|
|
| Back
You searched for Acura Integra Headers
We found 59 item(s) matching your search
|
|
For the ultimate gain in performance and smooth operation. Carries out the stresses of the exhaust airflow through the valves. Carefully crafted to fit each engine room. This competition exhaust manifold developed from 5ZIGEN's data acquired from competition racing and continued testing.
Utilizat... (more)
5zigen Headers - Full Details
|
|
| (94-01) Acura Integra Type R (JDM Only) Special Order |
$550.00 | $458.32 |  | BHOEX04-P |
|
|
The DC Sports headers are the benchmark by which all other headers are judged. Each one has been designed and tested on a Dynamic Test Systems engine dyno enabling the engineers to optimize their performance. Magazine and race track test proves again and again that these are the best built and best ... (more)
DC Sports Ceramic Headers - Full Details
|
|
| (90-91) Acura Integra All (4-2-1 Two-Piece Header) |
$450.99 | $366.92 | | AHC6003 |
| (94-99) Acura Integra GS-R (4-1 One-Piece Header) |
$437.07 | $355.59 | | AHC6607 |
| (00-01) Acura Integra GS-R (4-1 One-Piece Header) |
$437.07 | $355.59 | | AHC6611 |
| (00-01) Acura Integra GS-R (4-2-1 One-Piece Header) |
$432.95 | $352.24 | | AHC6511 |
| (94-99) Acura Integra GS-R (4-2-1 One-Piece Header) |
$432.95 | $352.24 | | AHC6507 |
| (94-99) Acura Integra GS-R (4-2-1 Two-Piece Header) |
$450.99 | $366.92 | | AHC6007 |
| (94-01) Acura Integra GS/LS/RS (4-1 One-Piece Header) |
$432.95 | $352.24 | | AHC6606 |
| (94-01) Acura Integra GS/RS/LS (4-2-1 Two-Piece Header) |
$450.99 | $366.92 | | AHC6006 |
| (92-93) Acura Integra GS/RS/LS/GS-R (4-2-1 Two-Piece Header) |
$450.99 | $366.92 | | AHC6005 |
| (97-01) Acura Integra Type R (4-1 One-Piece Header) |
$445.32 | $362.31 | | AHC6604 |
|
|
DC Sports Race Headers for the Integra
Countless hours of research and development went into the creation of this header. The change in the design of the factory exhaust system presented a new set of challenges for DC Sports engineers. With the stock catalytic converter welded to the secondary, the R&D Department had to find a way to cre... (more)
DC Sports Race Headers - Full Details
- Integra Race Headers for JDM Style Only. All race headers are for off road use only. No CARB E.O #.
- Note: Race Headers remove catalytic converter. Removal of Catalytic converter will cause check engine light to remain on.
|
|
| (96-97) Acura Integra JDM Type R (4-1 One Piece) - Brushed Finish |
$686.13 | $558.23 | | AHS6612B |
| (96-97) Acura Integra JDM Type R (4-1 One Piece) - Polished Finish |
$831.88 | $676.81 | | AHS6612S |
| (96-97) Acura Integra JDM Type-R (4-1 One-Piece Header) Ceramic |
$463.03 | $376.73 | | AHC6612 |
| (94-01) Acura Integra K20A2 Swap - 4-2-1, One Piece |
$521.13 | $423.99 | | AHR6516 (INT) |
| (94-01) Acura Integra RS/LS/GS/GSR/Type R, K-Series Swap Header, (4-2-1) One Piece |
$521.13 | $423.99 | | AHR6516 |
|
|
DC Sports Stainless Steel Headers for the Integra
The stainless steel header has all the same design feature as the mild steel ceramic coated header except we use polished T-304 stainless steel. These stainless steel headers is designed to stand up to the harshest conditions you can subject it to and provide you with the most power from any street... (more)
DC Sports Stainless Steel Headers - Full Details
|
|
| (00-01) Acura Integra GS-R (4-1 One Piece) - Brushed Finish |
$651.42 | $529.99 | | AHS6611B |
| (94-99) Acura Integra GS-R (4-2-1 One Piece) - Brushed Finish |
$673.75 | $548.16 | | AHS6507B |
| (94-99) Acura Integra GS-R (4-2-1 One Piece) - Polished Finish |
$808.50 | $657.80 | | AHS6507S |
| (94-01) Acura Integra GS/RS/LS (4-1 One Piece) - Brushed Finish |
$545.88 | $444.12 | | AHS6606B |
| (94-01) Acura Integra GS/RS/LS (4-1 One Piece) - Polished Finish |
$756.25 | $615.29 | | AHS6606S |
|
|
This header is made from stainless steel mandrel bent pipes. Main power improvements are made by the design and placement of the collectors to even out the exhaust pulses. Large primary runners make it a solid choice for vehicles that will have higher horsepower modifications.
