You searched for 1997 Honda Prelude Pictures


All Honda Pictures
 
Click Add My Prelude to have your Prelude featured on our site.
 
 

                          

2001 Honda Prelude Pictures

   Joel38473's 2001 Honda Prelude
  • Dyno: 260, 150 ft-lbs
  • Body: carbon fiber hood
  • Turbo: drag turbo kit t3t4
  • Intercooler: drag
  • Exhaust: apexi n1
1998 Honda Prelude Pictures

   Amanda54942's 1998 Honda Prelude
  • Dyno: 200
  • Body: NSX Body Kit
  • Motor: Apexi N1 Exhaust, AEM Intake, Stainless steel headers, DC Short shifter, Moroso oil pan, Koyo Radiat...
1993 Honda Prelude Pictures

   martin94's 1993 Honda Prelude
  • Dyno: 220
  • Motor: H22A 2,2vtec
  • Intake: K.N power filter
  • Exhaust: cat-back
 
1994 Honda Prelude Pictures

   Darrell90614's 1994 Honda Prelude
  • Dyno: 175, 155 ft-lbs
  • Body: Vtec/O2 gas ratio controller dynode and setup for max HP output, rev limit at 8200rpm, DC sport cera...
  • Motor: secondary intake ports removed, 11.9 lb Rota Slipstream wheels, AVON Tech R tires for autocross/trac...
  • Intake: AEM Fender mods for cold air draw.
  • Transmission: Battery moved to trunk, Firdenza Flywheel, Spec stage III racing clutch, Flywheel horsepower is 230,...
  • Exhaust: Invidia Catback Race Exhaust, cat converter removed
1994 Honda Prelude Pictures

   Elliot22065's 1994 Honda Prelude
  • Dyno: 224
  • Body: Stock
  • Intake: KN Cold Air Intake
  • Exhaust: Injen
1999 Honda Prelude Pictures

   preludefreak's 1999 Honda Prelude
  • Dyno: 220
  • Body: stock body
  • Motor: H22a
  • Turbo: nope
  • Nitrous: no
  • Cam: Skunk2 pro Stage 2 cams and skunk2 valvetrain
  • Intake: AEM air intake
  • Transmission: automatic
  • Exhaust: custom catback
 
2000 Honda Prelude Pictures

   Matt40702's 2000 Honda Prelude
  • Dyno: 245
  • Body: Droped by Skunk 2 Springs, 3 inches off the ground.. The body is a 3,500$ paint job. With an OEM bod...
  • Motor: 2001 JDM H22A4 Swap
  • Nitrous: Contact me at AIM: preludejdmvtec
  • Intake: AEM Cold Air intake
  • Exhaust: DC Headers 4-2-1, Apexi N1 Catback Exhaust
1993 Honda Prelude Pictures

   Frogware's 1993 Honda Prelude
  • Body: Si Coupe
  • Motor: H22A JDM DOHC VTEC
  • Turbo: In process gathering parts can be lengthy due to price
  • Transmission: MANUAL
1993 Honda Prelude Pictures

   billybigdinners's 1993 Honda Prelude
  • Body: Standard
  • Motor: Adjustable fuel pressure regulator, AEM drive pulleys, uprated alloy radiator
  • Turbo: N/A
  • Nitrous: N/A
  • Cam: Standard
  • Intake: AEM induction with aftermarket filter
  • Transmission: Exedy lightened and balanced flywheel, uprated fast-road spec Exedy clutch
  • Intercooler: N/A
  • Exhaust: DC ceramic 4-2-1 manifold and downpipe, GReddy de-cat and back box with 4" straight cut tip
 
89   Honda Prelude Pictures

   david1969's 89 Honda Prelude
  • Dyno: 110, 110 ft-lbs
  • Body: 2 IN DROP- H-R SPRINGS- KONI SHOCKS, FRONT- REAR CUSCO STRUT TOWER BARS, FRONT- REAR CROSS DRILLED S...
  • Motor: modified b20a5- forged wiseco pistons - low compression 8-5-1
  • Turbo: TO BE INSTALLED SOON -
  • Nitrous: MAYBE AFTER EVERYTHING IS COMPLETE AND DYNO TUNED- MAYBE
  • Cam: STOCK DOHC
  • Intake: WEAPON R - UNTIL TURBO AND INTERCOOLER ARE INSTALLED
  • Transmission: 5 SPEED MANUAL
  • Intercooler: MISHIMOTO - PIPING WILL HAVE TO BE FABRICATED TO FIT
  • Exhaust: FABRICATED CUSTOM 2.5 IN EXHAUST
1996 Honda Prelude Pictures

   Zachary38386's 1996 Honda Prelude
1994 Honda Prelude Pictures

   Cranston19901's 1994 Honda Prelude
  • Motor: H22A1 2.2L VTEC I-4. crower H beam rods, JE 11.5 compression, darton sleeves, crower springs, retain...
  • Cam: Crower stage2 cams with stock idle lobes.
  • Intake: Injen RD1700, Skunk2 intake manifold, 68MM throttle body
  • Transmission: Stock Rebuilt
  • Exhaust: DC header with 2.5" colector, 2.5" piping, GlassPack 2.5" inlet 4" Tip
 
2001 Honda Prelude Pictures

   Rob63039's 2001 Honda Prelude
  • 1/4 mile: 15.54@90 mph
  • Motor: stock, AEM 3' ram air w/ Spectre filter
  • Transmission: stock 5 speed
  • Exhaust: Apexi WS2
1997 Honda Prelude Pictures

   Justinh22a4's 1997 Honda Prelude
  • Dyno: 190, 175 ft-lbs
  • Body: 5th gen prelude
  • Motor: 2.2 DOHC vtec h22a4
  • Cam: none yet
  • Intake: injen type r
  • Transmission: manual 5 speed
  • Exhaust: skunk2 megapower
1999 Honda Prelude Pictures

   The99PreludeSH's 1999 Honda Prelude
  • Dyno: 230
  • Body: vader
  • Motor: h22a4,
  • Intake: AEM cold air
  • Transmission: S80 LSD transmission
  • Exhaust: APEX'i world sport v.1 cat-back exhaust system,magnaflow high-flow catalytic converter