add to Cart
HP Color Exhaust Wrap; Black; 1" x 25ft.$45.83  Add to Cart
HP Color Exhaust Wrap; Black; 1" x 50ft.$79.80  Add to Cart
HP Color Exhaust Wrap; Black; 2" x 25ft.$71.76  Add to Cart
HP Color Exhaust Wrap; Black; 2" x 50ft.$129.18  Add to Cart
HP Color Exhaust Wrap; Blue; 1" x 25ft.$45.83  Add to Cart
HP Color Exhaust Wrap; Blue; 1" x 50ft.$79.80  Add to Cart
HP Color Exhaust Wrap; Blue; 2" x 25ft.$71.76  Add to Cart
HP Color Exhaust Wrap; Blue; 2" x 50ft.$129.18  Add to Cart
HP Color Exhaust Wrap; Green; 1" x 25ft.$45.83  Add to Cart
HP Color Exhaust Wrap; Green; 1" x 50ft.$79.80  Add to Cart
HP Color Exhaust Wrap; Green; 2" x 25ft.$71.76  Add to Cart
HP Color Exhaust Wrap; Green; 2" x 50ft.$129.18  Add to Cart
HP Color Exhaust Wrap; Orange; 1" x 25ft.$45.83  Add to Cart
HP Color Exhaust Wrap; Orange; 1" x 50ft.$79.80  Add to Cart
HP Color Exhaust Wrap; Orange; 2" x 50ft.$129.18  Add to Cart
HP Color Exhaust Wrap; Purple; 1" x 25ft.$45.83  Add to Cart
HP Color Exhaust Wrap; Purple; 1" x 50ft.$79.80  Add to Cart
HP Color Exhaust Wrap; Purple; 2" x 25ft.$71.76  Add to Cart
HP Color Exhaust Wrap; Purple; 2" x 50ft.$129.18  Add to Cart
HP Color Exhaust Wrap; Red; 1" x 25ft.$45.83  Add to Cart
HP Color Exhaust Wrap; Red; 2" x 25ft.$71.76  Add to Cart
HP Color Exhaust Wrap; Red; 2" x 50ft.$129.18  Add to Cart
HP Color Exhaust Wrap; Silver; 1" x 25ft.$45.83  Add to Cart
HP Color Exhaust Wrap; Silver; 1" x 50ft.$79.80  Add to Cart
HP Color Exhaust Wrap; Silver; 2" x 25ft.$71.76  Add to Cart
HP Color Exhaust Wrap; Silver; 2" x 50ft.$129.18  Add to Cart
HP Color Exhaust Wrap; Yellow; 1" x 25ft.$45.83  Add to Cart
HP Color Exhaust Wrap; Yellow; 1" x 50ft.$79.80  Add to Cart
HP Color Exhaust Wrap; Yellow; 2" x 25ft.$71.76  Add to Cart
HP Color Exhaust Wrap; Yellow; 2" x 50ft.$129.18  Add to Cart
Inferno Header Wrap; 1" x 25ft.$53.42  Add to Cart
Inferno Header Wrap; 1" x 50ft.$102.13  Add to Cart
Inferno Header Wrap; 2" x 15ft.$56.57  Add to Cart
Inferno Header Wrap; 2" x 25ft.$83.46  Add to Cart
Inferno Header Wrap; 2" x 50ft.$156.54  Add to Cart
Inferno Wrap; 2" x 100ft.$315.20  Add to Cart
Inferno Wrap; 4" x 100ft.$800.22  Add to Cart
Lava Wrap; 1" x 25ft.$29.63  Add to Cart
Lava Wrap; 1" x 50ft.$46.96  Add to Cart
Lava Wrap; 2" x 100ft.$164.48  Add to Cart
Lava Wrap; 2" x 15ft.$23.46  Add to Cart
Lava Wrap; 2" x 25ft.$48.72  Add to Cart
Lava Wrap; 2" x 50ft.$84.16  Add to Cart
Lava Wrap; 4" x 100ft.$302.78  Add to Cart
Premium Black Exhaust Wrap; 1" x 50ft.$47.02  Add to Cart
Premium Black Exhaust Wrap; 2" x 15ft.$32.46  Add to Cart
Premium Black Exhaust Wrap; 2" x 50ft.$76.05  Add to Cart
Premium Exhaust Wrap Kit; 2" x 25ft.; w/ (4) 3/16" W x 10" L Ties$44.16  Add to Cart
Premium Exhaust Wrap Kit; 2" x 50"; w/ (8) 3/16" W x 7.9" L & (2) 3/16" W x 14" L Ties$83.41  Add to Cart
Premium Exhaust Wrap; 1" x 100ft.$78.42  Add to Cart
Premium Exhaust Wrap; 1" x 25ft.$23.28  Add to Cart
Premium Exhaust Wrap; 1" x 50ft.$37.79  Add to Cart
Premium Exhaust Wrap; 2" x 100ft.$109.33  Add to Cart
Premium Exhaust Wrap; 2" x 15ft.$23.51  Add to Cart
Premium Exhaust Wrap; 2" x 25ft.$37.08  Add to Cart
Premium Exhaust Wrap; 2" x 50ft.$57.55  Add to Cart
Premium Exhaust Wrap; 4" x 100ft.$209.95  Add to Cart
Premium Exhaust Wrap; 6" x 100ft.$265.76  Add to Cart
 
Heatshield Products Exhaust Wrap Reviews

This product has not yet been rated.  Write Review
 

Have you seen these Exhaust Wraps?

Parts Available: 322026, 322051, 321100, 321025, 321050, 322100, 322015, 322025, 322050, 323100, 324100, 326100, 380008, 380009, 380011, 380012, 380013, 312026, 312051, 311100, 311025, 311050, 312100, 312015, 312025, 312050, 315047, 315021, 315014, 315024, 315044, 315054, 315012, 315022, 315042, 315052, 315018, 315028, 315048, 315058, 315017, 315027, 315057, 315016, 315026, 315046, 315056, 315011, 315041, 315051, 315015, 315025, 315045, 315055, 315013, 315023, 315043, 315053, 325001, 325002, 325005, 325025, 325050, 325100, 325400, 371025, 371050, 372100, 372005, 372025, 372050, 372400, 307002, 307004, 307010, 302026, 302051, 301100, 301025, 301050, 302100, 302015, 302025, 302050, 304100, 306100