These are special o... (more)
Greddy Headers - Full Details
|
|
| (94-99) Acura Integra GSR (4-2-1) 1pc |
$389.00 | $369.55 | | 10551014 |
| (94-99) Acura Integra LS/RS (4-2-1) 1pc |
$389.00 | $369.55 | | 10551011 |
| (90-91) Acura Integra LS/RS (4-2-1) 2pc |
$439.00 | $417.05 | | 10551012 |
| (92-93) Acura Integra LS/RS (4-2-1) 2pc |
$429.00 | $407.55 | | 10551013 |
|
)
|
Finally a header designed specifically for your Honda swap. The B16 swap header bolts directly to your stock exhaust and relocates the two O2 sensors to the proper position for your 88-91 Civic/CRX. The K20 swap header fits both the K20 and K24 block allowing proper clearance for the EG/EK Civics an... (more)
Hasport Custom Swap Headers - Full Details
|
|
| (94-01) Acura Integra Exhaust Header for K-Series Motor |
| $570.46 | | EGKH20 (int) |
|
|
Because of its low emissivity and insulating effect, JET-HOT Sterling creates a thermal barrier to protect headers - inside and out - while reducing heat transfer into the engine compartment. But the good news goes beyond protecting headers from thermal fatigue. Plugs, wires, fan motors, water pumps... (more)
Hedman Jet Hot Coated Headers - Full Details
- (Year) Engine - Primary & Collector
|
|
| (90-91) Acura Integra 1.8L - 1 1/2", 2" |
| $325.91 | | 36010 (Int) |
| (90-91) Acura Integra 1.8L - 13/8-15/8", 2" |
| $397.34 | | 36014 (Int) |
| (92-93) Acura Integra GS/GSR 1.8L - 1"3/8-15/8", 2" |
| $397.34 | | 36024 (Int) |
| (92-93) Acura Integra GS/GSR 1.8L - 11/2", 2" |
| $325.91 | | 36020 (Int) |
| (94-95) Acura Integra GSR Only 1.8L - 11/2", 2" |
| $325.91 | | 36030 (Int) |
| (94-95) Acura Integra GSR Only 1.8L - 13/8"-15/8" , 2" |
| $388.28 | | 36034 (Int) |
|
|
Megan racing headers are made with T-304 stainless steel, Mandrel bent tubing, CNC Machined Flanges. Each set is tested and dynoed to make sure the fitment and performance meet our goal. Each header comes with 1 year warranty.
Megan Racing Headers - Full Details
|
|
| (90-91) Acura Integra (4-2-1) |
$170.00 | $141.70 | | MR-SSH-AI90 |
| (94-01) Acura Integra GSR 1 pcs |
$210.00 | $175.04 | | MR-SSH-AI94G |
| (94-01) Acura Integra LS/RS, Type r (4-2-1) |
$170.00 | $141.70 | | MR-SSH-AI94L |
| (92-93) Acura Integra LS/RS/GS (4-2-1) |
$170.00 | $141.70 | | MR-SSH-AI92 |
|
|
Manufactured using mandrel-bent, mild steel tubing and surface-ground, thick steel flanges. All PaceSetter Headers come with hardware, gaskets and illustrated instructions and are backed by a three-year warranty. Header bolts not included.
Please
Pacesetter Headers - Full Details
- Not legal for use on catalyst-equipped vehicles except for racing vehicles which may not be operated on a highway. Pre-catalyst vehicles must use original emission control devices. It is the responsibility of the customer to reinstall these devices on the vehicle.
