Click to shop ecu tuning       
All Big Brake Kits (66,848)StopTech All StopTech Parts
Big Brake Kits - PLEASE SELECT YOUR VEHICLE IN THE UPPER LEFT
Honda StopTech Drilled Touring Big Brake Kit Zoom StopTech

Honda StopTech Drilled Touring Big Brake Kit

  • Overview
  • Details
  • Images
StopTech Touring Big Brake Kits are the ultimate in 1-piece rotor brake upgrade systems and represent the best performance value in the StopTech lineup.

They offer nearly the same performance as the StopTech Big Brake Kits and Trophy full race systems at a more affordable price point. Designed for street driven production vehicles, StopTech Touring Kits include forged 2-piece calipers, larger 1-piece rotors, StopTech Stainless Steel Brake Lines, StopTech Street Performance Brake Pads and application-specific caliper brackets. The stiff 2-piece, fully-forged calipers have designated piston sizes specific to each application and provide a firmer, more responsive brake pedal that provides better brake pedal modulation. Depending on the application, Touring Big Brake Kits are available in two-, four- and six-piston configurations and 5 different caliper colors that use a special high temperature paint to withstand extreme conditions. All StopTech Touring Big Brake Kits include stiff calipers that utilize silicone dust boots to extend service intervals. The larger 1-piece rotors, available in Power Slot slotted, or StopTech SportStop drilled and drilled/slotted finishes, provide greater heat capacity and reduced brake fade. Also assisting in fade resistance and higher performance are the StopTech Street Performance Pads which have a high maximum operating temperature, and high bite for responsive brakes that can be driven hard.



Key Features
  • Nearly the same performance as the StopTech Big Brake Kits and Trophy full race systems at a more affordable price point
  • Available in many colors that will compliment your vehicle's exterior
  • Two, four and six-piston configurations
  • Made in the USA
StopTech Calipers
  • Fully forged and stiff for firmer brake pedal feel
  • Carefully engineered, 2-piece design reduces flex. The carbon steel caliper bolts running trough both halves multiply strength by 3-fold.
  • Patented, removable center bridge further resists yaw
  • Carefully selected piston sizes for precise torque output

Available in Red, Black, Silver, Blue, or Yellow.

Power Slot and SportStop 1 Piece Rotors
  • Direct replacement for factory brake rotor
  • Unique "short slot" and/or cross-drilling to aid heat and brake dust dispersal
  • Black e-coating for added protection from corrosion
  • Factory cooling vane design or directional vanes for improved cooling
  • Available with an optional Cryogenic treatment for added durability
Hard Anodized 6061-T6 Billet aluminum Mounting Brackets with Stainless Steel Studs

Application-specific hardware that is stronger than most competitors, with studs instead of the more commonly used bolts and hard anodized aluminum billet composition.

  • Hard anodized billet aluminum mounting brackets
  • Stainless steel studs secured with set screws for strength and durability
  • Fully machined aluminum or steel that is precise and strong
  • Application specific design for precise and proper fitment
  • All necessary hardware for easy installation
StopTech Stainless Steel Brake Lines

Braided stainless steel lines reduce system compliance and improve brake pedal feel and modulation. StopTech's Stainless Steel Brake Lines are D.O.T. compliant and designed to fit your vehicle.

  • Stainless steel braiding for lower compliance and extra protection
  • Provides quicker response
  • Firmer pedal feel
  • A variety of fittings for hundreds of applications
  • All necessary brackets and fasteners for easy installation
  • Better brake modulation
  • D.O.T. compliant
StopTech Street Performance Brake Pads

StopTech Street Performance Brake Pads are included in all Big Brake Kits besides the track-only Trophy Race Big Brake Kits. StopTech Street Performance Pads are intended for high performance street driving as well as light duty track use.

  • Aggressive pad for high performance street driving
  • Para-aramid composites provide linear response regardless of pad temperature
  • 100% positive molded for uniform friction material density
  • Low dust formulation is rotor friendly and leaves wheels cleaner
  • Scorched to raise initial cold effectiveness and ease bed-in
  • 100% Asbestos-free formulas
Required Pre-Purchase Fitment Check: Vehicle-specific wheel fitment templates for StopTech Big Brake Kits

To help identify whether your existing wheels will fit over a StopTech big brake kit, download the wheel fitment template for your vehicle and follow the instructions to verify clearance before you purchase. While wheel clearance is completely dependent on the diameter, offset and spoke design of your wheels, a general guideline is that StopTech kits usually require the following:

  • 328mm rotor (12.9") - minimum 17" wheel
  • 332mm rotor (13.1") - minimum 17" wheel
  • 355mm rotor (14") - minimum 18" wheel
  • 380mm rotor (15") - minimum 19" wheel
ST-22 Calipers


ST-40 Calipers


ST-41 Calipers


ST-60 Calipers


Included Components

Please find and print the template for your vehicle using THIS CHART to ensure proper clearance for this kit...



