Mazda Parts | Mazda FD RX7 Clutch KitsWe found 86 Clutch Kits for the Mazda FD RX7 |
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
pictures may vary
by application |
The BLITZ Active Clutch was designed to hold maximum horsepower while retaining daily drivability. The Active Clutch is a complete clutch assembly that includes flywheel, pressure plate, clutch disc, and all necessary hardware. Our clutch systems weighs an average of 15%-20% lighter then stock. The unique feature of the BLITZ Active Clutch is the ability of change the clutch from a single disc clutch to a twin disc clutch. This allows the user to choose the correct clutch according to the power ...
Click for complete description
| (93-95) Mazda FD RX7 FD3S 13B-REW, Twin |
$2,310.00 | $2,194.50 |  | 65291 |
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
The FX500 System uses the Power Plus II Pressure Plate with the Sintered Iron disc or Rigid four puck disc. It is designed for maximum holding capacity with no compromises. Using a Sintered Iron friction material, the FX500 holds all the power and rapidly dissepates unwanted heat.
Warning: The FX500 is a Solid Hub disc that engages and disengages instantly and may chatter upon starting from a stop. This is a Race Only Clutch.
All Clutch Masters systems come complete with:
- Pressure Pl...
Click for complete description
 (9.5 of 10) 2 Reviews
| (93-95) Mazda FD RX7 1.3L Turbo R cyl. - Footnotes: C,D |
| $582.27 | | 10-047-HDB4 |
|
|
|
|
|
| |
|
pictures may vary
by application |
The economical solution for moderately modified cars or simply aggressive individuals with stock power. Offers ane estimated 40-50% of torque capacity and maintains stock pedal feel. 300 mile break-in recommended with this set-up.
Includes:
Performance pressure plate
6 pad Carbotic high-torque performance disc assembly
All applicable bearings
The appropriate alignment tool.
- DO NOT use with added forced induction such as turbo, supercharger, or NOS systems.
- Some kits may not be supplied with all pieces. Please verify with one of our sales rep before ordering
| (93-95) Mazda FD RX7 1.3L Turbo |
| $450.00 | | 10047-2400 |
|
|
|
|
|
|
pictures may vary
by application |
This segmented Kevlar material with a performance pressure plate will provide the ultimate in street and strip combination. This assembly is suited for 150% increase in torque capacity. Provides quick but smooth engagement and extended life.
Includes:
Performance pressure plate
High torque sprung disc with segmented Kevlar facings
All applicable bearings
The appropriate alignment tool.
- 500 mile break-in REQUIRED with this set-up
- Some kits may not be supplied with all pieces. Please verify with one of our sales rep before ordering
| (93-95) Mazda FD RX7 1.3L Turbo |
| $795.00 | | 10047-2300 |
|
|
|
pictures may vary
by application |
This assembly, available with a double spring, six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides 250% increase in torque capacity.
Includes:
Performance pressure plate
6 puck high torque sprung disc with Ceramic buttons
All applicable bearings
The appropriate alignment tool.
- 300 mile break-in recommended with this set-up
- Some kits may not be supplied with all pieces. Please verify with one of our sales rep before ordering
| (93-95) Mazda FD RX7 1.3L Turbo |
| $695.00 | | 10047-1620 |
|
|
|
pictures may vary
by application |
This assembly, available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides 250% increase in torque capacity.
Includes:
Performance pressure plate
6 puck high torque disc with Ceramic buttons
All applicable bearings
The appropriate alignment tool.
- 300 mile break-in recommended with this set-up.
- Some kits may not be supplied with all pieces. Please verify with one of our sales rep before ordering
| (93-95) Mazda FD RX7 1.3L Turbo |
| $695.00 | | 10047-0620 |
|
|
|
pictures may vary
by application |
This assembly, available with a double spring, six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides 300% increase in torque capacity.
Includes:
Performance pressure plate
4 puck high torque sprung disc with Ceramic buttons
All applicable bearings
The appropriate alignment tool.
- 300 mile break-in recommended with this set-up.
