Innovate LM-2 Wideband Kits
Innovate Motorsports' original LM-1 has single handedly, changed the way people around the world tune their engines. The LM-1 has put Innovate Motorsports on the map as the leader in tuning software & hardware. Well as they say All Good Things Must Come to an End . The LM-1 is no longer in production.
The good news is the release of the all NEW LM-2. Everyone who currently owns an LM-1 will want to upgrade to an LM-2. It is physically smaller, has more features & is easier to use. Plus pricing is very similar to the old tried & true LM-1.
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2 s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
The LM-2 Features:
- Innovate Direct Digital Wideband Measurement Circuit
- Single or Dual Channel Version Available
- OBD-II Scan tool- read and clear trouble codes, and log OBD-II channels
- Log directly to SD card
- Playback log data on screen or with powerful analysis software LogWorks 3.0
- High-contrast graphics LCD
- Built-in RPM converter (inductive clamp or direct frequency)
- 4 fully-differential analog inputs
- 2 configurable analog outputs
- Positive lock connectors for all connections
- Innovate MTS serial in and out
- USB connection
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.
LM-2 Single Channel w/ OBDII Package:
The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included!
LM-2 Dual Channel w/ OBDII
The LM-2 Duo Kit (Dual Wideband O2) includes the LM-2 meter, (2) Bosch wide-band oxygen sensors, (2) 8 ft sensor cables, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, (2) weld-in bung and plug kits, LogWorks software CD, and quick-start guide. Carrying Case also included!
LM-2 "Basic" Kit
The new LM-2 "Basic" Kit (Single Wideband O2) ONLY includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide.
*Note: The LM-2 "Basic" Kit out of the box only includes accessories to display your Air/Fuel Ratio either on the meter and/or on your PC. To log RPM, or to Output the wideband signal to an external device you'll need the LM-2 Analog IN/OUT Cable optional accessory. For OBD-II features you'll need the LM-2 OBD-II Cable optional accessory. To record internally to your LM-2 you'll need the SD Card optional accessory.
|
| Universal Innovate Wideband Kits | | Universal | MSRP | Price | | |  "Basic" kit | $349.00 | $299.23 | |  | | |  Dual Channel w/ OBDII (Two O2 sensors included) | $669.00 | $573.60 | | | | |  Single Channel w/ OBDII | $479.00 | $410.69 | | | |
|
