Mazda Parts | Mazda FD RX7 CoiloversWe found 41 Coilovers for the Mazda FD RX7 |
|
| |
|
| |
|
|
|
| |
|
pictures may vary
by application |
These are premium quality damper kits that give precise comfort and balanced handling cornering to sophisticate drivers without loosing there performance results. Our damper kits offer different series for your driving situation. SP Series was designed for all your driving conditions with greater performance. The full length adjustment system allows you to adjust various set-ups to meet different road conditions. And hard rubber upper and lower mount design in SP series absorb noise and vibratio...
Click for complete description
| (93-95) Mazda FD RX7 Model: FD3S |
$1,849.00 | $1,664.10 |  | CD1004-9398 |
|
|
|
pictures may vary
by application |
Premium quality damper kits that give precise comfort and balanced handling cornering to sophisticate drivers without loosing there performance results. Our damper kits offer different series for your driving situation. SP Series was designed for all your driving conditions with greater performance. This full length adjustment system allows you to set various set-ups to meet different road conditions. And hard rubber upper and lower mount design in SP series absorb noise and vibration to the cab...
Click for complete description
| (93-95) Mazda FD RX7 Model: FD3S |
$1,699.00 | $1,529.10 | | CS1004-9398 |
|
|
| |
|
|
|
| |
|
pictures may vary
by application |
Cusco Zero-1 Coilovers are for those looking for a high-quality coilover offering adjustable ride height without affecting spring preload. This will allow for propper corner-weighting for the ultimate handling experience. Furthermore, you do not have to give up any suspension stroke to change the ride height, resulting in a smoother, more consistent ride. The dampers and spring rates are pre-set before delivery to allow for the most user-friendly kit possible.
Features:
Fully adjustable r...
Click for complete description
- Upper Mounts are as follow:
P-AJ- Adjustable Pillow Ball
P-RG- Non-Adjustable Pillow Ball
A-RG- Aluminum Rigid Mount
| (93-95) Mazda FD RX7 FD3S- 10k Front/8k Rear; Rubber Upper Mounts |
$1,814.00 | $1,623.59 | | 422 60E CN |
|
|
|
|
|
| |
|
pictures may vary
by application  zoom
|
Designed for the optimum balance of traction, comfort, and adjustability, GReddy Type-S suspension kits offer the finest features like: large 46mm dia. pistons in a Mono-tube shock, 32 way adjustable damping, adjustable base and spring perches, thick billet upper mounts, and a lightweight coil springs. Instead of the common heavy spring rates, that offer harsh rides and easily loose traction on bumpy American roads, Type-S systems utilize a relatively softer spring with a longer stroke to maximi...
Click for complete description
 (9 of 10) 1 Review
| (93-95) Mazda FD RX7 (FD3S) |
$1,640.00 | $1,558.00 | | 14042201 |
|
|
| |
|
|
|
| |
|
pictures may vary
by application |
HKS Hipermax DRAG coilover kits provide the ultimate in drag racing suspension tuning with 30-way dampening, threaded dual-chambered shock assemblies and perches for height adjustment. Hipermax DRAG units are set up specifically for straight line performance.
| (93-95) Mazda FD RX7 |
$2,270.00 | $1,997.60 | | 80040-AZ003 |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
pictures may vary
by application |
Custom tuned suspension for the masses! JIC's FLT-TAR RS starts with their FLT-TAR coilovers. JIC works with the racer to custom tune the coilovers to the individual's needs. They also choose custom springs and dampers suited to each track or driving style. When necessary, helper springs are added to ensure the full stroke of the damper is utilized. Standard features are light weight 15 way adjustable monotube dampers that ensure high strength and fade free performance. The ride height is adjust...
Click for complete description
| (93-95) Mazda FD RX7 |
$2,821.00 | $2,623.53 | | FD3SFLTRS |
|
|
| |
|
|
|
|
|
|
|
pictures may vary
by application |
Ksport Slide Kontrol Drift Damper System provides the ultimate in suspension technology featuring its 36-way adjustable dampening, adjustable spring perch, adjustable body and pillow-ball mounts. The Ksport Slide Kontrol Drift Damper System has been designed to endure the extended abuse and extreme handling of drifting.
36 levels of dampening adjustment allow you to fine tune the ride to your handling and comfort needs. The dampening adjusts compression and rebound simultaneously for ease o...
Click for complete description
| (92-02) Mazda FD RX7 |
$1,700.00 | $1,603.95 | | CMZ10-SK |
|
|
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
pictures may vary
by application |
AL+Pro has all the features of the GR+ Pro, but uses an anodized forged aluminum shock body. This increases anti-corrosion properties while reducing unsprung mass, enhancing all aspects of performance without any drawbacks.
