Hondata FlashPro Engine Management Piggyback

FlashPro Features:

• Programmable ECU interface.
• Connects via OBDII diagnostic port.
• USB 2.0 connection.
• Works with Laptop or Desktop.
• No ECU modification necessary.
• 90 second ECU programming time.
• 20 hours on board datalogging memory.
• FlashProManager Windows software.
• Check and clear diagnostic codes.
• Custom laptop gauges.
• Dual calibration storage - upload from one of two calibrations stored in the FlashPro.


AFM/MAF Based Calibrations

• Ignition, fuel, cam angle, idle speed table editing.
• VTEC window.
• Rev and launch limiters.
• AFM calibration table.
• Map tracing & lambda overlay.
• 15 starting calibrations for common intakes and race header combinations.


MAP Based Calibrations

• Above features plus:
• Expanded fuel, ignition & cam angle tables for forced induction.
• 4 bar MAP sensor support (40 psi).
• 50 degree cam angle movement for more midrange torque (up from 45 degrees maximum).
• Support for larger injectors.
• Injector latency / dead time.
• Individual cylinder fuel & ignition trim.
• Race vehicle sensor disabling.
• Speed limiter removed.
• 50+ starting calibrations for intake, headers, forced induction & injector combinations.

• Make sure that you order the correct FlashPro, and that FlashPro will work with your ECU. It's recommended that your check your ECU is compatible by checking your ECU part number below.