You searched for 1998 Honda Prelude Pictures


All Honda Pictures
 
Click Add My Prelude to have your Prelude featured on our site.
 
 

                          

1997 Honda Prelude Pictures

   mrsanja08's 1997 Honda Prelude
  • Dyno: 195
2001 Honda Prelude Pictures

   Mike17110's 2001 Honda Prelude
  • 1/4 mile: 15.62@80 mph
  • Body: Mugenauthentic Front bumper SEIBON CF Hood SEIBON CF Trunk JDM Side markers JDM Fog Lights Pre...
  • Motor: H22a4
  • Intake: Injen RD CAI
  • Transmission: Clutch Masters Stage 1 clutch Fidanza aluminum flywheel Nuespeed short shifter
  • Exhaust: Tanabe Ultra Medallion
1997 Honda Prelude Pictures

   Jim7192's 1997 Honda Prelude
  • Body: Wings West Avenger Body Kit, 18" Konig Traffic Wheels / 17" RSL Gunmetal Elites
  • Motor: Darton Cast Iron Sleeves, Crower Rods, JE 89mm Forged Pistons @ 10:1 with JET HOT coating, Balanced ...
  • Turbo: T3T4 Precision T304E .60/.63 AR turbine with E Trim Wheel
  • Nitrous: Crower Stage II Turbo Cams
  • Cam: Crower Stage II Turbo Cams 282
  • Intake: Mandrel Bend 2.5" Charge Pipe
  • Transmission: Shorter geared 4th Gen Transmission from '96 Prelude VTEC, ACT Street Strip Clutch, XTreme Pressure ...
  • Intercooler: RevHard 24x8x3" Front Mount
  • Exhaust: Custom Full 3" Stainless with Mandrel bends, HKS Carbon TI Muffler
 
1994 Honda Prelude Pictures

   Elliot22065's 1994 Honda Prelude
  • Dyno: 224
  • Body: Stock
  • Intake: KN Cold Air Intake
  • Exhaust: Injen
1998 Honda Prelude Pictures

   Washi's 1998 Honda Prelude
  • Dyno: 268, 253 ft-lbs
  • Body: Wingwest Racing Series Bodykit, Type R Wing
  • Motor: JDM H22, Skunk2 IM, Skunk2 68TB
  • Nitrous: custom 100shot direct port
  • Cam: Stock JDM H22 cams, Skunk2 valves, springs n retainers
  • Intake: AEM V2 CAI
  • Transmission: 5spd, OBX LSD, ACT Heavy Duty Pressure Plate with Sprung 6 Puck, ACT ProLite Flywheel
  • Exhaust: Megan Racing Headers, 3inch straight through, Vibrant bottle resonator, Magnaflow Race Series muffle...
1999 Honda Prelude Pictures

   josh74684's 1999 Honda Prelude
  • Turbo: Precision 5457, Tial wastegate, turbo xs blow off valve
  • Nitrous: Zex dry shot
  • Transmission: Excedy clutch and fidanza aluminum flywheel
  • Exhaust: Greddy
 
1992 Honda Prelude Pictures

   Paul39921's 1992 Honda Prelude
  • Body: Russell Performance SS brake lines with Hawk pads
  • Cam: Crower stage 1 cams with DarkStar gears
  • Intake: SRI with maxbore.com 64mm throttle body and portmatched intake
  • Exhaust: 2.5" Pacesetter with Magnaflow cat
1997 Honda Prelude Pictures

   Josh46389's 1997 Honda Prelude
  • Dyno: 210
  • Body: 17" ADR Wheels, Mugen Wing
  • Intake: AEM V2
  • Exhaust: Greddy EVO 2
1996 Honda Prelude Pictures

   Sophia47862's 1996 Honda Prelude
  • Dyno: 200, 161 ft-lbs
  • Transmission: Stock Manual, 10lb Flywheel
 
1995 Honda Prelude Pictures

   mark121855's 1995 Honda Prelude
  • Body: Coupe
  • Motor: H22a
  • Cam: Skunk 2 stage 1
  • Intake: Aem
  • Transmission: H22
  • Exhaust: dc sport
1993 Honda Prelude Pictures

   Ryan1801's 1993 Honda Prelude
  • 1/4 mile: 15.21@92 mph
  • Dyno: 210, 186 ft-lbs
  • Body: Stock
  • Motor: It is a 2.2 dohc vtec jdm motor
  • Transmission: Lsd transmission
  • Exhaust: 2 1/2 in pipin form the cat back with a canister
1999 Honda Prelude Pictures

   Ashley37279's 1999 Honda Prelude
  • Body: White, Prelude SH. Stock no modes yet
 
2001 Honda Prelude Pictures

   Sean60630's 2001 Honda Prelude
  • Body: Stock
  • Motor: H22A1 Block, Stock Crankshaft, Crower H-Beam rods, JE 11.5:1 CR Pistons, Iron Press-In sleeves, Ener...
  • Cam: 312/310 Crower Cams, Skunk2 Tuner series adjustable Cam gears
  • Intake: AEM V2 Short Ram
  • Transmission: Base Tranny Conversion
  • Exhaust: DC Sport Headers, Test pipe, Custom 3 inch exhaust with N1 muffler tip.
1994 Honda Prelude Pictures

   Cranston19901's 1994 Honda Prelude
  • Motor: H22A1 2.2L VTEC I-4. crower H beam rods, JE 11.5 compression, darton sleeves, crower springs, retain...
  • Cam: Crower stage2 cams with stock idle lobes.
  • Intake: Injen RD1700, Skunk2 intake manifold, 68MM throttle body
  • Transmission: Stock Rebuilt
  • Exhaust: DC header with 2.5" colector, 2.5" piping, GlassPack 2.5" inlet 4" Tip
1993 Honda Prelude Pictures

   billybigdinners's 1993 Honda Prelude
  • Body: Standard
  • Motor: Adjustable fuel pressure regulator, AEM drive pulleys, uprated alloy radiator
  • Turbo: N/A
  • Nitrous: N/A
  • Cam: Standard
  • Intake: AEM induction with aftermarket filter
  • Transmission: Exedy lightened and balanced flywheel, uprated fast-road spec Exedy clutch
  • Intercooler: N/A
  • Exhaust: DC ceramic 4-2-1 manifold and downpipe, GReddy de-cat and back box with 4" straight cut tip