Features:
15-Way Damping Adjustable
Adjustable Camber Uppermount
Pillowball Uppermount
Cold Wound Linear Spring
Inverted Monotube Shocks
Dustboot
Aluminum Collars & Upper Mounts
Height Adjustable Lower Bracket
Helper Spring
- 1- Front Camber Uppermount; 2- Rear Camber Uppermount; 3- Inverted Front Shocks
- 4- Inverted Rear Shocks; 5- Front Helper Springs; 6- Rear Helper Springs
| (93-95) Mazda FD RX7 12k Front/12k Rear |
$1,749.00 | $1,574.10 | | ST-FD3S-AL+ Pro |
|
|
|
|
|
|
pictures may vary
by application |
GR+3 is Stance's top of the line coilover. The GR+ 3 features 3-way adjustability, enabling the driver to fine tune low-speed and high-speed bump separately from rebound. An external reservoir is connected to the damper using specially designed fittings that allow the line to swivel and disconnect for packaging and servicing convenience. An optional tool is also available to adjust the gas pressure to give the driver the ultimate adjustment control.
Features
15-Way Low-Speed Bump & 4-Way Hig...
Click for complete description
| (93-95) Mazda FD RX7 12k Front/12k Rear |
$3,499.00 | $3,149.10 | | ST-FD3S-GR+3 |
|
|
|
pictures may vary
by application |
GR+ Pro coilover has all the features of the GR+ but adds the benefit of a helper spring. The helper spring allows the shock piston to be placed in the optimal position within the shock body, increasing rebound stroke, and maximizing articulation on cars with minimum suspension travel.
Features:
15-Way Damping Adjustable
Adjustable Camber Uppermount
Pillowball Uppermount
Cold Wound Linear Spring
Inverted Monotube Shocks
Dustboot
Aluminum Collars & Upper Mounts
Height Adjustable Low...
Click for complete description
- 1- Front Camber Uppermount; 2- Rear Camber Uppermount; 3- Inverted Front Shocks
- 4- Inverted Rear Shocks; 5- Front Helper Springs; 6- Rear Helper Springs
| (93-95) Mazda FD RX7 12k Front/12k Rear (6) |
$1,495.00 | $1,345.50 | | ST-FD3S-GR+ Pro |
|
|
| |
|
pictures may vary
by application |
Developed in conjunction with Formula Nippon drivers on the track. Shock valving selected through extensive test data.
Front/Rear 4way adjustable dampening force
Removing unnecessary adjustments, each level of dampening force is easily distinguishable.
Super Heavy-Duty 210 Series Spring
Super heavy-duty spring capable of 2100N/mm in tensile strength provides track-worthy anti-sagging properties.
Upper/Lower Adjustable Coil-Over
Fully trhreaded casing enables minute adjustments such as stro...
Click for complete description
| (93-95) Mazda FD RX7 Spring Rate 14kg/16kg |
$2,200.00 | $2,090.00 | | TRR013 |
|
|
| |
|
|
|
|
|
|
|
pictures may vary
by application |
TEIN's experience in Tarmac racing has led to the development of HT dampers for Gymkhana and Auto-X competitions. The damping force curves and spring rates have been chosen for optimal grip on tight courses. Separate compression and rebound adjustment (16 x 16) enable fine tuning to match any driver to various course layouts. HT is intended for those seeking quick and crisp response on all types of surface conditions.
Additional Features:
Steel and Aluminum Construction
Mono Tube intern...
Click for complete description
- Attention!! Not compatible with the EDFC
- Uses OEM Upper Mounts unless otherwise noted.
- May be Special Order from Japan. Please inquire for more details.
| (93-95) Mazda FD RX7 18k Front/18k Rear |
| $2,390.00 | | DSM32-V1LS2 |
|
|
|
pictures may vary
by application |
The MONO FLEX coilover kit has been developed for entry-level competition motorsports and advanced street driving. Features include 16-way damping force adjustability (combined compression and rebound), a mono-tube internal design, pillowball upper mounts, and EDFC compatibility. There are independent adjustments for ride-height and spring pre-load settings for increased suspension tuning. The new Mono Flex also includes TEIN's latest technological innovation, Micro Speed Valving (MSV) system, w...
Click for complete description
- Tein Mono Flex are compatible with EDFC. Numbers in parenthesis refer to which Tein EDFC Motor Kit to use.
| (93-95) Mazda FD RX7 14k Front/12k Rear (4) |
| $1,944.67 | | GSM32-FUSS1 |
|
|
|
pictures may vary
by application |
With Tein supporting competition D1 drivers and vehicles over the years, they have had enough hands on experience to develop their Super Drift Coilovers. These coilovers were developed with the experienced drifter specifically in mind. Every aspect of the Super Drift Coilovers has been designed to aid in car control and aid in starting the initial drift.
Features:
Steel Construction
Twin Tube internal construction
Ride Height adjustable via threaded body and spring seats
16 way adjust...
Click for complete description
- Tein Super Drift are compatible with EDFC. Numbers in parenthesis refer to which Tein EDFC Motor Kit to use.
| (93-95) Mazda FD RX7 14k Front/14k Rear (5) |
| $1,703.63 | | GSM32-DUSS1 |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
Shopping Cart (0 items - $0.00)