| Rating | Date | Model | Review |
|
| 6 | 11/13/2008 | Prelude | Product was nice but very hard to install in vehicle. Brackets were hundreths of an inch from being perfect which made getting the bolts in to the floor of the car very very difficult. taking installation time from maybe a hour to three almost. also made seats very difficult to move back an fourth since it was such a tight fitment. but brackets were very nice and included a convient bracket for the stock seat belt. |
|
| 6 | 11/13/2008 | Prelude | Product was nice but very hard to install in vehicle. Brackets were hundreths of an inch from being perfect which made getting the bolts in to the floor of the car very very difficult. taking installation time from maybe a hour to three almost. also made seats very difficult to move back an fourth since it was such a tight fitment. but brackets were very nice and included a convient bracket for the stock seat belt. |
|
| 9 | 06/06/2007 | Civic | Bolt holes aren't 100 percent but with enough jiggling they work. |
|
| 9 | 05/24/2007 | Elantra | The fitment on the car was awesome as well as on my momo seats. Finish was ok. All factory seat belt hardware fitted perfectly. As you cansee in my profile, my car is a '01model, be aware that 01-06 elantras have the exact same seat bases so it will fit all those years. |
|
| 9 | 05/24/2007 | Elantra | The fitment on the car was awesome as well as on my momo seats. Finish was ok. All factory seat belt hardware fitted perfectly. As you cansee in my profile, my car is a '01model, be aware that 01-06 elantras have the exact same seat bases so it will fit all those years. |
|
| 5 | 02/01/2007 | Del Sol | Ordered a Sparco seat bracket and got some other name brand. I had to make it fit, it was not perfect. Had to drill out holes also. |
|
| 9 | 04/26/2006 | Sentra | fitment was great, all holes matched up great |
|
| 9 | 04/26/2006 | Sentra | fitment was great, all holes matched up perfectly |
|
| 9 | 03/13/2006 | MR2 | Great fit. Of course nothing lines up perfectly but pretty damn close. This was the best fitting seat bracket I have ever bolted in. No need to modify it one bit to make it fit. |
|
| 7 | 06/21/2004 | 300ZX | Ultimately, I got the seat base to work, but wasn't 100% satisfied with the build quality. I suspect the jig used to build the unit(s) are not completely aligned. I also wasn't completely satisfied with the materials quality used, but ultimately this proved a moot point as I did get the base to fit my application and it is working fine. I give a rating of 7/10 for unsatisfactory fit-and-finish, but the part does what it says it is supposed to do, albeit with some minor modifications (bending, shaving, etc). |
| 10 Reviews |