- Some kits may not be supplied with all pieces. Please verify with one of our sales rep before ordering
| (93-95) Mazda FD RX7 1.3L Turbo |
| $695.00 | | 10047-1420 |
|
|
|
pictures may vary
by application |
This assembly, available with a rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides 300% increase in torque capacity.
Includes:
Performance pressure plate
4 puck high torque disc with Ceramic buttons
All applicable bearings
The appropriate alignment tool.
- 300 mile break-in recommended with this set-up.
- Some kits may not be supplied with all pieces. Please verify with one of our sales rep before ordering
| (93-95) Mazda FD RX7 1.3L Turbo |
| $695.00 | | 10047-0420 |
|
|
| |
|
|
|
|
|
|
| |
|
pictures may vary
by application |
Introducing the new generation of clutch systems by Exedy, D-Core the revolutionary Carbon clutch system, developed to achieve the ultimate goal of comfort and ease of operation the D-Core is purpose built to absorb the noise and vibration emanation from Drivetrain components such as the differential gear, transmission and engine. the D-Core system is designed to protect the Drivetrain by absorbing and dissipating "shock torque" and is especially effective in vehicles fitted with 6speed transmis...
Click for complete description
| (93-95) Mazda FD RX7 13B-REW 1.3L- 475 ft/lbs |
| $3,229.99 | | ZM022SDMC1 |
|
|
|
|
|
|
pictures may vary
by application |
Exedy developed the best carbon structure with high burst strength and torque transferring capabilities as a performance clutch. With the carbon, we tuned for Friction Coefficient to get smooth operating @ Cold Condition like street, and High Torque transfer @ hot condition such as Race Circuit. Our Hyper Carbon Clutch has superb easy operation, best inertia and extremely high torque capacity in this class of product.
Long Life Design:
Exedy Semi Carbon possesses a life span greater than 2...
Click for complete description
- stage 3 and up do not come with throw-out bearings
| (93-95) Mazda FD RX7 13B-REW 1.3L- 630 ft/lbs |
| $3,786.88 | | ZM023SBMC |
|
|
|
|
|
|
|
|
|
pictures may vary
by application |
Stage 2 Racing: Sprung Center - Track Use
EXEDY cerametallic clutches are desinged to handle the abuse of higher power modified engines. EXEDY's cerametallic friction material can handle much more slippage than stock type disc assemblies without slipping and fading.
All EXEDY cerametallic clutch discs have sprung center dampers to reduce the impact and shock loads put into the drivetrain. This protects the transmission and the rest of the drive line system.
The reduced thickness (thi...
Click for complete description
| (93-95) Mazda FD RX7 13B-REW 1.3L- 282 ft/lbs (When using ZF01 Flywheel, use Mazda PN N351-11-521) |
$781.20 | $541.19 | | 10900 |
|
|
|
|
|
|
|
|
|
pictures may vary
by application |
For high-powered applications EXEDY offers Multi plate clutches. These are designed for hot street action as well as drag, road, and rally racing. All of Exedy's multi plate clutches come with a lightweight chromoly steel flywheel, and the famous purple anodized forged aluminum clutch cover. Depending on the application, both strap drive and lug drive models are available. All have T5001 cerametallic friction materials for extreme heat resistance. The multi-plate clutches are rated up to 800+ fo...
Click for complete description
- Stage 5 = Unsprung unless otherwise noted.
- D-Core = Sprung Hub
- Stage 3 and up do not come with throw-out bearings.
| (93-95) Mazda FD RX7 13B-REW 1.3L- 670 ft/lbs (Requires PN N351-11-521) |
$2,801.40 | $2,042.56 | | ZM023SR |
|
|
| |
|
pictures may vary
by application |
The HKS multi-plate performance clutch kits are vehicle specific Push-Type racing clutch applications designed for street-car use.
| (93-95) Mazda FD RX7 |
$1,870.00 | $1,645.60 | | 2604-SZ001 |
|
|
|
|
|
| |
|
|
|
|
pictures may vary
by application |
OS Giken's R series are revised versions of the TS2AS and TS2BD. They are specifically designed for large single turbo charged engines found in many of today's racing cars.
The R Type twin disk will come 215mm w/center hub and damper unless noted otherwise.
Please
- Some clutch kits may require additional parts, please call sales rep for details.
- Mazda Rotaries will require an OEM Counterweight for proper installation.
| Mazda FD RX7 Fd3s, 13Bt |
$1,990.00 | $1,890.50 | | MZ121-BH6 |
|
|
|
pictures may vary
by application |
OS Giken's STR Series racing clutch was designed to bring back the everyday driving pleasure in your high performance vehicle. This brand new twin plate clutch design uses stronger heat tempered materials and enhances internal cooling, further providing you with the race ready performance and quality as expected from OS Giken. While ready for any impromptu day out at the race circuit, the STR racing clutch unique design makes it ideal for your daily driver. With a clutch pedal lighter than even ...
Click for complete description
- Please Note: Some clutch kits may require additional parts, please call sales rep for details.
- Mazda Rotaries will require an OEM Counterweight for proper installation.
| Mazda FD RX7 Fd3s, 13bt, move alt. kit included, Unsprung disk |
$2,290.00 | $2,175.50 | | MZ121-BJ5 |
|
|
|
pictures may vary
by application |
Through research and development of high performance engines, OS Giken realized the need for the production of higher quality, more durable clutch systems to meet the rigorous demands of race and sport driving. The OS multi-plate clutch is able to transmit engine revolutions and output to the drive train without loss. They are made of the highest quality materials and their durability is second to none. OS Giken's continual research and development has brought about many improvements since there...
Click for complete description
(10 of 10) 1 Review
- Some clutch kits may require additional parts, please call sales rep for details.
- Mazda Rotaries will require an OEM Counterweight for proper installation.
| Mazda FD RX7 13BT, Aluminum Cover, 225m |
$1,690.00 | $1,605.50 | | MZ121-AB8 |
| Mazda FD RX7 13BT, Pressed Steel Cover, 225m |
$1,690.00 | $1,605.50 | | MZ121-AB8 |
|
|
|
pictures may vary
by application |
The TS series is one of OS Giken's newest Racing Clutch's. It's friction plates are made from heat treated metal, which is carefully selected and alloyed so that the plates match with the materials of the flywheel and center plate to improve durability and maximize performance.
TS Series twin disk clutches come with a pressed steel cover. All clutches will come un-sprung unless noted otherwise.
Please
 (8 of 10) 1 Review
- Some clutch kits may require additional parts, please call sales rep for details.
- Mazda Rotaries will require an OEM Counterweight for proper installation.
| Mazda FD RX7 Fd3s, 13BT, 204mm |
$1,790.00 | $1,700.50 | | MZ121-BC3 |
| Mazda FD RX7 Fd3s, 13BT, 215mm |
$1,890.00 | $1,795.50 | | MZ121-BC5 |
| Mazda FD RX7 Fd3s, 13BT, 215mm w/Heavier Flywheel |
$1,890.00 | $1,795.50 | | MZ121-BD5 |
|
|
| |
|
pictures may vary
by application |
* Complete bolt-on system consist of disk, clutch cover and flywheel.
* Dynamically balanced. 400PS/3100lbs class rated.
* Excellent cost performance for race applications.
1.Strengthened Disc & Cover
PWR Racing Single Clutch has high pushing pressure, but pedal pressure is light same as original. We realized lightweight and low inertia(25% down compared to original) by using high friction and durability material for clutch disc, miniaturizing metallic pad. Furthermore, quick ...
Click for complete description
| (93-95) Mazda FD RX7 FD3S |
| $1,198.00 | | 1750-CZ211-RS |
|
|
|
pictures may vary
by application |
PWR STREET SINGLE CLUTCH
* Excellent cost performance for the street application.
* Designed for hard driving with stock or lightly upgraded engines.
* Super heavy-duty clutch. Superb longevity.
* Dynamically balanced.
* Complete bolt-on system come with disk & clutch cover.
1.Strengthened Disc & Cover
We realized about 35% increase of pushing pressure by strengthened diaphragm. Disc was designed especially to prevent judder for street users, and it is possible that durable PWR S...