All Honda StopTech Drilled Touring Big Brake Kits
View All Honda Civic Big Brake Kits
Honda CivicPrice
(2002)
Vehicle:(2002) Honda Civic
Sub Model:SI
Engine:2.0L L4 GAS
Fuel Delivery:FI
Fuel Config:MFI
Engine Desig:K20A3
Specifics: Front
Incl. ST-41 Caliper
300x28mm Rotors
1 pc. Aero Rotors
Does Not Fit Stock Wheels
$1,534.50  Add to Cart
(2003)
Vehicle:(2003) Honda Civic
Sub Model:SI
Engine:2.0L L4 GAS
Fuel Delivery:FI
Fuel Config:MFI
Engine Desig:K20A3
Specifics: Front
Incl. ST-41 Caliper
300x28mm Rotors
1 pc. Aero Rotors
Does Not Fit Stock Wheels
$1,534.50  Add to Cart
(2004)
Vehicle:(2004) Honda Civic
Sub Model:SI
Engine:2.0L L4 GAS
Fuel Delivery:FI
Fuel Config:MFI
Engine Desig:K20A3
Specifics: Front
Incl. ST-41 Caliper
300x28mm Rotors
1 pc. Aero Rotors
Does Not Fit Stock Wheels
$1,534.50  Add to Cart
(2005)
Vehicle:(2005) Honda Civic
Sub Model:SI
Engine:2.0L L4 GAS
Fuel Delivery:FI
Fuel Config:MFI
Engine Desig:K20A3
Specifics: Front
Incl. ST-41 Caliper
300x28mm Rotors
1 pc. Aero Rotors
Does Not Fit Stock Wheels
$1,534.50  Add to Cart
(2006)
Vehicle:(2006) Honda Civic
Sub Model:SI
Engine:2.0L L4 GAS
Fuel Delivery:FI
Fuel Config:MFI
Engine Desig:K20Z3
Specifics: Front
Incl. ST-41 Caliper
300x28mm Rotors
1 pc. Aero Rotors
Does Not Fit Stock Wheels
$1,534.50  Add to Cart
(2007)
Vehicle:(2007) Honda Civic
Sub Model:SI
Engine:2.0L L4 GAS
Fuel Delivery:FI
Fuel Config:MFI
Engine Desig:K20Z3
Specifics: Front
Incl. ST-41 Caliper
300x28mm Rotors
1 pc. Aero Rotors
Does Not Fit Stock Wheels
$1,534.50  Add to Cart
(2008)
Vehicle:(2008) Honda Civic
Sub Model:SI
Engine:2.0L L4 GAS
Fuel Delivery:FI
Fuel Config:MFI
Engine Desig:K20Z3
Specifics: Front
Incl. ST-41 Caliper
300x28mm Rotors
1 pc. Aero Rotors
Does Not Fit Stock Wheels
$1,534.50  Add to Cart
(2009)
Vehicle:(2009) Honda Civic
Sub Model:SI
Engine:2.0L L4 GAS
Fuel Delivery:FI
Fuel Config:MFI
Engine Desig:K20Z3
Specifics: Front
Incl. ST-41 Caliper
300x28mm Rotors
1 pc. Aero Rotors
Does Not Fit Stock Wheels
$1,534.50  Add to Cart
 
This product also fits other vehicles.

All StopTech Drilled Touring Big Brake Kits
 
 
StopTech Drilled Touring Big Brake Kit Reviews

This product has not yet been rated.  Write Review
 

Have you seen these Big Brake Kits?

Parts Available: 82.432.5100.52, 82.432.5100.22, 82.432.5100.72, 82.432.5100.62, 82.432.5100.82, 82.432.5100.52, 82.432.5100.22, 82.432.5100.72, 82.432.5100.62, 82.432.5100.82, 82.432.5100.52, 82.432.5100.22, 82.432.5100.72, 82.432.5100.62, 82.432.5100.82, 82.432.5100.52, 82.432.5100.22, 82.432.5100.72, 82.432.5100.62, 82.432.5100.82, 82.432.5100.52, 82.432.5100.22, 82.432.5100.72, 82.432.5100.62, 82.432.5100.82, 82.434.5100.52, 82.434.5100.22, 82.434.5100.72, 82.434.5100.62, 82.434.5100.82, 82.434.5100.52, 82.434.5100.22, 82.434.5100.72, 82.434.5100.62, 82.434.5100.82, 82.434.5100.52, 82.434.5100.22, 82.434.5100.72, 82.434.5100.62, 82.434.5100.82