You searched for 1997 Honda Prelude Pictures


All Honda Pictures
 
Click Add My Prelude to have your Prelude featured on our site.
 
 

                          

1996 Honda Prelude Pictures

   Sophia47862's 1996 Honda Prelude
  • Dyno: 200, 161 ft-lbs
  • Transmission: Stock Manual, 10lb Flywheel
1995 Honda Prelude Pictures

   Joe13269's 1995 Honda Prelude
  • Dyno: 161, 190 ft-lbs
  • Body: Window tint. Limo.
  • Motor: stock
  • Intake: AEM Cold Air
  • Transmission: SPEC Stage 3 clutch, Fidanza Aluminum Flywheel
  • Exhaust: DC Ceramic Header, Hi Flow Cat
1997 Honda Prelude Pictures

   Jeremie69037's 1997 Honda Prelude
  • Dyno: 187
  • Intake: JDM Type S air box with KN air filter
 
2000 Honda Prelude Pictures

   Matt40702's 2000 Honda Prelude
  • Dyno: 245
  • Body: Droped by Skunk 2 Springs, 3 inches off the ground.. The body is a 3,500$ paint job. With an OEM bod...
  • Motor: 2001 JDM H22A4 Swap
  • Nitrous: Contact me at AIM: preludejdmvtec
  • Intake: AEM Cold Air intake
  • Exhaust: DC Headers 4-2-1, Apexi N1 Catback Exhaust
98   Honda Prelude Pictures

   Jesus84841's 98 Honda Prelude
1993 Honda Prelude Pictures

   martin94's 1993 Honda Prelude
  • Dyno: 220
  • Motor: H22A 2,2vtec
  • Intake: K.N power filter
  • Exhaust: cat-back
 
1999 Honda Prelude Pictures

   Patrick41349's 1999 Honda Prelude
  • Dyno: 210
  • Body: Wings west spoiler, back lip, and side skirts.
  • Motor: Stock H22A
  • Intake: AEM Cold airdon't run cold air on this car without a bypass valve...I'm having to rebuild my engine ...
  • Transmission: Exedy clutch, Fidanza flywheel
1996 Honda Prelude Pictures

   Zachary38386's 1996 Honda Prelude
1994 Honda Prelude Pictures

   marcusan's 1994 Honda Prelude
  • Dyno: 160
  • Body: standard bodywork, rear spoiler, lowerd to almost the max depth.
  • Motor: BB21 4cil. 2259cm³ 118kw 4ws
  • Turbo: non
  • Nitrous: non
  • Cam: standard
  • Intake: cold air tenzo-r
  • Transmission: 5-speed manual
  • Intercooler: non or standard
  • Exhaust: skunk2 racing megapower cat-back exhaust system
 
1994 Honda Prelude Pictures

   dohch22a's 1994 Honda Prelude
  • Dyno: 200
  • Body: civic
  • Motor: federal
  • Transmission: lsd
1997 Honda Prelude Pictures

   Brian4999's 1997 Honda Prelude
  • Body: Euro carbon-fiber taillights, Momo carbon-fiber shift knob, high-definition headlights, custom vinyl...
  • Motor: Optima Red Top battery, , Manley titanium valves, Manley titanium valve springs, Manley titanium ret...
  • Nitrous: NX Nitrous Express wet kit 125 shot
  • Cam: Crower Stage 2 cams
  • Intake: Injen Race Division Intake
  • Exhaust: DC Sports Headers, Custom 2.25-inch exhaust piping, high flow cat, Tanabe exhaust
2000 Honda Prelude Pictures

   Gary69789's 2000 Honda Prelude
  • Body: ive owned the car since mid 04' and i have painted it three times since. its had the buddyclub 2 kit...
  • Motor: federal
  • Turbo: GT3582R with tial inlet/outlet v-band turbine housing, spoolin performance ram horn with egs bung. v...
  • Nitrous: dont need it i got v-tec
  • Cam: stock cams
  • Intake: filtered
  • Transmission: being rebuilt with carbon synchros quief lsd and new fifth gear.
  • Intercooler: precision 600
  • Exhaust: needs welding
 
1994 Honda Prelude Pictures

   DarkBB2's 1994 Honda Prelude
  • Dyno: 155, 136 ft-lbs
  • Body: DIY front lip, Accord Rear lip, Neuspeed Race springs, Tanabe rear under brace, fully gutted includi...
  • Motor: DOHC non vtec h23a1. Wire tucked, no a/c, p/s, egr delete, secondary intake runners removed. All sto...
  • Nitrous: I have shitty stock rings/ringlands, no.
  • Intake: Gutted factory airbox, KN drop in filter
  • Transmission: Exedy Organic clutch
  • Exhaust: Megan Racing SS header, Megan Racing test pipe, 2.5" exhaust that stops at the rear wheel
1993 Honda Prelude Pictures

   eugenekil's 1993 Honda Prelude
  • Body: Messed up Carbon Fiber OEM hood. Depo Projector Headlights w/ 8000K HIDs
  • Motor: JDM H22A
  • Intake: AEM Short Ram
  • Transmission: LSD Tranny Competition Clutch Flywheel w/ CC Stage 2 clutch
  • Exhaust: DC 4-2-1 headers Custom 2.5" piping Greddy Ti-C muffler
1994 Honda Prelude Pictures

   Cranston19901's 1994 Honda Prelude
  • Motor: H22A1 2.2L VTEC I-4. crower H beam rods, JE 11.5 compression, darton sleeves, crower springs, retain...
  • Cam: Crower stage2 cams with stock idle lobes.
  • Intake: Injen RD1700, Skunk2 intake manifold, 68MM throttle body
  • Transmission: Stock Rebuilt
  • Exhaust: DC header with 2.5" colector, 2.5" piping, GlassPack 2.5" inlet 4" Tip