Click for complete description
| (93-95) Mazda FD RX7 FD3S |
| $998.00 | | 17-CZ215-S |
|
|
| |
|
|
|
|
pictures may vary
by application |
Ralco RZ Stage 2 clutch kit is a step up from their Stage 1 clutch kit. This is a versatile set up for the street and on the track.
It provides a smooth engagement yet it can hold more power over stock clutches. The clutch kit includes only the highest grade components from the world's leading high performance clutch manufacturer.
The Carbonized kevlar friction material is used on all Stage 2 clutch kits to have higher burst strength and heat tolerance. The Heavy-duty pressure plate is h...
Click for complete description
| (93-99) Mazda FD RX7 Turbo, 13BT |
| $487.41 | | RF1-53025R1Z |
|
|
| |
|
pictures may vary
by application |
Ideal for bolt on performance upgrades (BPU) such as air intake, exhaust system, ignition system, fuel system and adjustable cam gears. Available with Street disc, 6-Puck Solid and 6-Puck Sprung Hub discs. Use 6-Puck discs for racing.
- The 300zx kit includes all nessecary tools.
- Available CYN-R-G Segmented Billet Flywheel.
| (93-95) Mazda FD RX7 Torque Capacity 350 / Pressure Increase 16% |
$579.89 | $492.90 | | SS-15601-SH |
|
|
| |
|
pictures may vary
by application |
The South Bend Con FE Dyna Max kit features a full feramic lining and an organic lining on a marcelled fin. South Bend Modified the pressure plate for higher plate load and smoothness of engagement.
Most Applications Include Pilot/Throw Out Bearings.
| (93-95) Mazda FD RX7 1.3 Feramic |
| $800.16 | | K745FE |
|
|
| |
|
pictures may vary
by application  zoom
|
SPEC offers their Multi-disc clutch and flywheel assemblies for limited street, drag race and road race applications.
The Mini Twin assemblies are available in different clutch disc and flywheel materials, clamp loads, disc configurations and diameters. Each one with a specific recommendation based on the type of usage the vehicle demands.
These units are rebuild-able by SPEC or the end user and replacement components or rebuild services are always available. SPEC manufactures to an indu...
Click for complete description
- All SPEC Mini Twin *D-Trim* clutch kits come with flywheel and are rated up to 800 ft/lbs of torque, unless otherwise noted.
- Usage Key: S = Street, L = Limited Street, D = Drag, DR = Drift, RR = Road Racing/Time Attack, P = Pulling, R = Ralley
| (92-02) Mazda FD RX7 13B REW - LS,D |
$1,599.00 | $1,439.10 | | SZ47MT2 |
|
|
|
pictures may vary
by application zoom
|
SPEC offers their Multi-disc clutch and flywheel assemblies for limited street, drag race and road race applications.
The Mini Twin assemblies are available in different clutch disc and flywheel materials, clamp loads, disc configurations and diameters. Each one with a specific recommendation based on the type of usage the vehicle demands.
These units are rebuild-able by SPEC or the end user and replacement components or rebuild services are always available. SPEC manufactures to an indu...
Click for complete description
- Usage Key: S = Street, L = Limited Street, D = Drag, DR = Drift, RR = Road Racing/Time Attack, P = Pulling, R = Ralley
| (92-02) Mazda FD RX7 13B REW (Holds up to 1000ft/lbs) - S,RR,D,R |
$1,999.00 | $1,799.10 | | SZ47MTH |
|
|
|
|
|
|
|
|
|
pictures may vary
by application |
Types of Driving: Street, Drag, Road Race, Ralley, Pulling, Autocross
For all modified engines making more torque than the stage 2 can support. Maintains stage 2 feel for good daily drivability and offers very good wear characteristics, but provides a higher torque capacity. High clamp pressure plate, composite multi-friction carbon-kevlar material, high torque sprung hub and disc assembly, tool kit and some include throw out bearing.
*
(8.4 of 10) 7 Reviews
- Cars with dual mass flywheel will come with unsprung disc.
- Most kits come with pilot bearing, throwout bearing and allignment tool.
| (93-95) Mazda FD RX7 1.3L 495FT LBS - Twin Turbo |
$599.00 | $539.10 | | SZ473H |
|
|
|
pictures may vary
by application |
Types of Driving: Street, Drag, Drift, Road Race, Rally, Pulling, Autocross
For heavily modified street and race engines. Offers sufficient daily drivability with a comfortable pedal feel and quick engagement. Offers good wear characteristics under low and high stress usage.
High clamp pressure plate, 4 or 6 puck carbon semi-metallic friction with high torque sprung hub and disc assembly, tool kit and some include throw out bearing. 6 puck is standard on most applications, but 4 puck can b...
Click for complete description
 (8.9 of 10) 33 Reviews
- Most kits come with pilot bearing, throwout bearing and allignment tool.
- Cars with dual mass flywheel will come with unsprung disc.
| (93-95) Mazda FD RX7 1.3L Twin Turbo 518 FT LBS |
$535.00 | $481.50 | | SZ473 |
|
|
|
pictures may vary
by application |
Types of Driving: Street, Drag, Drift, Road Race, Pulling
For heavily modified street and race engines making more torque than the st3 can support. Offers good daily drivability and better manageability than the stage 3, with even better wear characteristics.
High clamp pressure plate, full-faced carbon metallic friction, high torque sprung hub and disc assembly, tool kit, some include throw out bearing.
*
(8.6 of 10) 5 Reviews
- Most kits come with pilot bearing, throwout bearing and allignment tool.
- Cars with dual mass flywheel will come with unsprung disc.
| (93-95) Mazda FD RX7 1.3L 598FT LBS - Twin Turbo |
$669.00 | $608.79 | | SZ473F |
|
|
|
pictures may vary
by application |
Types of Driving: Drag, Drift, Road Race, Rallye, Pulling, Circle Track
High clamp pressure plate, 3,4 or 6 puck carbon semi-metallic friction with high torque rigid hub and carrier assembly, tool kit and some include throw out bearing.
*
- Cars with dual mass flywheel will come with unsprung disc.
- Most kits come with pilot bearing, throwout bearing and allignment tool.
| (93-95) Mazda FD RX7 1.3L Twin Turbo 528 FT LBS |
$539.00 | $505.31 | | SZ474-3 |
|
|
|
pictures may vary
by application |
For heavily modified import engines or engines of any modification level being used in the above driving environments, where an instantaneous engagement and light weight are beneficial. Not street-friendly due to harsh engagement.
High clamp pressure plate, 4 puck carbon semi-metallic friction with high torque rigid hub and carrier assembly, tool kit and some include throw out bearing.
*
- Cars with dual mass flywheel will come with unsprung disc.
- Most kits come with pilot bearing, throwout bearing and allignment tool.
| (93-95) Mazda FD RX7 1.3L Twin Turbo 528 FT LBS |
$539.00 | $505.31 | | SZ474-4 |
|
|
|
pictures may vary
by application |
For heavily modified import engines or engines of any modification level being used in the above driving environments, where an instantaneous engagement and light weight are beneficial. Not street-friendly due to harsh engagement.
High clamp pressure plate, 6 puck carbon semi-metallic friction with high torque rigid hub and carrier assembly, tool kit and some include throw out bearing.
*
- Most kits come with pilot bearing, throwout bearing and allignment tool.
- Cars with dual mass flywheel will come with unsprung disc.
| (93-95) Mazda FD RX7 1.3L Twin Turbo 528 FT LBS |
$539.00 | $505.31 | | SZ474-6 |
|
|
|
|
|
|
pictures may vary
by application zoom
|
SPEC offers their Multi-disc clutch and flywheel assemblies for limited street, drag race and road race applications.
The Mini Twin assemblies are available in different clutch disc and flywheel materials, clamp loads, disc configurations and diameters. Each one with a specific recommendation based on the type of usage the vehicle demands.
These units are rebuild-able by SPEC or the end user and replacement components or rebuild services are always available. SPEC manufactures to an indu...
Click for complete description
- All SPEC Mini Twin *R-Trim* clutch kits come with flywheel and are rated up to 800 ft/lbs of torque, unless otherwise noted.
- Usage Key: S = Street, L = Limited Street, D = Drag, DR = Drift, RR = Road Racing/Time Attack, P = Pulling, R = Ralley
| (92-02) Mazda FD RX7 13B/REW - LS,RR,R |
$1,599.00 | $1,439.10 | | SZ47MTR |
|
|
|
pictures may vary
by application zoom
|
SPEC offers their Multi-disc clutch and flywheel assemblies for limited street, drag race and road race applications.
The Mini Twin assemblies are available in different clutch disc and flywheel materials, clamp loads, disc configurations and diameters. Each one with a specific recommendation based on the type of usage the vehicle demands.
These units are rebuild-able by SPEC or the end user and replacement components or rebuild services are always available. SPEC manufactures to an indu...
Click for complete description
- All SPEC Mini Twin *X-Trim* clutch kits come with flywheel, 3 discs and are rated up to 1200 ft/lbs of torque, unless otherwise noted.
- Usage Key: S = Street, L = Limited Street, D = Drag, DR = Drift, RR = Road Racing/Time Attack, P = Pulling, R = Ralley
| (93-02) Mazda FD RX7 13B REW - LS,D,RR,R |
$1,799.00 | $1,619.10 | | SZ47MT3 |
|
|
| |
|
pictures may vary
by application |
These 4 puck Feramic kits use an aggressive but street-driveable puck with a sprung hub. The disc is matched with a heavy duty pressure plate, release and pilot bearing.
These Feramic pucks go way beyond the holding capacity of ceramic pucks, and do so with great durability. These pucks are very street driveable - unheard of for clutches with this much holding power. The high holding capacity (110% or higher over the stock torque rating of the vehicle) of this clutch exceeds the ratings of s...
Click for complete description
| (93-95) Mazda FD RX7 1.3L Turbo Includes pressure plate, disc, bearing/s & alignment tool |
$1,190.00 | $1,123.50 | | 070840814 |
|
|
|
pictures may vary
by application |
These 6 puck Feramic kits use an aggressive but STREETABLE puck with a sprung hub. The disc is paired with a heavy duty pressure plate, release and pilot bearing.
These Feramic pucks go way beyond the holding capacity of ceramic pucks but have great durability. These pucks are extremely streetable. The high holding capacity (110% or higher over the stock torque rating of the vehicle) of this clutch exceeds the ratings of some multi-disc clutches!
Race Pro kits are recommended for those wh...
Click for complete description
| (93-95) Mazda FD RX7 1.3L Turbo Includes pressure plate, disc, bearing/s & alignment tool |
$1,271.00 | $1,207.50 | | 070840816 |
|
|
|
|
|
|
pictures may vary
by application |
These 4 puck Ceramic kits use a specially blended ceramic puck with a sprung hub. The disc is matched heavy duty pressure plate, release, pilot bearing and alignment tool. These unique pucks translate into a completely STREETABLE disc manners while offering lots of holding power
Sport Pro kits are for those who have upgraded past the basic bolt ons. Such as adding a turbo or supercharger to a naturally aspirated car. Utilizing Performance Chips, tuning larger than stock turbos & nitrous.
| (93-95) Mazda FD RX7 4Puck 1.3L Turbo Includes pressure plate, disc, bearing/s & alignment tool |
$959.00 | $903.00 | | 070830814 |
|
|
|
pictures may vary
by application |
These 6 puck Ceramic kits use a specially blended ceramic puck with a sprung hub. The disc is matched heavy duty pressure plate, release, pilot bearing and alignment tool. These unique pucks translate into a completely STREETABLE disc manners while offering lots of holding power
Sport Pro kits are for those who have upgraded past the basic bolt ons. Such as adding a turbo or supercharger to a normally aspirated car. Utilizing Performance Chips, tuning larger than stock turbos & nitrous.
| (93-95) Mazda FD RX7 1.3L Turbo Includes pressure plate, disc, bearing/s & alignment tool |
$1,017.00 | $955.50 | | 070830816 |
|
|
|
pictures may vary
by application |
The Unorthodox 8 puck Ceramic kit uses a specially blended ceramic puck with a sprung hub. These 8 puck kits also have a marcelled drive plate which helps improve drive ability over a standard button style clutch.
The disc is matched heavy duty pressure plate, release, pilot bearing and alignment tool. These unique pucks translate into a completely STREETABLE disc manners while offering lots of holding power
Sport Pro kits are for those who have upgraded past the basic bolt ons. Such as a...
Click for complete description
| (93-95) Mazda FD RX7 8Puck 1.3L Turbo Includes pressure plate, disc, bearing/s & alignment tool |
$1,075.00 | $1,018.50 | | 070830818 |
|
|
|
pictures may vary
by application |
These 4 puck Ceramic kits use a specially blended ceramic puck with either a sprung or solid hub. The disc is matched heavy duty pressure plate, release, pilot bearing and alignment tool. These unique pucks translate into a completely STREETABLE disc manners while offering lots of holding power.
Sport Pro kits are for those who have upgraded past the basic bolt ons. Such as a turbo or supercharger being added to a normally aspirated car. Chips, tuning larger than stock turbos & nitrous.
| (93-95) Mazda FD RX7 1.3L Turbo Includes pressure plate, disc, bearing/s & alignment tool |
$936.00 | $882.00 | | 070830804 |
|
|
|
pictures may vary
by application |
These 6 puck Ceramic kits use a specially blended ceramic puck with a solid hub. The disc is matched heavy duty pressure plate, release, pilot bearing and alignment tool. These unique pucks translate into a completely STREETABLE disc manners while offering lots of holding power
Sport Pro kits are for those who have upgraded past the basic bolt ons. Such as adding a turbo or supercharger to a normally aspirated car. Utilizing Performance Chips, tuning larger than stock turbos & nitrous.
| (93-95) Mazda FD RX7 1.3L Turbo Includes pressure plate, disc, bearing/s & alignment tool |
$971.00 | $913.50 | | 070830806 |
|
|
|
pictures may vary
by application |
Unorthodox 8 puck Ceramic kits use a specially blended ceramic puck with a solid hub. SportPro 8 puck kits also have a marcelled drive plate which helps improve drive ability over a standard button style clutch.
The disc is matched heavy duty pressure plate, release, pilot bearing and alignment tool. These unique pucks translate into a completely STREETABLE disc manners while offering lots of holding power
Sport Pro kits are for those who have upgraded past the basic bolt ons. Such as add...
Click for complete description
| (93-95) Mazda FD RX7 1.3L Turbo Includes pressure plate, disc, bearing/s & alignment tool |
$1,005.00 | $945.00 | | 070830808 |
|
|
|
pictures may vary
by application |
These kits include a segmented Kevlar disc, with a sprung hub, matched to a heavy-duty pressure plate. 100% pure Kevlar material in the Unorthodox design is superior to Kevlar blends which do not work. Lasting as much as 5 times longer than a stock clutch, these Kevlar units can handle a 30% increase over the stock clutches rating.
Street Mod kits are designed for those with basic bolt ons, such as headers and downpipes.
| (93-95) Mazda FD RX7 1.3L Turbo Includes pressure plate, disc, bearing/s & alignment tool |
$1,028.00 | $966.00 | | 070820810 |
|
|
|
pictures may vary
by application |
These kits include an organic disc, with a sprung hub, matched to a heavy-duty pressure plate and, depending on the car, a release and pilot bearing.
Lasting as much as 5 times longer than a stock unit in a stock vehicle, Unorthodox organic units can handle a 15% increase over the vehicles stock torque rating. Windowed organic can hold slightly higher loads.
Street Sport kits are designed as a stock performance upgrade for those who have upgrades from stock to basic bolt ons like air inta...
Click for complete description
| (93-95) Mazda FD RX7 1.3L Turbo Includes pressure plate, disc, bearing/s & alignment tool |
$855.00 | $808.50 | | 070810810 |
|
|
| |
|
|