|
|
| (86-87) Acura Integra 1.6L |
$289.95 | $200.91 | | 70-1260 |
| (88-89) Acura Integra 1.6L |
$244.95 | $169.73 | | 70-1261 |
| (90-91) Acura Integra 1.8L |
$244.95 | $169.73 | | 70-1262 |
| (92-93) Acura Integra 1.8L Non Vtec |
$244.95 | $169.73 | | 70-1263 |
| (94-97) Acura Integra 1.8L Non Vtec |
$244.95 | $169.73 | | 70-1265 |
| (94-00) Acura Integra GSR 1.8L V tec |
$244.95 | $169.73 | | 70-1266 |
|
|
Pacesetter ARMOR coat Headers for the Integra
Manufactured using mandrel-bent, mild steel tubing and surface-ground, thick steel flanges, PaceSetter Headers are available with standard black painted finish or Armor*Coat, a polished, 2000 Degree F, metallic-ceramic coating. Each header undergoes an extensive preparation phase followed by two app... (more)
Pacesetter ARMOR coat Headers - Full Details
- ARMOR COAT REQUIRES 2-3 WEEKS LEAD TIME TO SHIP.
- Not legal for use on catalyst-equipped vehicles except for racing vehicles which may not be operated on a highway. Pre-catalyst vehicles must use original emission control devices. It is the responsibility of the customer to reinstall these devices on the vehicle.
|
|
| (86-87) Acura Integra 1.6L |
$457.95 | $317.31 | | 72C1260 |
| (88-89) Acura Integra 1.6L |
$412.95 | $286.13 | | 72C1261 |
| (90-91) Acura Integra 1.6L |
$412.95 | $286.13 | | 72C1262 |
| (92-93) Acura Integra 1.8L non Vtec |
$412.95 | $286.13 | | 72C1263 |
| (94-97) Acura Integra 1.8L non Vtec |
$412.95 | $286.13 | | 72C1265 |
| (94-00) Acura Integra GSR 1.8L Vtec |
$412.95 | $286.13 | | 72C1266 |
|
|
Stainless Steel Headers
*T304 Stainless Steel construction
*Custom fit applications
*Mandrel bent tubing
*3/8" thick CNC flange
*OEM direct bolt on with no cutting or welding
PIT Stainless Steel Headers - Full Details
|
|
| (94 and up) Acura Integra GSR (Clearance) |
| $204.46 | | 4602S |
| (94 and up) Acura Integra LS, GS, RS |
| $310.59 | | 4603S |
|
|
Weapon-R 4-2-1 Race Headers Features:
Long Tube Design Maximum High RPM Exhaust Flow.
Stepped Tubing Design for Higher Torque Gains.
Ideal for all forms of Competition Racing.
Best for Vehicles with High Lift Cams and High RPM Rev Band.
2.5" Collector for High Exhaust Flow.
Eliminates Catalyti... (more)
Weapon-R Race Headers - Full Details
- Offroad use only. Not legal for use on public roadways.
- Weapon-R Check Engine Light Eliminator is reccommended for use with these race headers.
|
|
| Acura Integra B Series - 4-2-1 / 3PC |
| $495.00 | | 953-111-115 |
| Acura Integra B Series - 4-2-1 / 3PC |
| $495.00 | | 953-111-115 |
|
|
Weapon-R Stainless Steel Street Headers for the Integra
Weapon-R Stainless Steel Headers are constructed of stainless steel. Polished to a show quality finish, these headers are second to none when it comes to racing headers.
The exhaust flanges are CNC machined and then welded inside and out to prevent cracking. CNC Mandrel-bent tubes are computer w... (more)
Weapon-R Stainless Steel Street Headers - Full Details
- All mounting hardware is included.
|
|
| (00-01) Acura Integra GSR - 4-1 / 1 Piece |
| $200.00 | | 953-111-110 |
| (94-99) Acura Integra GSR - 4-1 / 1 Piece |
| $200.00 | | 953-111-106 |
| (94-99) Acura Integra LS - 4-1 / 1 Piece |
| $200.00 | | 953-111-107 |
|
|
Yonaka Motorsports headers for all B-Series motors featuring 1 5/8" pipes with 2.5" collector flange.
This is an aftermarket header, designed for the JDM 1998+ Integra Type R B18C engine.
It has all the fitments for the OEM upper and lower headshields. This header is identical to the JDM Hond... (more)
Yonaka Motorsports Headers - Full Details
|
|
| Acura Integra 4-1 Type R Stainless Steel- Type 2 |
$499.00 | $331.73 | | YMEH003 |
| Acura Integra 4-1 Type-R Mild Steel (Black) |
$399.00 | $231.71 | | YMEH001 |
| Acura Integra 4-1 Type-R Stainless Steel |
$499.00 | $331.73 | | YMEH002 |
| |
| |
|
|
|
|
|
Shopping Cart (0 items - $0.00)