The K-Series Programmable ECU consists of a hardware modification to any K-Series ECU, plus Windows software which allows you to re-program the ECU and datalog sensors.
ECU Notes:
Base maps are included only for K20A2, K20A3 (RSX Base), K20A3 (Civic SI) and K20A engines.
- Support for the manual K20A3 engine and the secondary intake runner as used in the base model RSX and CRV.
- The Japanese PRD and PRC ECU do not support a fuel tank pressure sensor required for some US emissions tests, but will likely pass a tailpipe sniffer test if the catalytic converter is in place.
- PNF, PPA and PND ECUs for 5 speed transmissions will not operate the reverse lock solenoid on 6 speed transmissions.
- The K-Pro ECU will not work on Automatic vehicles. Automatic ECUs cannot be converted to manual.
- Turn around time is usually 2 days from the time it is received.
Available for:
PRA - Euro Type R all models 02-05
PRB - US RSX 02-04 (05 model not supported)
PRC - Japanese DC5 Integra Type R
PRD - Japanese Civic Type R,
PNF - 2002 + Civic Si
PND -A0# - US RSX Base RSX 5 speed
PPA -A0# - 2002 + CRV 5 speed
ECU Must be shipped to Hondata for upgrade and ecu.
Notes
ECU must be sent to Hondata or authorized installer UNLESS unit comes with a new ECU
Hondata K-Series Engine Management Stand Alone from HorsepowerFreaks
hondata k-series engine management stand alone from horsepowerfreaks engine management stand alone. Install and installation help available for parts and accessories for these model years.
Zoom 
(10 of 10)