Click to shop ecu tuning       
All Flywheels (2,481)SPEC All SPEC Parts

SPEC Aluminum Flywheels

SPEC flywheels are CNC manufactured at an unheard-of .001 tolerance, in an industry where the standard is .010.

This precision manufacturing process ensures perfect balance and a perfectly flat bedding surface for the clutch disc, both of which also contribute to the ultimate in safety for competitive environments. All SPEC flywheels carry SFI certification.

*Call to check fitment with clutch*

Please Select A Make Below

Acura SPEC Flywheels

Alfa Romeo SPEC Flywheels

Audi SPEC Flywheels

BMW SPEC Flywheels

Buick SPEC Flywheels

Chevrolet SPEC Flywheels

Chrysler SPEC Flywheels

Dodge SPEC Flywheels

Ford SPEC Flywheels

GMC SPEC Flywheels

Honda SPEC Flywheels

Hyundai SPEC Flywheels

Infiniti SPEC Flywheels

KIA SPEC Flywheels

Lexus SPEC Flywheels

Mazda SPEC Flywheels

Mercury SPEC Flywheels

Merkur SPEC Flywheels

Mini SPEC Flywheels

Mitsubishi SPEC Flywheels

Nissan SPEC Flywheels

Plymouth SPEC Flywheels

Pontiac SPEC Flywheels

Porsche SPEC Flywheels

Saab SPEC Flywheels

Saturn SPEC Flywheels

Subaru SPEC Flywheels

Toyota SPEC Flywheels

Volkswagen SPEC Flywheels
SPEC Aluminum Flywheel Reviews
  (8.9 of 10) 8 Reviews    Write Review
803/10/2013Conquestgood product just didn't know it didn't bring the dowel pins
1002/22/2013RedlineGreat product, noticed a bit more pep and increase in acceleration. Waiting for warmer weather to give it a good workout.
1012/13/2009Galantawesome!!! much more power when accelerating! but still smooth driving around town. i got the 6 bolt for the 4g63 and it drops 10lbs from the stock 18lb flywheel! great quality! highly recommend!!!
808/03/2009CorvetteReplaced stock dual mass flywheel. Introduced some additional trans noise at idle, in neutral, clutch out. Also, during gear shifts, engine rapidly losses rpm and on occasion with AC on will stall engine during shift. Overall, satisfied with product versus very high price for stock replacement flywheel
1005/19/2009FieroQuality is exactly what I would expect, fitment was smooth between the northstar and the 282 transmission. The fact that this product exists at all, is amazing to me, and the fact that it is such a high quality product for a VERY reasonable price (same as any aluminum flywheel).
1008/05/2008M5I couldn't be anymore happier when I started to use this product on my M5. Thanks Chris and Dave for helping me out!
707/13/2006Mustangthis flywheel was awesome. it was about 12lbs lighter than my stock flywheel, the only thing that was a downfall is that i had to re-drill the mounting holes because they where binding up with the mounting bolts. other than that it made a noticable difference in the spool up speed of the motor
804/11/2006240SXConsiderbly lighter, but I was expecting it to come as a solid billet assembly that could be resurfaced, the flywheel I received has a surface that must be replaced. Also, the holes for the dowl pins arround the outside edge were just a little off. I could only use some of them for installation. However I've had it for 3 months and am enjoying the driving experience. After putting on my exhaust (months before) the car lost some low end power which I feel was regained after this installation. This was installed with the SPEC Stage II Kevlar disc and pressure plate which I have used in other cars and enjoy. Thanks, Daniel in Dallas, TX

Have you seen these Flywheels?

Parts Available: