Testimonials (8,057)




2013NovOctSepAugJulMayAprMarFebJan
2012DecNovOctSepAugJulJunMayAprMarFebJan
2011DecNovOctSepAugJulJunMayAprMarFebJan
2010DecNovOctSepAugJulJunMayAprMarFebJan
2009DecNovOctSepAugJulJunMayAprMarFebJan
2008DecNovOctSepAugJulJunMayAprMarFebJan
2007DecNovOctSepAugJulJunMayAprMarFebJan
2006DecNovOctSepAugJulJunMayAprMarFebJan
2005DecNovOctSepAugJulJunMayAprMarFebJan
2004DecNovOctSepAugJulJunMayAprMarFebJan
Marc Welch
06/30/2004
-----------------------------------
Tom, I wanted to thank you for all your help. You were a pleasure to deal with and I will most definately recommend you all to all my friends. This is one of the best experiences I've had with an aftermarket parts company in a long time. Thanks for everything.

JoSh Fuller
06/30/2004
-----------------------------------
It could be a tad smaller and have mounting brackets or even better mounting points in the case besides the two bolts that hold the unit together. You should also sell extended serial cables and a serial Yadaptor. If you contact me with price ill buy them from you. JoSh

Scott Westenskow
06/30/2004
-----------------------------------
A "Must" upgrade for any twin turbo owner. Fit and finish are good. Installation was fairly easy. Best part was the item was in stock at HPF and with a quick trip to their store it was in-hand. Caused the exhaust bypass valve to rattle under deceleration (maybe its just my valve) Exhaust note combined with the Veilside Tear Drop is "In Your Face" I like it.

Thomas Poore
06/30/2004
-----------------------------------
The sound needs to be made more highpitched. It was easy for what it came with to install but the turbo kit didn't have a place for it so we had to drill our own hole, and the quality of was very good.

Scott Westenskow
06/29/2004
-----------------------------------
Nice Piece. Good Gains after #2 spool. Fit and finish are excellent. Installation is simple but spend a little time and get it hanging properly. Clearance is good. Flange could be a little beefier. Exhaust Note has a nice mild rumble at idle with an intense growl at WOT. I like it!

Wiley Smith
06/28/2004
-----------------------------------
I have yet to install this part but it looks to me like it is a quality product. It has some kind of powdercoating on it and I noticed that it is also on the inside and over the welds, which is good. I think it will definitely make a difference in performance simply because it is bigger than stock. Also, this part is supposedly a bolt-on replacement, but like I said, I have yet to install it, so I'm not sure about that.

Daniel Higgins
06/28/2004
-----------------------------------
excellent part.....about a 4 out of 10 for installation difficulty.....huge HP gains, and even more with new injectors!

Jim Tanner
06/28/2004
-----------------------------------
Excellent pads for the street. No noise, some dust. I would buy these again. However, look for more aggressive pads for road racing. I glazed the HPS pads at my first outing at TGPR, which is a fairly slow track.

Jim Tanner
06/28/2004
-----------------------------------
Excellent product, works as advertised. The only caveat is to make sure your display matches your interior. I bought the red display, and when I see it out of the corner of my eye, I panic thinking it's the general purpose warning light. In retrospect, I should have bought the green display, or waited a couple of months to get the gauge display.

Patrick Paluda
06/28/2004
-----------------------------------

James Maloney
06/28/2004
-----------------------------------
It could use installation instructions. However once in this run nice and look good. Thanks for the help!

Rizz Claiborne
06/28/2004
-----------------------------------
To whom it may concern, I know nothing about cars, but needed some after market parts for my son. Your staff was excellent. The young man I worked with was very pleasant. He went well beyond his job description and made my experience wonderful. I think this young mans name is Tom Hughes. Is is a great asset to your company. I hope you treat him well! A little raise wouldn't either. Please let him know of his excellence!

Mark Domke
06/28/2004
-----------------------------------

Jason Harrison
06/28/2004
-----------------------------------

Jack Tertadian
06/27/2004
-----------------------------------
Had no problems personally, but have switched to RPS flywheel because HPF said their 6 puck disc sometimes has welded to the Fidanza flywheel causing shift problems.

Jack Tertadian
06/27/2004
-----------------------------------
With RPS PP and flywheel, slipped twice on NOS (about 760hp) but since that has been great. Not juddery at all. My favorite single disc/pp combination by far!

Jack Tertadian
06/27/2004
-----------------------------------
So far, working well with HPF 6 puck disc; slipped a little twice on NOS (up to 760hp), but since, has been fine.

Tommy Salazar
06/27/2004
-----------------------------------
work great gave my car lot power

Emilio Navarro
06/26/2004
-----------------------------------
great price, great service and will buy from horsepower every time.

Greg Zinsser
06/26/2004
-----------------------------------

Justin Ferrell
06/26/2004
-----------------------------------
Top notch product. Very easy install. Easy to read display. Great quality. Compact. Wonderful customer service from horsepowerfreaks! Two thumbs up from me!

Brent Ludvigson
06/26/2004
-----------------------------------
The product works as advertised. It has dramatically decreased my engine compartment temperature. I also feel that it has helped improve the turbo's spool up (I also wrapped the down pipe). The kit was somewhat dificult (read time consuming)to install and the outside aluminum barrier is somewhat fragile. The kit contained enough wrap to even cover all the intercooler piping as well. My biggest complaint is with the instructions which were not detailed enough, and with manufacturer support. I emailed the manufacturer with a question and never received a reply.

Brent Ludvigson
06/25/2004
-----------------------------------
The part was just as advertised high quality product which works very well on my MR2T. Nice low tone and just a few extra decibels of performance enthusiest sound.

Jorge Cantres
06/25/2004
-----------------------------------
The product performed well. The iridium plugs did not last as long as I thought they will. I have a 720rwhp 95 Supra that I use as my everyday car, with some stop and go traffic.

Major Lewis
06/25/2004
-----------------------------------

Adam Munaretto
06/25/2004
-----------------------------------
shipment received.....Thanks, you guys rock!

Adam Evans
06/25/2004
-----------------------------------
Thank you guys so much. I recieved my package yesterday. Even faster then i expected. Great doing business with you. Thanks

Jay Heckler
06/25/2004
-----------------------------------
Joe, Wanted to drop you a quick line about my clutch. First, thanks for your help making sure I had what I needed. It had it installed and Iím just about through the break in period. I am a big fan of this clutch. The flywheel is so much lighter than stock the turbo spools up quite a bit quicker. Again, thanks for all of your help on this.

Tim Zwicky
06/24/2004
-----------------------------------
Part was exactly what I expected, and it installed with no issues.

Erron Spalsbury
06/24/2004
-----------------------------------
The Fidanza is a great flywheel. Bolted right up without any fitment issues. Overall, it made the car feel "lighter". It rev's faster and pulls through the powerband faster than before. A great product, i'd reccommend it to anyone!

Patrick Aime
06/24/2004
-----------------------------------
HORSE POWER FREAKS HAS GOOD PRODUCTS BUT NEEDS TO ADD A LITTLE MORE IN EACH FIELD SUCH AS MORE BRANDS BUT I AM PROUD TO BE A CUSTOMER AND WILL ALWAYS REFER CUSTOMERS TO YOU. THANKS FOR THE E-MAIL

Albert Raczynski
06/24/2004
-----------------------------------
HKS is on the spendy side, but always delivers a quality product as usual. Highly reccomended as far as cam gears. No bullsh*t, no incorrectly marked scales. Very nice functioning, as well as looking piece.

Eric Glenn
06/24/2004
-----------------------------------
Works great

Eric Glenn
06/24/2004
-----------------------------------
It was easy to install and works, what else can I say.

Eric Glenn
06/24/2004
-----------------------------------
So far, I absolutely love the FJO wideband kit, the gauge looks great and performs flawlessly.

Jeff Langan
06/23/2004
-----------------------------------
Hard to install, but nice gains.

Christian Shar
06/23/2004
-----------------------------------
clutch went from being somewhat weak to the feel of a truck this is a good thing. very tight shifts. put in new motor at the same time and the power increase on the clutch is holding compared to a stock unit. when breaking in, the pressure plate was very tight and has since easied since putting over 2K on car. I don't know if the power increase in the engine causes a misshift or if the clutch does not react fast enough or I now have syncro problems. barks tires thru third when shifted right. power take off holds very well.

xaris Kaneis
06/23/2004
-----------------------------------
Amber You are the best! Thank you again for everything!

Ricky Caldwell
06/23/2004
-----------------------------------
Great Product, even better customer service! I have reccomended this site to others and will continue to do so! Ricky Owner- Silverbeast.com

Tom Lang
06/23/2004
-----------------------------------
I bought these pads to hold up under aggressive street and light track use, and they fit the bill just fine. My only complaint is that they dust a lot more than the stock pads, even during normal street use. But the dust washes off easily from the wheels, so it's not really a big deal, just a pain in the butt.

Daniel Higgins
06/23/2004
-----------------------------------
super easy install(alone in under 2 hrs), great sound-not whiny, maybe SLIGHT hp gain....good quality, but alittle pricey(HPF still had the lowest price)

Corey Isaac
06/23/2004
-----------------------------------
Thanks a lot, you guys are way better then suprastore.com

Juan Nazario
06/23/2004
-----------------------------------
Did not come with all the tools needed and it wasn't all that flexible but other than that looks great on the vehicle.

Mike Ille
06/22/2004
-----------------------------------
The intake did just what it was sopose to do, what else could i want out of it? It gave my exhaust a throaty sound along with a unique noise when accelerating. The only thing i didnt like was the fact that the label on the intake itself is hard to see when your trying to show off your engine.

Chris Walker
06/22/2004
-----------------------------------
Sliders fit perfect. They were a little rough at first during seat adjustments but work flawlessly now.

Scott Leach
06/22/2004
-----------------------------------
The Skunk2 short shifter is outstanding, compared to those other ones out there. I feel a major difference in shifting through the gears.Great quailty all around. Horsepower freaks have the best customer service on thier orders and ordering on the web, HANDS DOWN!!!!!!! Thank you H-freaks

Brian Spieth
06/22/2004
-----------------------------------

Brian Spieth
06/22/2004
-----------------------------------

Brian Spieth
06/22/2004
-----------------------------------

Brian Spieth
06/22/2004
-----------------------------------

Brian Spieth
06/22/2004
-----------------------------------

Brian Spieth
06/22/2004
-----------------------------------

Patrick Dalton
06/22/2004
-----------------------------------
Tein Flex Coilovers have to be one of the best additions anyone can make for a MKIV Supra. The range of adjustability is awesome, they can be adjusted to a very comfortable setting for rough roads. I have compared them to the Tein HA's and there is simply no comparison. Anyone who purchases the Tein Flex's will be satisfied.

Patrick Dalton
06/22/2004
-----------------------------------

Patrick Dalton
06/22/2004
-----------------------------------

Patrick Dalton
06/22/2004
-----------------------------------

James Whitney
06/21/2004
-----------------------------------
the daisy chain link up is a great idea, but if you get a faulty unit (like I did) it can be a nightmare. Especially if you try to send it back. But once you get a working unit... it rocks

James Whitney
06/21/2004
-----------------------------------
great gauge, a bit of time took to install the proper T-fitting from the fuel reg. but not a fault of Defi. But unit works great.

James Whitney
06/21/2004
-----------------------------------
very accurate gauge and easy to install

Peter Palamara
06/21/2004
-----------------------------------

James Navarrete
06/21/2004
-----------------------------------

Jean-paul Courneya
06/21/2004
-----------------------------------
I am very satisified with this clutch kit. The grabbing power is very pleasing to me. The clutch does wonders compared to the stock clutch previously in my integra. I would reccomend the product to anyone doing moderate but significant work on their car. To express the grabbing power let me say that before the clutch i could never chirp second gear, now i am chirping third. Thanks Exedy and thanks Horsepower freaks.

Doug Vanata
06/21/2004
-----------------------------------
It works great! Installed in no time and ready to drive. The top end gain in HP is phenominal. Thanks for a quality product!

Jason Frayer
06/21/2004
-----------------------------------
Very very nice. Easy to install and works perfect. Turbo response and and a steady boost level is a huge difference over MBC. Also has a built in boost gauge that is great.

Ashraf Shabudin
06/21/2004
-----------------------------------
Ultimately, I got the seat base to work, but wasn't 100% satisfied with the build quality. I suspect the jig used to build the unit(s) are not completely aligned. I also wasn't completely satisfied with the materials quality used, but ultimately this proved a moot point as I did get the base to fit my application and it is working fine. I give a rating of 7/10 for unsatisfactory fit-and-finish, but the part does what it says it is supposed to do, albeit with some minor modifications (bending, shaving, etc).

Derek Ray
06/21/2004
-----------------------------------
this product was nice but the fitting's on the sides of the piece you mount the filter on, not many aftermarket pieces fir into them, for instance, an oil temp sending unit, and some types of oil pressure units, other than that, it's a good product, hoses could be a little longer for more places to put it, but it works well. -Derek

Adibp Chirinos
06/21/2004
-----------------------------------
Some of the wires were too long and bending them over to try to fit properly damaged them in the long run, had to replace them.

Antonio Aganon
06/21/2004
-----------------------------------
The install was pretty simple. The hardest part is removing all the stock intake parts. After that the install is easy. The intructions could be better by AEM. The install too about an hour. The gains from the AEM CAI are noticeable right after install. The car feels more responsive and I can definitely feel the power at high RPMs. The quality of this product is great, can't really complain about any of the parts.

Joshua Willetts
06/21/2004
-----------------------------------
easy install fst shippng great products thank you

Brian ONeal
06/20/2004
-----------------------------------
I would have rated it a 10 except it had a scratch on the side of the oil catch can and I didn't feel like sending it all the way back and waste to much time on nonsense.Other than the scratch it came very fast and I didn't have any other problems.

Todd Dunham
06/20/2004
-----------------------------------
I've read bad things about Turbonetics, but so far the only real problem I've had was not getting what I ordered. I had to send the first turbo back cause it was the wrong one. I chose the water cooled housing and made a hard drain line so there was considerable fabrication effort to install the unit. It made a huge improvement in power once I got things dialed in. Especially above about 4800 rpm. Seems the stock CT-26 is pretty much done by that rpm at high boost levels.

Todd Dunham
06/20/2004
-----------------------------------
Fabrication required.

Christian DeReu
06/20/2004
-----------------------------------
i love it and everyone i know loves it. i hav converted many from hks to greddy. hank you

Fred Rose
06/20/2004
-----------------------------------
It was easy to install and works well with low boost, 10lb wastegate spring - 16 lbs boost. When you try to take it up to 18/19/20+ becomes very unstable. It does not hold steady boost like at lower values. I am changeing my spring to a 15lb. I hope it will run steady at 25lbs. If not I am going to go get something else. If you want it for low boost it is a 9 but if you want run high boost only a 5, that high mainly because of the other options that are on it.

Peter Palamara
06/20/2004
-----------------------------------

Dustin Jantz
06/20/2004
-----------------------------------
i purchased the PLX devices wideband for a few reasons. 1. price 2. availability 3. because shawn at torquefreaks said it read accurately the PLX devices wideband is very nice. the only downside it has is a 1/100ths digit which is not needed. really it should have the main A/F ratio with 1/10th decimal. as far as i can tell its very accurate and extremely quick. for the price you cant beat it. the only reason i didnt give it a 10 on the scale is because i do not have a dyno with a seperate wideband to compare its accuracy.

Jerry Roberts
06/20/2004
-----------------------------------
The Koyo rad was a direct replacement for the stock rad. Took me about an hour to install. Water temps have stayed in the 180 range no matter what the driving style or outside temp and humidity. Corrosion during winter or at anytime, HA! It laughs at salt and road grime and still as Chinny as when I bought it about a year ago. Very nice polish to the end tanks. I WILL buy another when the time comes for another project..

Leonardo Saldivar
06/20/2004
-----------------------------------
i loved the product, price, and service from you guys. thanks. leonardo

Douglas Hess
06/19/2004
-----------------------------------
The two intake have are just flared ends when they should be bead rolled to provide a better seal without cutting into the hose.

Gregory Walkowski
06/19/2004
-----------------------------------

James Babcock
06/19/2004
-----------------------------------
As far as a good street performance suspension goes, I think these are great. Very close to stock ride. If anything, I think they could be a bit stiffer. They also gave my Integra a perfect stance. Not too low, just right. The only other comment I have is that the instructions say not to cut the bump stops, but if you don't you are only left with about 2 inches of suspension travel.

Kenneth Keller
06/18/2004
-----------------------------------
This header is a good one. I am not sure if it merits the high price but I have been pleased with it none the less. Installation went smoothly except that I had to cut some bolts to get the old manifold off, but that had nothing to do with this product. Great performance when coupled with cold air intake and cat back system. I put this part on before the muffler to feel the difference and it was noticable right away in both sound and power. The sound that this header makes is great. Throaty and powerful sounding. In retrospect I wish I had gone with the stainless set rather than the ceramic coat but I am overall happy with it and the service from Horse Power Freaks. Thanks

Kenneth Keller
06/18/2004
-----------------------------------
I was very pleased with this cold air intake. I had no trouble installing it. It had a whistle at about 1500 rpm but adjusting how far the filter was pushed on the induction tube seemed to get rid of it. The car felt more responsive to throttle but was hard to tell if it was just that it sounded better. When I installed a header and exaust there was no mistaking the power improvements. Gas mileage went up 2 mpg. I am very pleased with this product and Horse Power Freaks service. Thanks

Tavvy Navarro
06/18/2004
-----------------------------------
Thank you for your great service, it is much appreciated. You guys are awesome, I will most definately order from you in the future!

Richard Jackson
06/18/2004
-----------------------------------

michael jones
06/17/2004
-----------------------------------
Hey guys...thanks for all the support. I move to Germany in a week and everyone has been extremely customer focused with getting me parts quickly. I could find slightly cheaper prices at other locations, but I kept coming back to HPFreaks because of the service and quick responses/replies. You really made the difference. Hope to have pics up soon of what you helped me build . Definitely intend to continue to shop at HPFreaks even while in Germany. Thanks again. Special thanks to Ron Wyman!

Charles White
06/17/2004
-----------------------------------
No complaints about these, they were a slight headache to install, but that is not due to the Jun design, it is just the nature of this modification. I like the no BS finish of these gears, all business, no pink or purple in sight! I installed the exhaust side cam gear about a year before the intake side and definitely noticed better midrange torque. I don't have before and after dynographs with otherwise equal mods, but I think I probably gained some peak torque also. The intake side cam gear made a more subtle difference and I do have dyno comparisons. The actual peak difference after the intake side cam gear was only 3-4 RWHP. The high rpm range was definitely a bit better overall though and this can be felt on the highway.

Jose LLamas
06/16/2004
-----------------------------------
The springs feel as if they were factory springs. They are good not like thoes cheap ones you see bouncing around. The only negative thing was that it did not lower much from the front as i wanted, at least to eliminate the gap. Other than that they are good and very inexpensive. (03 RSX skunk 2 springs)

William Hinger
06/16/2004
-----------------------------------
The rotors have been great and hold up really well. It wouldn't make sense to get stock replacements over these for the price. In the year I have had them, I have had no problems at all. Which is much better than stock for what they're put under.

Steven Hinger
06/16/2004
-----------------------------------
The Exh. System was awesome. Was a perfect fit and is still beautiful. Gave it a much more aggressive run.

Darrell Moskowitz
06/16/2004
-----------------------------------
I had it installed by a shop along with flywheel. I run this car in Solo1 and Solo2 SCCA events in Solo1 on the track for 30 mins it seems to get hot and slip a bit, maybe that will get better with time or I need a stronger clutch, anyway we will see. For Solo2 and the street it's fine. I rated it a 6 cause I need to know how long it will last before I can give it a higher rating.

Darrell Moskowitz
06/16/2004
-----------------------------------
The RPM's seem to climb faster then before, I had it installed by a Transmission shop along with the TZ clutch.

Rusty Moore
06/15/2004
-----------------------------------
You guys rock! I destroyed my rear suspension over the weekend (but luckily not the Tein Coilovers I got from you) and I really didn't expect you guys to be able to ship this stuff out this week. I realize that is an estimated ship date, and you may run into problems, but I am still happy to see the quick response.

Albert Mitchell
06/15/2004
-----------------------------------
Lots of power. The oil seals on my first one toasted, so I sent it back. 1 week later Turbonetics sends me a 62-1 (bigger). I didn't mind. This turbo is awesome. Great quality! Can't wait to get the fuel mods in so I can put 20 psi to my car.

Albert Mitchell
06/15/2004
-----------------------------------
I bought this along with a 11 lb Unorthodox FW. This combo definitely hates traffic (chatters). But, when you put the power to it, it holds like crazy. I was able to chirp the tires shifting from third to fourth at 90 mph while only boosting 10.5 psi.

Albert Mitchell
06/15/2004
-----------------------------------
I bought this along with a South Bend DXD Clutch. This combo definitely hates traffic (chatters). But, when you put the power to it, it holds like crazy. I was able to chirp the tires shifting from third to fourth at 90 mph while only boosting 10.5 psi.

Albert Mitchell
06/15/2004
-----------------------------------
Kinda soft. I am experiencing some rubbing up front. I love the stance that it gave my car. The back sits higher by about an inch.

Albert Mitchell
06/15/2004
-----------------------------------
Install was easy. Good quality, haven't blown them yet.

Albert Mitchell
06/15/2004
-----------------------------------
Great replacement if you don't want to loose factory TEMS.

Randy Mildenberger
06/15/2004
-----------------------------------
great part great tunning tool only draw back no gauge to view

Randy Mildenberger
06/14/2004
-----------------------------------
great cam makes big power

Randy Mildenberger
06/14/2004
-----------------------------------
great cam makes big power

Randy Mildenberger
06/14/2004
-----------------------------------
the part is great works great the only draw back is no gauge but they make one now

Julio Rodriguez
06/14/2004
-----------------------------------
Excellent Product. Very good fit and finish. Excellent feel of the Car's dynamics - better than the previous Eibach's.

Julio Rodriguez
06/14/2004
-----------------------------------
Noticeable reduction of the 'Shakes' of the Supra without the Targa top.. May not be as high as 80% reduction as advertised but maybe a 50%. Very Good finish. Very tight during installation - some white nuckles here.. but good fit.

Julio Rodriguez
06/14/2004
-----------------------------------
Excellent Product. Highly visible both day and night.. Very accurate and good response. Easy to use and program. Only complaint - no night illumination for the Control unit.. (I have the 1st generation - Defi Link I) little difficult to locate operate buttons at night. Overall - Excellent.

David Watson
06/14/2004
-----------------------------------
This is a very good replacement for the 17 year old wire I had, these plug wire are a definite must for any mk3 owners. I installed these and notice the car idles better, starts better, and has less misfires when running higher boost.

Dwaine Berube
06/14/2004
-----------------------------------
the part is great makes a very loud pshsh on my mr2. very pleased..quicker turbo spool also with an intke and a 2.5 inch down pipe makes a graet difference.

Mike Migneco
06/14/2004
-----------------------------------
this part is what I expected, quality is great, and it works fine. Engine runs smooth now, it gain power, it was what I was looking for

Mike Migneco
06/14/2004
-----------------------------------
this part is what I expected, quality is great, and it works fine.

Mike Migneco
06/14/2004
-----------------------------------
this part is what I expected, quality is great, and it works fine.

Mike Migneco
06/14/2004
-----------------------------------
this part is what I expected, quality is great, and it works fine.

Rick Cancino
06/13/2004
-----------------------------------
my stock clutch started slipping at 67K so i figured i might as well get the clutch and flywheel at same time. With the ACT setup you dont have to worry about stepping the flywheel cause it comes perfect matched up for the Clutch and setup. (I installed an ACT 2600 with this flywheel) I also had a new Pivot ball and Clutch fork installed (mitsupartsdirect.com $55) because when the pivotball starts to grind down it looses its height and thus gives you less leverage so its more difficult to disengage the clutch. For the first week or so, the clutch was really strong and hard to push, but once it broke in, i think its fantastic. the flywheel is near to that of stock except on second gear and above it spools down faster so you have to relearn rev-matching. Ive done some fast take offs and theres no smell at all because theres no slippage. granted its not indestructible but it sure is a hellofa improvement. Do NOT drop this clutch unless you are bored and want to buy a new transmission. You may slip her in hard, but do not drop!

Matt Shay
06/13/2004
-----------------------------------

Enrequis Gentry
06/13/2004
-----------------------------------
Tanabe Springs are awesome! After installing the part as well as strut and sway bars, I ran the car at a place called Deal's Gap; 318 curves in an 11.8 mile stretch. The handling was incredible.

Enrequis Gentry
06/13/2004
-----------------------------------
A few minor adjustments had to be made to properly instal the part but it was no problem. I saw significant gains and the sound is great.

Shane Sullivan
06/13/2004
-----------------------------------
installed w/ motor out of car, so was pretty easy install, said they were steel pipes so bought steel flange for BOV, all charge pipes were aluminum though, had to get custom pipe made noticeable gain. 93 EX 8lbs. daily driver

William Anthony
06/13/2004
-----------------------------------
This gadget is everything I was expecting, and a little more. It's cheaper than a stand-alone, but still manages to do quite a bit of stuff. Most of my friends that I've shown it to want one now. It's great!

Kent McElrath
06/13/2004
-----------------------------------
It took 10 minutes to install. The fit and functions was flawless. However, I replaced it with a different one simply because it was too loud for my taste.

Kent McElrath
06/13/2004
-----------------------------------
Truely a perfect fit, combined with the proper connector kit the installation was the easiest I have ever done. It functions perfectly in every mode.

Josh Seaman
06/13/2004
-----------------------------------
Lots of bends for pretty cheap, fabbed up all the ic piping for my mkiii farely easily, could use maybe a couple more couplers, and i dislike ringworm clamps, but for what you get for the price its perfect.

Mike Hartigan
06/13/2004
-----------------------------------
um..yeah check engine light wont go off cause of the the EGR valve not being connected...dont know how to get around this problem...makes the car run really rich and i get crap for gas mileage and performance is down since installed...some help about the check engine light would be appreciated alot

Danny Zhu
06/13/2004
-----------------------------------
Not much to say, just a straight pipe; looks good and is very easy to install.

Danny Zhu
06/13/2004
-----------------------------------
Easy to install, very streetable and feels just like stock.

Justin Morse
06/13/2004
-----------------------------------
Good product does its job for the price

Chris Hendrickson
06/13/2004
-----------------------------------
Not the easiest to install, but not difficult, just time consuming. I didn't install for the purpose of power gains, however I have slightly quicker throttle response. I don't have concerns about the ignition capability when running wide open, which is the reason I originaly installed. It affords me a safety margin. Advise coil pack replacement at the same time, especially if vehicle is near scheduled change mileage for coil packs.

Chris Hendrickson
06/13/2004
-----------------------------------
Unbeatable Toyota quality, and simple installation that was engineered into the original design by Toyota. I replaced as a precaution to prevent possible problems. I paired these up with HKS Twin Power DLI and Iridium plugs and it seems I have quicker throttle response.

Chris Hendrickson
06/13/2004
-----------------------------------
A complete system except for the most important part, directions.

Leonel Brodhead
06/13/2004
-----------------------------------

Angella Fagundes
06/12/2004
-----------------------------------
Awesome sound and look. the silencer wasn't needed because it doesn't emit a ricey annoying sound. Looks clean, sounds deep but very clean! Performance difference was noticed. Would recommend 100%

Daniel Heifer
06/12/2004
-----------------------------------
the turbo timer was easily installed in about 30 minutes id say with the harness. you just plug in the harness and i found the wire i needed from the ecu to use the automatic function and soldered it on in a few minutes. finding the ebrake wire took another 10 minutes till i found it and pulled slack out of it so i could cut and solder it to the turbo timers harness. i know some other turbo timers have other functions but i only wanted this so i could use the turbo timer and only that. since i have a vr-4 i dont have a volt gauge so the built in volt meter is a plus. the controls are very easy to use as well as long as you spend a couple minutes to actually read the directions :)

Ron Friday
06/12/2004
-----------------------------------
Outstanding!! I love the look and functionality of the unit. Through dyno testing I discovered that my stock tach was off by several hundred RPMs in the higher bands (I'm running a raised rev limit ECU). The installation of this unit gives me better visibility to those higher RPM bands, and appears to be reading much more accurately.

Ron Friday
06/12/2004
-----------------------------------
The controller replaced my old Greddy Profec b (Spec I). It installed very easily with no surprises. The instructions took a few times to read through to really figure out all the functionality. It appears to work very well in holding/controlling boost. The only real complaint that I have is that the screen is very difficult to read in the daylight because it picks up glare very easily... which is really a shame becasue I find the graphical display very helpful. All in all, a good product which I am satisfied with thus far.

Kevin Harper
06/12/2004
-----------------------------------
great brakes

Brad Dennis
06/12/2004
-----------------------------------
Excellent fit and quality. It went on easy and performed perfectly. The sound of this bov is awesome.

Alvaro Patino
06/12/2004
-----------------------------------
Nice Exhaust. It Slants a Bit to the Right, but other than that sounds great! Took of the Silencer the second Day. And Got a lot of Attention. Good for those days that you really want to Sound Off!

Gary Weisel
06/12/2004
-----------------------------------
They fit perfect and work good.

Fred Rose
06/12/2004
-----------------------------------
Overall the unit works great and does what it should, I have only been running it for 2.5 weeks. It was fairly easy to install once you get the correct connections. The documentation that came with the unit did not include the make and model of my car. So I went to their web site and found it. But it was wrong. I had to go to the forums to find the correct settings. If it was not for the Documentation, I would have given it a higher rating. I am using it on a 97 Lexus SC300 with a t61. Tuning this car with this unit as my only added fuel controler on 93 octane 16 lbs of boost we did 424.5 whp. Overall very happy.

Michael Hookman
06/12/2004
-----------------------------------
good power gain with 1psi loss do to large size

Jimmy Nguyen
06/11/2004
-----------------------------------
It looks beautiful in my engine bay and i love listening to it humm. You get what you pay for. thanks freaks

Kevin Price
06/11/2004
-----------------------------------
Sweeeeeeet, Service and product!!

BRIAN WALKER
06/11/2004
-----------------------------------
Excellent material and welds. This exhaust hugs the bottom of the frame so it doesn't hang too low. There is a nice deep tone but with 3.125" piping it is very capable of flowing more than enough for 90% of supraholics.

BRIAN WALKER
06/11/2004
-----------------------------------
This is an excellent piece of equipment. Top notch construction and fits like it was made to (the threaded holes are already present in the frame) Helps reduce flex and the finish is beatiful.

Shaun Griffith
06/11/2004
-----------------------------------
This is a very nice system, it installed easily, fit well and has a nice tone. The only thing i dont not like it it has a small raspy sound to it and when accelerating hard and letting off it backfires.

Naoki Chino
06/11/2004
-----------------------------------
I was expecting to get the hole exhaust system such as the down pipe. I`m very concerned the product is missing some parts. Please write me back. P.S the HKS exhaust were deliver on time but it had a miner dents.

William Nettles
06/11/2004
-----------------------------------
Very happy with the Skunk2 exhaust. The installation took about an hour with basic hand tools. I never noticed any significant power gains with it, but the sound is very nice, even with the baffle in.

Clint Elliott
06/11/2004
-----------------------------------
Extreamly easy to intall. Plug for the O2 sensor to gauge is large and hard to find a hole it will fit through in the fire wall. Other then that very straight forward install.

Dylan Nash
06/11/2004
-----------------------------------
Good flywheel, I like it. However the SPEC clutch I used with it popped a spring out of the hub within 5k miles and it wasn't even during a race.

Howard Beaney
06/11/2004
-----------------------------------
Doesnt leak any boost and sounds sweet.

Joseph Cira
06/11/2004
-----------------------------------

Aaron Edmister
06/11/2004
-----------------------------------
Very nice lip. Looks great on the car, I can't tell you how many compliments I recieve on this lip. Fittment is near perfect, I did have to line up and modify some of the mounting holes for it to fit perfect. Over all this is one of the best parts that I have purchased for my car.

Pascal Lague
06/11/2004
-----------------------------------
rev over 6000rpm is a lot easier

Pascal Lague
06/11/2004
-----------------------------------
Reving over 6000rpm is a lot easier

Matt Miller
06/11/2004
-----------------------------------
performed as expected...oem part

Matt Miller
06/11/2004
-----------------------------------
performed as expected... oem part.

Matt Miller
06/11/2004
-----------------------------------
After using the RPS pressure plate for the last 2 years... I am very pleased with the performance of the pressure plate.

Randy Panado
06/11/2004
-----------------------------------
Incredible fit and install was a breeze (35mins). Used all stock hangers. Love the sound and performance gains from it. Highly recommend and would NOT hesitate to buy again. The stainless steel build is a big PLUS. If you are looking for an excellent fit, build, performance, and sound, this is the exhaust for you.

Derek Billows
06/10/2004
-----------------------------------
good quality, cooling has improved.

Roger Tobias
06/10/2004
-----------------------------------
It is a very good part. You can do so much with your boost, but... It is very confusing manual with it. It almost has to many features.

Paul Sonnikson
06/10/2004
-----------------------------------

Marck Mulligan
06/10/2004
-----------------------------------
Very detailed instructions. Works much better and car idles better than removing the MAF honeycombs. Great product

Carlos Montes
06/10/2004
-----------------------------------
It works great. I could feal the diffrence right off the bat. I would give it a 10 but nothings perfect.

Christopher Crowdis
06/10/2004
-----------------------------------
came very will packaged. boltted right on thanks

LESTER RODULFO
06/10/2004
-----------------------------------
5 MINS. TO INSTALL AND TOTALLY GREAT SOUND

George Tsomos
06/10/2004
-----------------------------------

Greg Borschowa
06/10/2004
-----------------------------------
The AEM V2 performs great. Nice gains in HP and it sounds and looks great in the engine compartment. Quality of the product is easily a 10. Only reason for not rating it a 10 is because of the installation. Had to fabricate a part to secure the intake into place so that the filter would not rub against other engine parts. There was very little room for where the filter sits, but it was just enough. Some of the directions are vague, but spend enough time tinkering and it will work fine.

Ryan Gill
06/10/2004
-----------------------------------
I noticed a much deeper sound with the headers on as well as slightly more pick up in acceleration. Believe it or not, gas milage went up as well. It took me approx. 15 minutes to install this header, two pieces is the only way to go. The quatily of the headers couldn't be any nicer. Had them on my car 6 months and they still look brand new. I definately recommend these headers!!!

Todd Balfour
06/10/2004
-----------------------------------
i love this exhaust it sounds awsome looks great everyone i know loves it very easy to install it came with all the parts to make the install quick and easy and HPF had the lowest price i counld find very happy :)

Corey Isaac
06/10/2004
-----------------------------------
Amber, Your the best, I can't get over how fast you respond to my emails.

Chris OConnell
06/10/2004
-----------------------------------
noticed a nice torque and response upgrade, good overall upgrade. kinda wish i got lighter though but a good street flywheel

Chris OConnell
06/10/2004
-----------------------------------
good filter. lasts long. awesome quality. i deducted 1 point cuz one of the two brackets to hold it in place didnt fit for me. not a big deal cuz it only needs one.

Chris OConnell
06/10/2004
-----------------------------------
very nice exhaust look and sound. perfect fit and has a deep sound under light throttle and a lil higher pitch under WOT but sounds awesome!

Chris OConnell
06/10/2004
-----------------------------------
wires kept popping off of the suction part on the valve cover. not really a big deal but stopped after a while. ather than that, i have no complaints

Chris OConnell
06/10/2004
-----------------------------------
gets the job done. not as short as i thought but i actually like it like this

Chris OConnell
06/10/2004
-----------------------------------
great for track, pretty hard on bumps though. id only recomend these for the street if you have descent roads. but other than that, they are awesome quality and performance. will consider them for my s14

John Burton
06/10/2004
-----------------------------------
Awesome product! Installation is simple and the quality of the product is top notch. Power gains are not totally realized, but I made 987 RWHP and still a lot of tuning to go. But this thing is not for the "light hearted." It allows TOTAL control of the engine, and if you are not aware of the skills required to completely run EFI, you can get in over your head. The only suggestion to AEM on this product is to include a total instuction manaul on all functions of the EMS, not just the basic controls. ******* AEM has great online support! *********

Ramon Luna
06/10/2004
-----------------------------------
nice ride at any speed even with the light rear weight of a FWD, at the drag strip, slowing down quickly from 113 MPH is no longer scary. Rides nice and smooth on the freeway, but at the same time doesnt squat during launch. Well balanced shock!

Ramon Luna
06/10/2004
-----------------------------------
Inexpensive peace of mind, no more wondering if the 14 year old springs are worn. Its an upgrade at the cost of a stock replacement.

Ramon Luna
06/10/2004
-----------------------------------
Install was pretty easy, I can now fit 10 1/2 inch wide slicks, since these allowed me to remove the big ugly lower spring perch on the struts, They look great, are easy to adjust, and ride smooth like stock untill you push them hard at which point its like your on rails. I will be using Ground Controls on all my future cars.

Ramon Luna
06/10/2004
-----------------------------------
awesome ride, stiff when they need to be, smooth on the freeway.

John Burton
06/10/2004
-----------------------------------
The dual wideband is a nice product, but after purchase, I feel that a single wide band would have done the job. The tuning is easy with the use of this product, but getting assistance with AEM on warranty of bad parts is tough. One of the O2's was bad out of the box, and after going through multiple checks in the harness, sensor, and driver, it was determined that the sensor was bad. After contacting AEM through the web and by phone multiple times, they just kept giving me the "run around" and re-checking & re-checking the same thing over and over -- I just gave up and tuned using only 1 side. I was easy to install, simple to tune with, and the single circuit performed flawlessly.

Shane Redman
06/10/2004
-----------------------------------
Dislikes - one piece harness and guage, harness does not detatch from back of gauge making install more difficult than it needs to be. Also guage is hard to read in bright sunlight, or if there is any type of glare. Likes - Performs well, compact pod mountable display is great. Fits well, looks good. No regrets.

Jeff Collop
06/10/2004
-----------------------------------
Great fit and finish and outstanding price. I really like Titan and it was good seeing you guys at TX2K4.

Garrett Howard
06/10/2004
-----------------------------------
The quality of these bearings are of the highest standards. Excellent factory replacement.

Garrett Howard
06/10/2004
-----------------------------------
I machined the block and crank holders to get better bearing crush. Perfect tolerances. Works like a charm.

Matthew Hannon
06/10/2004
-----------------------------------

Matthew Hannon
06/10/2004
-----------------------------------

Matthew Hannon
06/10/2004
-----------------------------------
the part was ok but the instructions were in japanese, I CANT READ ASIAN!!!!

Matthew Hannon
06/10/2004
-----------------------------------

Matthew Hannon
06/10/2004
-----------------------------------

Eric Baranowski
06/10/2004
-----------------------------------
Everything worked as expected, another greater product from ARP

Douglas Neidig
06/10/2004
-----------------------------------

Douglas Neidig
06/10/2004
-----------------------------------

Douglas Neidig
06/10/2004
-----------------------------------

Douglas Neidig
06/10/2004
-----------------------------------

Douglas Neidig
06/10/2004
-----------------------------------

Douglas Neidig
06/10/2004
-----------------------------------

Brent Ludvigson
06/10/2004
-----------------------------------
Wow what an upgrade! For the price and a relatively simple installation process it is truly an amazing product! There is absolutely no comparison between the stock turbo and this one @ 15 psi. The car is "MUCH" faster and more rubber on the ground than the stock tires is a must. the only reason I would not give the kit a 10 is that some of the included nuts,bolts, hoses, and brackets are of poor or less than ideal fit. In all it is a small trade off for the overall value and performance.

Brad Helm
06/10/2004
-----------------------------------
Good quality but can scratch easily. A nice little horsepower gain from this set, and the engine bay really sharpens up in looks! Quite pleased with the purchase!

Brad Helm
06/10/2004
-----------------------------------
Good quality but can scratch easily. A nice little horsepower gain from this set, and the engine bay really sharpens up in looks! Quite pleased with the purchase!

Brad Helm
06/10/2004
-----------------------------------
A very nice product but noticed that the pulleys can scratch easily, so handle with care! Easy to install, nice little HP gain!

Cheng Thao
06/10/2004
-----------------------------------

Bob Westwater
06/10/2004
-----------------------------------
Geat turbo kit!!! The biggest bang for the buck turbo kit out there!!! You should have no problem making 650 rwhp on stock cams with this kit, mid to upper 700's with cams, intake, 4" down pipe, etc... Very streetable, drives around town in vacume like a Camry, and feels like a built big block on spray when the boost comes on. This turbo is great!!! Pulls really hard by 4,000 rpm in 4th gear.

Brad Helm
06/10/2004
-----------------------------------
Used in conjuntion with the APEXI-SAFC-II provided an excellent upgrade to my 87 toyota supra!

Brad Helm
06/10/2004
-----------------------------------
Wow! What a difference! I had 550cc injectors installed in my 87 turbo and used this computer to adjust the A/F ratio. After adjusting on the dyno, the car runs incredibly smooth and powerful!

Brad Helm
06/10/2004
-----------------------------------
Good quality! It was nice to replace the old stripping with the new!

Bob Westwater
06/10/2004
-----------------------------------
I love this intercooler!!! I picked up quite a bit of power by doing this modification. My car used to get heat soaked pretty easily with the stock sidemount intercooler, now it never gets heat soaked, and I have never had any radiator overheating problems. I think the straight / larger piping really helps with air flow. This intercooler is a must if you own a big single turbo Supra.

Manny Akim
06/10/2004
-----------------------------------
These are my favorite pads for the MK3 Supra, nothing compares to it. It brakes extremely well at 130mph, last pretty damn long. The only thing I hate about them is sqealing sound it makes sometimes. Other than that, I wouldn't settle for anything else but porterfield.

Manny Akim
06/10/2004
-----------------------------------
These brackets look damn good, and the quality is very nice. And of course installation is simple.

Manny Akim
06/10/2004
-----------------------------------
These clips are very easy to install and use. I have no compliants about them.

Rodrigo Torres
06/10/2004
-----------------------------------
It is a perfect bolt on, very easy to install, and the finish is one of the best. Defenitely the best radiator replacement.

Rodrigo Torres
06/10/2004
-----------------------------------
In my opinion, it is the BEST intercooler for the Supras. It is a perfect bolt when used with the stock twin turbo system and little modification is needed to the left side of the piping when going single turbo. My Supra runs harder with this intercooler and the quality is second to none. This is a must for any turbocharged Supra.

Rodrigo Torres
06/10/2004
-----------------------------------
The AEM intake system performs really well under high rpm and it was a perfect bolt part for my girlfriend's Honda Prelude. Defenitely one of the best out there and the quality is superior.

Bradley Coule Jr.
06/10/2004
-----------------------------------
They work just fine, no significant gain in performance was noticed. Installation was easy.

Jeremy Jackson
06/10/2004
-----------------------------------
This is a very good buy for anyone building a fast car. I was also very pleased with how fast it got to my house. It fit perfectly and will be buying more products from horsepower freaks in the future.

Scott Eagles
06/10/2004
-----------------------------------
I purchased this exhaust for my 97 civic DX because of an exhaust manifold that leaked. I had to get headers and complete exhaust. For the small amount of money I paid it was well worth it. For the Headers (OBX), highflow cat and the Apex World Sport Exhaust I only paid a couple hundred more than I would have paid just to replace the bad manifold. I notice increased gains during highway driving. The overall system is not too loud either... If you want everyone to turn their head or be heard a block away this exhaust is not for you... other than that the system is great...

Gregory Szitas
06/10/2004
-----------------------------------
i liked this part they look good and fit like oem with out any problems

Scott Neville
06/09/2004
-----------------------------------
best addition to the performane package that have done THANKS A BUNCH!!!!!!!!!!!!!

Brian Emerson
06/09/2004
-----------------------------------
instructions a bit shabby all else great

Michael Librande
06/09/2004
-----------------------------------

Michael Librande
06/09/2004
-----------------------------------

Michael Librande
06/09/2004
-----------------------------------

Michael Librande
06/09/2004
-----------------------------------

JT Granberry
06/09/2004
-----------------------------------
tremendous product highly rcommend it!!

JT Granberry
06/09/2004
-----------------------------------
I am still installing it the instruction manuals are not user friendly

John Kollarik
06/09/2004
-----------------------------------
looks really nice qwik shipment and fairly easy installation, only draw back is that i had to shave the inner edge of both fan housings to make it fit to the bolt pattern without overlapping, does run a little cooler, i dont see this thing ever leaking or breaking, for awesome looks good performance and great service i dont think you could go wrong

Aaron Miller
06/09/2004
-----------------------------------
The S-AFR was easy to install, and it's slim dimensions made finding a mounting place easy. It didn't work as expected though. It says it's a universal computer, but it wasn't compatable with the signal from my vehicle's Mass Air Flow (MAF) sensor. I have a '00 Pontiac Grand Am, which uses both a MAF and MAP sensor. The MAF uses a Hertz signal, while the MAP uses a voltage signal. I tried hooking it into the MAP signal and it seemed to work properly, but the service engine light came on. Also, my car uses the MAF for primary fuel enrichment calculations, so the HKS unit wasn't able to solve my fueling problems as expected. I sold it to someone with a car that it would work better on.

Niladri Basu
06/09/2004
-----------------------------------
Will purchase from again...

Niladri Basu
06/09/2004
-----------------------------------
Quick ship, great price, exactly what was expected.

Justin Infurna
06/09/2004
-----------------------------------
Bought two of these for my fuel system, very nice :)

Erich Moraga
06/09/2004
-----------------------------------
Super high accuracy where you need it the most.

Erich Moraga
06/09/2004
-----------------------------------
Strong, looks great, but kinda' noisy. You have to expect that in a high performance part though.

Erich Moraga
06/09/2004
-----------------------------------
It looks great and works like a champ.

Erich Moraga
06/09/2004
-----------------------------------
Very high quality. It is like a work of art, and obviously very important to your engine.

Jason Lepp
06/09/2004
-----------------------------------

Erich Moraga
06/09/2004
-----------------------------------
This thing is big and well built, perfect for high power, and priced incredibly low.

Erich Moraga
06/09/2004
-----------------------------------
Dresses up the car and adds performance. It's a win-win situation.

Erich Moraga
06/09/2004
-----------------------------------
Beautiful, fits great, and surpassed my expectations.

Erich Moraga
06/09/2004
-----------------------------------
Extremely high quality. If anything is wrong, Quaiffe will resolve things very quickly. They are a top notch company with a top quality product.

Erich Moraga
06/09/2004
-----------------------------------
I can't think of anything wrong with these pulleys. They are flawless, beautiful, and extremely light. They also come with the replacement belts you'll need.

Erich Moraga
06/09/2004
-----------------------------------
Incredibly cheap although I had to buy a set of mini o-rings and insulators since this didn't come with them. It probably didn't really need them, but I have better piece of mind knowing I have a tight seal now.

Ryan Agcaoili
06/09/2004
-----------------------------------
The radiator has and still is performing well. I had no problems with installation, easy bolt-on. Also, I have received many compliments for it on how it is a beatiful sight in the engine bay. Overall, I am VERY satisfied with the product. Thanks HPFREAKS! - Ryan

Randall Smith
06/09/2004
-----------------------------------
Product is great! I did not have the equipment to install it, so it was professionally installed. I have run the car very hard and raced, and the rotors have worked to my satisfaction. Thanks!

Randall Smith
06/09/2004
-----------------------------------
Product is great! I did not have the equipment to install it, so it was professionally installed. I have run the car very hard and raced, and the rotors have worked to my satisfaction. Thanks!

Brian Ludwig
06/09/2004
-----------------------------------
this works great, no problems with it so far

Doug MacIsaac
06/09/2004
-----------------------------------
Awesome piggy back. No flashy screen and works great on my mkiii

Brent Ludvigson
06/09/2004
-----------------------------------
The switch works great, just as advertised. The complaints that I have are 1)the kit was not complete- missing the connectors 2) the instillation instructions were not clear as to proper connections for the different ways the switch can be utilized. I had to connect the unit twice to get it to work the way I wanted it to.

Brett Todd
06/09/2004
-----------------------------------
The HKS Racing Type II BOV is the king of BOV'S. I have never had any problems what so ever with it while its been on the car. Not to mention the sick sound it produces. Its the perfect alternative for those who dont want to run dual BOV's. It will handle anything you can throw at it!

Brett Todd
06/09/2004
-----------------------------------
This has to be the best modification I have performed on my car. This kit comes with EVERYTHING needed for a complete install. The car still drives like stock, even when im running 30lbs of boost on race gas! You would never be able to tell, untill you get on the gas!

Frank Petaccia
06/09/2004
-----------------------------------
This wideband works very well, it reads within 1/10 of other more expensive widebands on the two diffrent dyno's that my cars been on.It was easy to install , and helps me dial in my maximum HP at the track .I'am satified with the quality as it has never given me any problems. The only things I'd change are a brighter day time display,(when the sun hits the display , you cant read it.)and make the display in a round shape so it fits in a pod for ease of mounting .

Brett Todd
06/09/2004
-----------------------------------
This is a great kit for those looking to make high horsepower. I have been running this kit for over 6 months no with no problems. Its one if not the highest quality complete fuel kit you can purchase for the supra! I would HIGHLY recommend this to anyone who is in need of a fuel system.

Garrett Jesmok
06/09/2004
-----------------------------------
These plugs are perfect for a BPU Supra. They also last longer than the NGK 6097s.

Brandon Whittington
06/09/2004
-----------------------------------
Easy install, works great, very happy with it!

Brendon Barnes
06/09/2004
-----------------------------------
product was a direct bolt on. along with the catback tis product was the single best mod that i could do to the car.

Major Lewis
06/09/2004
-----------------------------------

Ashley Mason
06/09/2004
-----------------------------------
This intake was not a simple install, it took me several hours, but was fairly straightforward. The car now pulls more strongly at lower revs, though there is a big but not unpleasent increase in noise over 6000rpm. Overall the quality is very good and I am very happy with the product and the results it has given in making my vehicle more drivable.

Vang Xiong
06/09/2004
-----------------------------------
installation was very simple and everything fit great. had to do a little adjusting to fit my set up but everything was a A+

Brian Kidd
06/09/2004
-----------------------------------
Hey Chris, Amber, Joe, and everyone else. I just want to reply directly back in that at this point it is next to impossible to rate any of the items other than looks :-) because although very close my project isn't quite done yet. Damn it's taking a long time :-), so I can't really give an honest opinion/rating yet. I know that my rating isn't the tipping point of how the business is but I just thought I would at least give a personal heads up on where I am at with all the products I've bought from Horsepowerfreaks. I will surely let you know as soon as the car gets back on the road. I can honestly tell you though that so far I have been more than happy with the products, price, and service that I have received from all of you and I look forward to doing more business hopefully in the not too distant from now. Thank you very much Brian Kidd

Alan Roth
06/09/2004
-----------------------------------
Solved vaccuum leaks and it looks GREAT!!

Don Esteban
06/09/2004
-----------------------------------
RC engineering injectors are a great upgrade for the toyota corolla ae86 years 83-87. i have had great success with these in the north american spec version, but for some strange reason they don't perform as well in the japanese spec 86's. these are highly recomended in the north american 86's. throttle response is sharp as the factory injectors and you can expect the engine to rev more eagerly as expected from a 4AGE. it makes you want to rev it hard!

Eric Pineda
06/09/2004
-----------------------------------
Excellent customer service, delivery was fast and quick. Would refer and would suggest doing business again.

John Formoso
06/09/2004
-----------------------------------
The HP+ works way better than the Axxis Ultimates that I have. For track purposes, these are perfect for me, no fades, just grip. Very good inital bite and does not eat up my rotors. Only reason I didn't give these a perfect score are the squeals when braking, specially after a few thousand miles of use.

AJ Biddles
06/09/2004
-----------------------------------
The BOV works great - the only complaint I have (and it is very minor) - is that the install of the retaining clip was really tough. I broke a pair of snap ring pliers trying to squeeze it enough to install it. Once it was in, it has worked flawlessly -AJ

Brian Ludwig
06/09/2004
-----------------------------------
it works good, but the sound is a little scrachy

Maiquen Saez
06/09/2004
-----------------------------------
Easy to install, the instructions was very helpful. The LED was kind of bulky but I hope that they come up with something more slim. It's great in conjuction with the EMS.

Maiquen Saez
06/09/2004
-----------------------------------
A very good product, gives out very accurate readings, easy to install.

Richard Sirokman
06/09/2004
-----------------------------------
These things stopped extremely well--including a couple of track days and several autocrosses. They squeal and dust a little bit, but other than that they were exactly what I wanted. Wish they made them for my 2001 Miata!

Maiquen Saez
06/09/2004
-----------------------------------
Good quality and dependable.

Maiquen Saez
06/09/2004
-----------------------------------
A very dependable pressure plate. I will recommend this plate to anyone.

Woodrow Gustafson
06/09/2004
-----------------------------------
The Glass lights are amazing, i get more compliments on those than any other part of my car. They fit perfect and look amazing.

Yamil Widy
06/09/2004
-----------------------------------
Nice and Clean.....

Maiquen Saez
06/09/2004
-----------------------------------
A very usefull upgrade, Since I intalled it I have a better clutch response.

Maiquen Saez
06/09/2004
-----------------------------------
This product was a class A product, very easy to install. All my expectation has been met by using this product. I recommend this product to all MKIV owners.

Brandon Hollyer
06/09/2004
-----------------------------------
My car seemed significantly stiffer with the addition of this brace. I already had a front STB and a rear STB, and I am very pleased. It's a very fine piece. Thank you.

John Smith
06/09/2004
-----------------------------------
Solid unit. Over 30 psi on my turbo with no spark issues and thats with the AEM EMS. Instructions were lacking but found them on the net. Pretty easy install if you can solder.

John Smith
06/09/2004
-----------------------------------
Solid construction. Works well.

John Smith
06/09/2004
-----------------------------------
SOLID! 650 RWHP on my Supra with hard launches. This tranny shifts like a beast.

John Smith
06/09/2004
-----------------------------------
Nice addition. Very high quality.

John Smith
06/09/2004
-----------------------------------
Nice polish and fit.

John Smith
06/09/2004
-----------------------------------
Great gauge with peak hold. Fits in the AC vent on a Supra.

John Smith
06/09/2004
-----------------------------------
Very nice. Perfect fit.

Tony Verduzco
06/09/2004
-----------------------------------
The product performed real good, installation was cake(easy). I had this exhaust for 6months now. The quality on exhaust is not all that good, but not bad. (where i live, my exhaust sees "speed bumps" like 1-2 times a week) So its mainly me doing the damage to the exhaust. Another thing about this is that the exhaust is way too quiet, but it sounds real good ;) If you want to have a conversation when you roll in your supz, and not get hassel by cops, its a great investment.

Jonathan Reinisch
06/09/2004
-----------------------------------
The stopping power is awesome! I would recommend this product to other vehicle owners as part of any basic performance enhancement to their vehicle.

Jonathan Reinisch
06/09/2004
-----------------------------------
The stopping power is awesome! I would recommend this product to other vehicle owners as part of any basic performance enhancement to their vehicle.

Brian Salazar
06/09/2004
-----------------------------------
The HKS dp fits like stock. While it's not a FULL 3" dp it performs way better than stock. If your in a bind with cash and need one asap it's not a bad choice. If I had to do it again (I might anyway)I'd save up more money and get a better one. The only other thing I don't like about it besides not being a full 3" is that it's aluminized steel not stainless.

Anthony Novello
06/09/2004
-----------------------------------
I love this product. Loud whistle on acceleration, deep exhaust noise gains, and more power on take off. I would definatly recommend this product!

Tri Nguyen
06/09/2004
-----------------------------------
the eibach springs that come with the ground controls were super stiff. i didn't care for the ride. the ride comfort would be 0. the looks were nice however. the parts were made with quality materials. when it's lowered, it draws tons of looks. for a show car, i would definitely recommend them as a good coilover setup. the height adjustment was pretty simple too. however, for every day drivers, i would strongly not recommend them.

Steve Olson
06/09/2004
-----------------------------------
i dont know if it was a product flaw or a machine shop error but the thing wobbles when the car is on

Steve Olson
06/09/2004
-----------------------------------

Justin Dennison
06/09/2004
-----------------------------------
Hardware was very easy to use, Pistons looked gorgeous, no flaws, installation was a breeze.

John Briggs
06/09/2004
-----------------------------------
Product not installed yet, but it is of utmost quality.

Carl Stevens
06/09/2004
-----------------------------------
Easy to install and sounds great. Excellent quality.

Libu Philip
06/09/2004
-----------------------------------
This is a great product, but there is a problem. The bar rubs on the exhaust manifold making a harsh vibration in the cabin of the car. Good build quality.

Brendan Feik
06/09/2004
-----------------------------------
awsome brake set up kept me out of... a couple accidents, cause im not a responsable driver(i tend to road rage). suggest this product to others im very impressed. my wheels are hard to clean and the powerslots help keep the brake dust im certain spots and not all over, clean exelent performance and great looks. i have recieved many compliments on the appereance. even my girl friend i glad i bought them.

Steve Moses
06/09/2004
-----------------------------------
I did not install since it would have voided my warranty from the machine shop that rebuilt my motor. so if you know anyone that needs one...

Steve Lemon
06/09/2004
-----------------------------------
this part was awesome, fit great, shipping was fast and quick and i got all my parts that was needed to install, the pulley was well worth the money...two thumbs up..

Jeffrey Carter
06/09/2004
-----------------------------------
The K&N is a must-have. Taking only 20 minutes to install, you gain so much for so little time and money. In my Supra Turbo, I noticed quicker turbo spool when used in conjunction with my aftermarket exhaust not to mention more power. Oh, and you've gotta love that you can now hear the spooling turbo and the whoosh of the diverter (blow-off) valve.

Jason Lepp
06/09/2004
-----------------------------------
Very nice sound, especially at higher RPM. It has a deep throaty response to it that lets others know you are "serious."

Jason Lepp
06/09/2004
-----------------------------------
Excellent craftsmanship as to be expected. Minor cutting, but that is to be expected.

Jason Lepp
06/09/2004
-----------------------------------
The only problem I had with this product was the recirculation tube was too long and had to be shortened. Other than that, it has a crisp sound and no leak. The SSQ was an easy install as well.

Greg Bielawski
06/09/2004
-----------------------------------
Excellent upgrade. Brakes stopped incredibly hard with these pads. I used them in conjunction with Brembo crossed driller rotors, Motul600 Dot brake fluid and Goodridge SS brakes lines. I feel that this is the best combo for a street driven, non road raced car without doing a major BBK upgrade.

Greg Bielawski
06/09/2004
-----------------------------------
Excellent upgrade. Brakes stopped incredibly hard with these pads. I used them in conjunction with Brembo crossed driller rotors, Motul600 Dot brake fluid and Goodridge SS brakes lines. I feel that this is the best combo for a street driven, non road raced car without doing a major BBK upgrade.

Sean Richardson
06/09/2004
-----------------------------------
This exhaust is AWESOME! It sounds awesome and the looks/performance are very good too. I have no complaints on this product, the installation was easy, everything just bolts right on. Couldn't be more happy with it! Also Horsepowerfreaks has the best price for it anywhere!!!

Richard Lang
06/09/2004
-----------------------------------
Normal installation process. As always, these Koni's work well and are easy to adjust. Compression is stiffer and appropriate for street/autocross. Rebound adjustments have adequate range for autocross use. Bearing mind that I have been autocrossing on street tires so far. Good choice for the price.

Jeanice Boddy
06/09/2004
-----------------------------------
well casted - but the casting flash still remained... I think it could have been finished to a higher polish....

David Capone
06/09/2004
-----------------------------------
The product was exactly what I had expected. Installation was very straight foward. The only thing is you must cut a small notch out of the plastic cover on both sides that cover the suspension in the rear to clear the bar. This is very easy to do. The carpet in the hatch covers the plastic part and you must make a small slit on both sides so the bar can be viewed. The installation was very easy as long as you have the proper tools. The carbon fiber on the bar looked absolutely amazing. I'm not sure how much this actually improved the handling of the car but it really looks awesome.

Raymond C. Koehne
06/09/2004
-----------------------------------
Great bargin works as advertized

Raymond C. Koehne
06/09/2004
-----------------------------------
Great bargin works as advertized

Raymond C. Koehne
06/09/2004
-----------------------------------
Shipped with scratches on it HPF took care of me. Problem was two bars shipped in the same box.

Raymond C. Koehne
06/09/2004
-----------------------------------
Exhaust did have a dent in it however it's fit, quality and performance were as expected

CLIFF CHRISTENSEN
06/09/2004
-----------------------------------
I use it everyday driving on the street and it works perfectly. It is amazing at the track as well.

Milo Whitson
06/09/2004
-----------------------------------
Another excellent product from Greddy. Great fit and finish. Somewhat easy install.

Milo Whitson
06/09/2004
-----------------------------------
AEM needs to come out with display for this product. Purchase through HPF was enjoyable as always. You guys are the best, keep up the great job! Milo

Kevin Slusser
06/09/2004
-----------------------------------

Kevin Slusser
06/09/2004
-----------------------------------

Kevin Slusser
06/09/2004
-----------------------------------
This is the best clutch disk I have ever run in my talon. It is very slippable and holds very well with no chatter, just like was promised. Excellent product, the last clutch I will ever buy.

Kevin Slusser
06/09/2004
-----------------------------------

Sean Thomassen
06/09/2004
-----------------------------------
very easy to install myself with maximum power gains giving my ride the extra boost it needed and looks awseume

Matthew Lerma
06/09/2004
-----------------------------------
direct drop in no modifications needed,no speed gain, no hp gain, holds plenty of coolant, cant really tell if car runs cooler or not good peace of mind knowing its good quality.

Justin Dennison
06/09/2004
-----------------------------------
Very nice product. Vehicle starts fast and runs smoother.

Justin Dennison
06/09/2004
-----------------------------------
Very nice product

Justin Dennison
06/09/2004
-----------------------------------
One of the Main Studs is way too long. It gets in the way of the Oil Pump. Had to shave it down about an inch.

Justin Dennison
06/09/2004
-----------------------------------
Very nice, only have 400 miles on the clutch. Engages and disengages smooth, and easy yet with hard clamping force. Excellent product.

Thomas A. Van Hoesen
06/09/2004
-----------------------------------
Looks good fits good and priced fair!

Thomas A. Van Hoesen
06/09/2004
-----------------------------------
Well looks great ! For some odd reason mine didn't fit well with my SP kit? They should offer choices on piping for different kits like HKS, RPS..etc... Wishful thinking knowing GReddy USA has terrible customer support so say the LEAST !

Thomas A. Van Hoesen
06/09/2004
-----------------------------------
HKS SS is my favorite so much so I use two. :-)They sound awesome work perfecto

Thomas A. Van Hoesen
06/09/2004
-----------------------------------
Install was simple can't comment yet as far as idle or power gains. I expect the same basic results most get head was ported and polished using these cams after careful research!

Thomas A. Van Hoesen
06/09/2004
-----------------------------------
SHP racing heads did the install and no-problems means worked well.

Kelly Gray
06/09/2004
-----------------------------------
I made it work. it fit for the most part. No part ever fits my car exactlly right. I like the greddy evo 2 and my friends have bought them too from seeing and driving my car!

Brian Salazar
06/09/2004
-----------------------------------
This is an awsome cat-back. The sound is exactly what I was looking for, quiet at idle and very aggressive at WOT. It's all stainless too, you can't beat that for the money. Total instal time was maybe 20min after the old system was off. Everything fit like it was supposed to. Grade A product!

Daniel Williamson
06/09/2004
-----------------------------------
THE PADS WORK GREAT, BUT THE SQUEAL IS AWFUL. TRIED EVERY TYPE OF SQUEAL STOP I CAN GET MY HANDS ON, BUT NOTHING LASTED MORE THAN A WEEK BEFORE THE SQUEAL CAME BACK. HOWEVER, THE PREFORMANCE IS MUCH BETTER THAN STOCK.

Mark Robinson
06/09/2004
-----------------------------------
Flawless piece!! works fine lasts along time!!

Mark Robinson
06/09/2004
-----------------------------------
Would have got a higher rating if there was more quality controle on the units shipped when it first was released. Should be an excellent product now!!!

LARRY BENTON
06/09/2004
-----------------------------------
Worked completely as described and fit well. Completely satisfied.

Bruce Jenkins
06/09/2004
-----------------------------------
Great looking light in the car crystal clear. It didn't break the bank. My only problem was with night driving the light projection is a little weak but other than that great part!

Bill Seymour
06/09/2004
-----------------------------------
excellent result. would purchase again.

Jack Natalini
06/09/2004
-----------------------------------
This piece is a little expensive but worth it. I have seen guys fabricate something similar with stuff from Home Depot at a tenth of the cost. As they say "you get what you pay for." I did have to relocate the a screw hole in the bottom of the box to force it forward enough for a Greddy hard pipe to clear. I had a tiny bit of trouble adapting cleanly to a VPC adapter I fabricated but I'm happy with it.

Eric Rogala
06/09/2004
-----------------------------------
Great kit. Super easy install, performs flawlessly. IMHO the best kit for the MKIV

Jim Howard
06/09/2004
-----------------------------------
I wanted an exhaust that would be on the quiet side but still offered the performance I was looking for. The HKS Hyper did not let me down. While driving normal I hardly notice it's there, but a down shift and pedal down changes everything, especially when the Vtec kicks in. It has a nice deep growl to it, not like most that sound like bees, or a leaf blower. I am currently running the Hyper exhaust with a 4-2-1 DC Sports header and an AEM cold air intake. There is a significant throttle response over the stock setup. The exhaust went on easy, but the hanger brackets seem too short, the exhaust tip would have been directly against the bumper had I not made plastic spacers to force into the hangers. With the spacers in the exhaust looks great on my car. This was the exhaust I was looking for,not too loud when driving easy, great sound when not. It looks great on the car as well. I have had many compliments on both.

David Skittlethorp
06/09/2004
-----------------------------------
This is a great, cost-effective intercooler that has exceeded my expectations in cooling capacity and resistance to heat soak.

Stephen Potts
06/09/2004
-----------------------------------
the performance of this product is phenomenal. it gave me much more low end plus a mean growl whenever i step on the gas. the install was easy and well documented. tolerances are very close w/ the clutch linkage but i'd expect nothing else than that from AEM. this has gotten a big thumbs up from me. can't wait to couple this with a header and full exhaust to see what it really can do.

Fue Yang
06/09/2004
-----------------------------------
very good intake system. best system out there. noticeable power gains.

Fue Yang
06/09/2004
-----------------------------------
product is great. simple install. good power gains. quiet exhaust, especially with silencer almost like stock.

Andrew Doherty
06/09/2004
-----------------------------------
This product is VERY advanced and probably has more features on it than I would know how to use but its always good to know they are there if I want to use them in the future & more imoprtantly "at no extra cost". The AEM EMS was easy to fit in the car but the tuning is another story all together!! the only negative I have is that I feel AEM should provide the unit with a MUCH better choice of base MAPs as the one supplied gets the car running but only just. All in all an excellent product sold by a supplier that in my opinion has loads on time for its customers, big thanks to Chris & Sean.

Cory Nicolai
06/09/2004
-----------------------------------
work great no problems with them at all

Cory Nicolai
06/09/2004
-----------------------------------
they are ok, had some problems with the sensors coming loose

Cory Nicolai
06/09/2004
-----------------------------------
works great and performs flawlessly. keeps the car nice and cool, and i would suggest it to anyone with an eclipse

Cory Nicolai
06/09/2004
-----------------------------------
the part helped very much in tuning the car, but as we had the part about every 6 months we had to replace the sensor, because it wasn't reading properly anymore. costly upkeep, but great performance

Omar Pabon
06/08/2004
-----------------------------------
It is a great exhaust my car breathes out very well and sounds great

Jason Hurlbert
06/08/2004
-----------------------------------
I put this in my 87 Supra Turbo. All the functions work except the RPM function is way off. Works awesome other than that, ez install

Raymond Nambar
06/08/2004
-----------------------------------
other than not having the GReddy logo on the exhaust, everything is perfect

David Pritchard
06/08/2004
-----------------------------------
The main thing I liked about the muffler is the consertative look. Looks like stock. The sound is very good and not buzzy. Not sure how well product performed. Horsepower gain was probably minimal. Install was easy. Breaker bar is helpful for b-pipe to cat bolts.

John Kalfayan
06/08/2004
-----------------------------------
This radiator solved all my overheating problems. Can't believe how much of a difference it made! I can now take my car to speeds I have never taken it before and not worry about it overheating. Great product and will always recommend Fluidyne!

Roman Tikhonov
06/08/2004
-----------------------------------
Awesome shipping , super fast ! Great product , love MSD clips , holds very good on the plugs and no missing fire like it used to happen with my old fires thank you horsepowerfreaks , A++

Shawn Fonseca
06/08/2004
-----------------------------------
Great part works well for great stoping power what more can i say i got what i wanted

Chris Lambert
06/08/2004
-----------------------------------
Easy install, decent performance, but nothing amazing. They were the more "street" worthy pads and really I didnt notice anything amazing from them. Dust isnt all too bad, much better than autozone brand pads, and noise is non-existant from them while braking.

Tim Steck
06/08/2004
-----------------------------------
Works great with the FJO wideband kit but it would be nice if the cable was a little longer. Installation was easy. It sure showed me that I was very rich at WOT, but that has been resolved! The car runs great now!

Jason Crain
06/08/2004
-----------------------------------
This product has been great, but when purchased, I was never told that I also needed a splice kit. That was a little disappointing. Thanks

Tim Steck
06/08/2004
-----------------------------------
The FJO wideband kit was easy to install and works great with the gauge. But I wish the switch from data logging and displaying on the gauge would be automatic. You must set an option before exiting the logging software to use the gauge or you will not get a display on gauge ... a pain but easy to do if you remember. It would be better if the gauge display and data logging would both work at the same time. When you are logging your results the gauge doesn't work so you have no clue what the O2 reading are, unless you look at your computer screen while you are driving / racing - not a good idea. Also the logging software doesn't give you an option to export your results to a spreadsheet or any type of file so you can only see your results on a 2-D or 3-D graph. I would like to see an option to download / export results to a file. Even though I feel there could be a few enhancements to make the product better I love it and wouldn't trade it for the world. If you are serious about performance it is a MUST.

Eric Vaden
06/08/2004
-----------------------------------
The cold air intake installed performs great. I only had one problem with this product and that was during installation. I had to distort the air filter slightly to have it fit in the designated area in the engine compartment. If this was made specifically for my car, why didn't it fit like a glove? Anyway, it works wonderfully and I don't have any real complaints.

Ramon Luna
06/08/2004
-----------------------------------
Good value, nice quality, machine shop noted that the springs had 10 pounds more pressure than stock, spinning 8300 rpm's at 10 PSI boost without a hint of valve float. Cheap insurance from a trusted name.

Cody Stieg
06/08/2004
-----------------------------------
The springs are good they are not to stiff and have almost no body roll. the ride is nice but I give most of that credit to the KYB AGX shocks I used

Terry Richardson
06/08/2004
-----------------------------------
Springs appeared good quality visually, cut and fabrication very good. Excellent fit into factory struts and towers, drop was as advertised, perform well in corners, quiet. Rears are sagging .3-.5" lower than front after 3,500 miles, and right front is .5" lower than left front. All new KYB G2 were installed at same time.

Aaron Kline
06/08/2004
-----------------------------------
Just about as good as the old TRD brake pads. Great combo with Braided lines, and some powerslots!

Aaron Kline
06/08/2004
-----------------------------------
Powerslot have always been awesome stock replacement rotors... wouldn't look to anything else.

Jeffrey Okuna
06/08/2004
-----------------------------------
excellent quality, product arrived just as expected (in excellent new condition w/out damage) Works better then expected, overall... satisfied.

Jason Garrison
06/08/2004
-----------------------------------
There weren't any problems during the install of the gears, but after about a hundred miles it all went bad. It turns out that Skunk uses cheap chrome plated bolts in the gears, and two of the intake and four of the exhaust side bolts were broke. But, I just went to the fastener store bought some grade 8 (a step I would recommend) and all has done well since. It only takes about five dollars to put in new bolts, do that first and they are great.

Mark Rescober
06/08/2004
-----------------------------------
works perfect, easy install!!!!

Mark Rescober
06/08/2004
-----------------------------------
good product

Eric Bohn
06/08/2004
-----------------------------------
Quick and easy install. Came with all part nessisary. Had it on within 30 min. Nice deep sound. Recommend not using the silencer as it just didnt' sound as nice when on the throttle, but if you have to use it where you live, ya gotta do what ya gotta do you know.

Tommy Salazar
06/08/2004
-----------------------------------
works great would buy from them again.

Michael Grablick
06/08/2004
-----------------------------------
Best sounding Blow off valve on the market.

Corey Parrish
06/08/2004
-----------------------------------
I would rate the product, but my engine blew up before I was able to put it in, and I had to trade it for an ecu. I will buy from your site again, for other parts

Brent Ackermann
06/08/2004
-----------------------------------
HPF deliver's what you would expect. The SSQV mounted on a small 2.25"Diamter * 16" pipe. If you're not planning on getting an upgraded IC with pipes, then this part is for you! If you are, then best spend your money on something else; although the BOV comes off easily with the C-Ring removed you would end up paying less just getting the flange and valve. Grade A product, only wish it came on a 2.5" pipe..and I completely understand that it's meant to be a PLUG AND PLAY unit. Thanks Joe. -Brent

Ben Howe
06/08/2004
-----------------------------------
I checked the timing with a degree wheel and a new timign belt before and after. The 0 mark is right on.

Christopher OConner
06/08/2004
-----------------------------------
Routing the wiring harness is the biggest challenge. The harness is hardwired to the back of the gauge, and the O2 leads can not be cut. The trim around the gauge is thicker than My other Autometer gauges, but it is still a very nice piece. My gauge was faulty when 1st delivered, but AEM repaired it and returned it to me next day air. I diod have one of the 1st shipments of gauges. Even so, I still would reccomend the unit. If your vehicle is tuned in an AF range below 11:1,the display will not read that rich of an AF.

Peter Kachadurian
06/08/2004
-----------------------------------
Brake pads are great, they grap and are pretty much fad free. The only thing is they tend to make noise sometimes but I expected that because of their performance application.

Mark Eizenhafer
06/08/2004
-----------------------------------
The flywheel did wonders for my time and acceleration,I gained a 1/2 second on my time at the track its well worth the money

Gary Zonca
06/08/2004
-----------------------------------
Great mod, easy to install once trans is down. Improved rev response. Only problem was after it was installed everytime I started my car there was this noise. Ended up taking that starter out again and greasing the flywheel gear part, it took care of the problem. Good product!!

Michael Yancovitz
06/08/2004
-----------------------------------
I give this a 10 for the time being. Product is great. Every body tunning, should have one. Why I give it a 10 for the time being is due to the fact that EVERY(EMS, cDi box) other piece of AEM gear had to be returned for problems that came from the factory. Right now the wide band works great. I am keeping my fingers crossed. Later.

Justin Trudeau
06/08/2004
-----------------------------------
The CAI performs very well, it's givin my V a little more power though not a whole lot but just enough to give it that extra power for quicker acceleration for hwy. merging!My only gripe is that since my V is a automatic at low powerband acceleration it kind of lags,but when you kick it to about 4000 rpm you definatly notice the extra power plus it give's a nice throaty growl! Installation was pretty easy it only took about an hour and a half,and it made so much more room in the engine compartment after I put it place of the old stock intake which makes working on the car so much easier!I purchased it about 6 months ago and and know problems yet! And the quality of the product is first rate! I highly recommend this product

Leonard Grossmann
06/08/2004
-----------------------------------
I love it!

Leonard Grossmann
06/08/2004
-----------------------------------

Leonard Grossmann
06/08/2004
-----------------------------------

Leonard Grossmann
06/08/2004
-----------------------------------

Leonard Grossmann
06/08/2004
-----------------------------------
The Blitz sideskirts were on backorder but I was kept well informed on when they were going to arrive.

Michel Fortier
06/08/2004
-----------------------------------
Seemed to work ok. I did not use with the AEM ECU but rather a datalogit. A linear output of 0-5V would have been very helpful. I originally heard the AEM used a linear output which tuned out not to be true. For the money it's quite good however, and very small. A LED on the control box would be helpful to know that the unit is powered and functioning within designed parameters. Fairly easy to install and can use a wide voltage range which is nice. Connectors are top quality as is the whole product. Is not currenlty working, probably due to my own fault.

Ron Ingram
06/08/2004
-----------------------------------
the price was a little high but the service was good and the product works well thank's

Curtis Chen
06/08/2004
-----------------------------------
great bite, best pads i've tried so far

Robert Bruzzesed
06/08/2004
-----------------------------------
Part I order was just what I ordered. Perfect condition and great price. Just wondering if you could send white decals. Thanks.

Bryan Ward
06/08/2004
-----------------------------------
great modification for the money!

John Young
06/08/2004
-----------------------------------
This exhaust was great. It replaced an old HKS catback that was of lesser quality that rusted through. That was a nice 600 dollar mistake.. The N1 is very deep, has a great sound but isnt terribly loud.. Then again. I have a open to the atmosphere ext HKS Wastegate, so loud for me is a bit extreme. The store, horsepowerfreaks were very professional, great on delivery time, all in all, great service. I look forward to buying more from this store for my talon or wrx.

Peter Palamara
06/08/2004
-----------------------------------
Starting to warp a bit :(

Peter Palamara
06/08/2004
-----------------------------------

Peter Palamara
06/08/2004
-----------------------------------

Peter Palamara
06/08/2004
-----------------------------------

Peter Palamara
06/08/2004
-----------------------------------

Peter Palamara
06/08/2004
-----------------------------------

Steve Benes
06/08/2004
-----------------------------------
They don't offer a kit for my exact car, so I took the closest fit possible and made it work. The install was still pretty easy and the engine bay looked great.

Robert Ruggiero
06/08/2004
-----------------------------------
Not much of a power gain,slight increase in throttle response,difficult to install some sanding of keyway and water pump pulley required for proper fitment. Above average quality.

Garrett Jesmok
06/08/2004
-----------------------------------
Product was not professionally cut and made. The metal and rubber components were roughly cut and not smooth at all. Install and K@N filter were good. I would expect much better quality from the other components for the amount of money spent :(

Justin Satoutah
06/08/2004
-----------------------------------
This product seems to be working fine so far. I had it installed at a performance shop in Fremont, CA. The vehicle did not seem to run faster with the cold air intake alone, instead, the exhaust gave the car more power. Once again, so far, the product's quality is holding up and hopefully it will continue to last.

John Monnin
06/08/2004
-----------------------------------
If you are driving your 3S on the street these lower spring rate springs are highly recommened. The ride is still VERY stiff but the stock HA springs are brutal. I sold thes springs to a buddy who road races alot and he loved them. He said identicle track performance and much more streetable. Make sure you get lower rate springs for both front and back.

John Monnin
06/08/2004
-----------------------------------
If you are driving your 3S on the street these lower spring rate springs are highly recommened. The ride is still VERY stiff but the stock HA springs are brutal. I sold thes springs to a buddy who road races alot and he loved them. He said identicle track performance and much more streetable. Make sure you get lower rate springs for both front and back.

Christin Browning
06/08/2004
-----------------------------------
Easy to install. definite improvement. Just what I expected.

Nick Reiser
06/08/2004
-----------------------------------
Very quick revs! Complements my JDK Short shifter very well! Very Recommended!

Leah "Steve" Traglio
06/08/2004
-----------------------------------
service was great, part lacked some functions that i needed, but as of yet on one unit has all i need..

Daniel Snider
06/08/2004
-----------------------------------
great, one of the best mods I have done.

Grady Yonce
06/08/2004
-----------------------------------
good product, does what i need it to. fairly easy to setup and use. good value

Daniel Snider
06/08/2004
-----------------------------------
its ok, we had some problems with it in the beginning but they have seemed to work themselves out.

Thomas Stauber
06/08/2004
-----------------------------------
Great Look, Great Sound, kind of drones a little on the highway but any exhaust will do it to you.

Matthew Mullen
06/08/2004
-----------------------------------
This was a very simple 5 minute bolt on. It really increased chassis rigidity in the front end. The tech staff was very quick via e-mail in responding to my questions regarding this product. I would highly recommend this tie bar to anyone looking to increase their vehicle's handling capabilities.

Thomas Stauber
06/08/2004
-----------------------------------
The EBC works pretty well, but I had to mess with it for quite a bit before I figured out what was going on. It didn't help that I had no one to use as a point of reference since I was one of the first owners.

Matthew Mullen
06/08/2004
-----------------------------------
This was a very simple 5 minute bolt on. It really increased chassis rigidity in the rear end. The tech staff was very quick via e-mail in responding to my questions regarding this product. I would highly recommend this tie bar to anyone looking to increase their vehicle's handling capabilities.

Joshua Updike
06/08/2004
-----------------------------------

Connie Ellis
06/08/2004
-----------------------------------
Nothing all too exciting about a new airfilter for my existing intake, but i was very happy with my purchase. The only thing i think is worth mentioning is that the original filter that came with the intake didn't have a lip on the inside of the neck. The original filter left some scuff marks higher up on the intake tube and the new filter didnt cover it. It was just cosmetic! Great company with great products!

Rick Ramsey
06/08/2004
-----------------------------------
The product worked as described, delivery was timely, sales staff was knowledgable and friendly. I would not hesitate to make future purchases.

Emanuel Hajek
06/08/2004
-----------------------------------
It was a great peace, fit was really nice, and it looked great on the car.

Walter Gomulka
06/08/2004
-----------------------------------
great quality,not bad on price,car is gonna do 10's....

David Zeiler
06/08/2004
-----------------------------------
I installed it myself. Love the look and the sound I have had a HKS exhaust before infact I sold it to buy this over 8 years old and still going strong

Manny Akim
06/08/2004
-----------------------------------
I love TEIN coilovers. TEIN coilovers are more of what your taste of driving is. Some like it stiff, some like it soft. I love it stiff and these do the job. Best thing about them is, it's not that expensive compared JIC's. Installation is not that bad either, it may be time consuming but it's worth it.

Kelly Moore
06/08/2004
-----------------------------------
Igive you guys an A+++, shipping was quick. The part fit flawlessly, It will jerk a knot in your neck.

M. Craig Allen
06/08/2004
-----------------------------------
It was a great quality package for a lug nut set. I was impressed with the light weight and professional quality construction. If your wheels have the lug nuts exposed, these are the ones to get as they are clean and show well.

Manny Akim
06/08/2004
-----------------------------------
One of the best RAD hoses available other than the aluminum pipe. This product is better, reason being is because you can burp the system by squeezing the RAD hose instead of waiting for the system to burp itself over time. It's very easy to install and looks nice with my Fluidyne RAD.

Devon Williams
06/08/2004
-----------------------------------
This Injen ram intake was installed a while now and there were nothing but positive effects on the car. It takes of faster and and the it sounds like POWER! Great Product!

Manny Akim
06/08/2004
-----------------------------------
These brakes pads are pretty good and stop on a dime (not literally, but you know what I mean). I use my eclipse daily and I'm a very hard braker. These pads are still holding and I haven't had any probs stopping with them.

Manny Akim
06/08/2004
-----------------------------------
These brakes pads are pretty good and stop on a dime (not literally, but you know what I mean). I use my eclipse daily and I'm a very hard braker. These pads are still holding and I haven't had any probs stopping with them.

Manny Akim
06/08/2004
-----------------------------------
Once again, Greddy has done it. This oil cooler is top notch construction, the quality is superb and looks SWEET. Installation is pretty simple. I wish they made this kit for my other car, but oh well.

Nicklous Snyder
06/08/2004
-----------------------------------
Turbo was a direct bolt on and works great.

Manny Akim
06/08/2004
-----------------------------------
Had an over heating problem with my car when boosting in the summer. This RAD made my car run much, much cooler. It looks great, welds are pretty good, polished aluminum is nice and shiny. It's also very easy to install and gives the engine bay is nice little touch of bling bling.

Andy Kim
06/08/2004
-----------------------------------
Horsepowerfreaks shipped the fuel pulsation dampener bypass immediatelly and I received it within a few days. The installation is very easy and straightforward and performed very well(No leaks) I recommend this product to any supra owner, and it is very convenient to replace the fuel filter at the same time. So if you have a dirty fuel filter might as well purchase the dampener bypass along with the new filter.

Jason Binch
06/08/2004
-----------------------------------
The Autometer Colbolt gauge looks nice and functions as intended, but for me the light in the gauge is too bright; way brighter than my Apex'i gauges.

Manny Akim
06/08/2004
-----------------------------------
Good quality and looks good too. Easy to install and way, way better than the stock fuel rail.

Simon Lee
06/08/2004
-----------------------------------
The problem with this kit is that it's designed for the right-hand drive Supra. The mounting kit doesn't work on the US spec Supra's so I haven't been able to use it at all.

Scott MacDonald
06/08/2004
-----------------------------------
this flywheel spins much faster, but does not hinder slow speed engagements.

Manny Akim
06/08/2004
-----------------------------------
This is the best in-line filter for any fuel pump when using SS lines. I use it in all my cars.

Manny Akim
06/08/2004
-----------------------------------
This is the mostly used adjustable fuel pressure regulator, it no wonder I purchased it. Works wonders, and easy to install.

Scott MacDonald
06/08/2004
-----------------------------------
T

Manny Akim
06/08/2004
-----------------------------------
Greddy injectors are one of the best I ever used and affordable. These are direct drop-in with no modifications what so ever.

Manny Akim
06/08/2004
-----------------------------------
One of the most used fuel pumps to date. Cheap, affordable and gets the job done.

Manny Akim
06/08/2004
-----------------------------------
These are one of the best carpets available for any sport car. Best thing about them is, they match most interiors. Material is pretty good and last long.

Manny Akim
06/08/2004
-----------------------------------
I went through other injectors that had problems with. After purchasing these 660cc injectors from HPF, I was really satisfied with the qualitd and ease of installation. These work perfect with my setup, it was the last thing I needed to make 524RWHP SAE on my 7M. Thanks HPF.

Toa Thao
06/08/2004
-----------------------------------
Excellent exhaust. Everything was better than I expected. Only thing I didn't like was the price. It was exspensive compared the the HKS version.

Ryan Arnold
06/08/2004
-----------------------------------
maybe have better descrition of the product when i bought it i thought it was a short ram intake all it was was an elbow part worked well but just didnt get what i thought it was.

Travis Cox
06/08/2004
-----------------------------------
Exhaust sounds great and is a must have for a force-induction car.

Nam Nguyen
06/08/2004
-----------------------------------
This product worked as advertised. It took out about 85% of the chassis flex when the roof is off. It also made the frame feel more stiff when the roof is on. This is, by far, the best suspension mod that I've done to the car but at a hefty price, it is the hardest and most time consuming mod that I installed. It required a lot of shaving and cutting and pounding to install the bar. Well worth it. HPF has good prices and the order process was quick and easy. The staff at HPF were very helpful.

Brandon Rushing
06/08/2004
-----------------------------------
I bought the kit for my '94 Supra when I still had the stock twins and it fit well. Nothing needed to be cut/bent to get it to fit. Just bolted right up. I went single and I welded I got it welded onto the intercooler pipe right under the drivers-side turning signal and it's LOUD. I'm about to change turbo's and install a fuel system and I'll be hooking up a second SSQV to accomodate the extra boost.

Brandon Rushing
06/08/2004
-----------------------------------
This is the best *budget* cat-back available for the Supra, in my opinion. It's got a deep tone to it but it screams at wide-open-throttle. It's a fairly loud exhaust but it comes with a silencer if you need to quiet it down. I personally bought some 3.5" exhaust piping and replaced the resonator in the middle of the exhaust with a straight pipe and it made the exhaust sound even deeper and a tad louder.

Koua Her
06/08/2004
-----------------------------------
good clutch....it holds power well. koua

Scott Mclean
06/08/2004
-----------------------------------
I think its safe to assume that everybody knows B&M shifters are the best for DSMs. They even supplied me with a replacement part when a screw broke in mine due myself not using Loctite like I should

Brandon Rushing
06/08/2004
-----------------------------------
The RMM looks great. If you cut off the *wings* on the side of the lip, it looks even better. It was easy to install(took me about 20-30 minutes to take off the stock lip and put this one on) and I get compliments on this and the Euro-scoop all the time.

Scott Knisely
06/08/2004
-----------------------------------
since sean tuned my car using the aem ems and the aem map sensor, its never ran better.

David Harris
06/08/2004
-----------------------------------
It was for my EMS box so it worked as required...

Scott Mclean
06/08/2004
-----------------------------------
This is an excellent product and Ive had no complaints since I bought it. The only thing I would recommend, is that either they drop the price down a bit, or include a matching SPAL fan already mounted to it like C&R racing , which sells theirs for $500; about the same price as the Fluidyne.

Austin Hsu
06/08/2004
-----------------------------------
My friend and I installed this on a 2002 RSX Type S (his car, I bought the BOV). We installed it in conjunction to the Greddy Bolt-on Turbo kit and an HKS SSQV (super sequential I believe it's called). It was so, so easy to install this flange. I highly recommend it. I would give it a 10, but I haven't personally installed it in other applications.

Brandon Rushing
06/08/2004
-----------------------------------
I got this thing in mail in a few days ...typical HPF fashion. Once I got it, I brought it straight to a painter and the labor for the scoop and a RMM lip to get painted was only $100. The install wasn't hard, it just took guts. The first drill into the hood is quite nerve-racking, but once the mental aspect has blown over, it's a breeze to install for anyone that has mediocre talent with a grinder. Now that it's installed, I get compliments on it all the time. When I mention getting an aftermarket hood most people tell me to just leave the one I have on because it looks GREAT!

Aaron Linhares
06/08/2004
-----------------------------------

Duane Dahl
06/08/2004
-----------------------------------

Duane Dahl
06/08/2004
-----------------------------------

Eric Spears
06/08/2004
-----------------------------------
The product is great. I love it, and the quality of service with horsepower freaks was awesome, but when getting one of the two mufflers I received from skunk2 it had one side totally destroyed. I talked to skunk2 about it and they sent me another one. It was the wrong one. And again had to send it back. It took more than a month and a half to get the problem resolved. I will not buy anything else from skunk2 ever again. They totally suck!!!! I will only deal with horsepowerfreaks. They have great service and move promply with their customers. Thank you very much for horsepowerfreaks, NO THANKS to skunk2 !!!!

Luis Dimagiba
06/08/2004
-----------------------------------
This product is awesome. It removed the speed limiter on my car. Quality is better than expected.

George Dayton
06/08/2004
-----------------------------------
420 whp, thanx

Kyle Reeves
06/08/2004
-----------------------------------
Great Prooduct Worth the money and headache of installing.

Kyle Reeves
06/08/2004
-----------------------------------
Great Product Easy Install

Hernando Abdu
06/08/2004
-----------------------------------

Dan Smith
06/08/2004
-----------------------------------
very competitive price

Jason Eaker
06/08/2004
-----------------------------------
craftmanship is top notch and it is very accurate!

Jason Harrison
06/08/2004
-----------------------------------
Product was perfect, and performed as advetised. Service was excellent.

Scott Laird
06/08/2004
-----------------------------------
works just fine. although it's only a steering wheel. but looks nice. http://f1.pg.photos.yahoo.com/ph/v8s_are_slow/album?.tok=phWcgLBBGfBI.GVf&.dir=/talon&.src=ph

Jesse Fink
06/08/2004
-----------------------------------
great product came just as expected in great time

Rusty Moore
06/08/2004
-----------------------------------
Easy to install and it has been feeding my RB25DET for months now without any problems.

Rusty Moore
06/08/2004
-----------------------------------
My only problem is that it reads in kmh instead of mph. It was easy to install, and had instructions for my RB25DET, which is nice since it was never available in the US.

Rusty Moore
06/08/2004
-----------------------------------
The quality is excellent. Installed with ease.

Thomas Fink
06/08/2004
-----------------------------------
good product. easy swap with OEM. Best application when matched with Porterfield kevlar/carbon performance pads. The rotors are well machined and reasonably well balanced. A great investment for those on a budget and needing braking improvements. Heat transfer appears to be good so far without much fading and no glazing or warpage under moderate track use.

Mike Padowski
06/08/2004
-----------------------------------
This rear STB is very thick and strong, looks good and does not cost a lot. The only beef I had with it was that the two ends of the bar did not line up perfectly with the mounts, thus requiring some force to install. The targa top still stows away nicely in its trunk storage location. Great overall deal in my opinion.

Thomas Fink
06/08/2004
-----------------------------------
good looking, custom fit like a glove. Performance is good and so far no ignition miss due to late spark at cyl. at 7000 rpm.

Alvaro Patino
06/08/2004
-----------------------------------
AEM Short Ram Intake did what it said it would! Noticed the HP gain, and the Sweet Sound! Took about 30 Minutes to Install. One of the Best Mods out there for the money!

Thomas Fink
06/08/2004
-----------------------------------
quality precision machined. Easy installation and a real kick in the pants for quicker rpm and launch for racing applications. Not great for stop and go street driving due to the need for higher rpms to engage clutch, car tends to launch quicker. Excellent combination of matched parts when used with ACT pro clutch set-up.

Shane Walker
06/08/2004
-----------------------------------
The pads seem to work good even at high speeds. The only dislike is the fact that they sometimes squeel after they heat up.

Bohdan Cranick
06/08/2004
-----------------------------------
It was a really good shopping experience, you made life easy and I will definetly shop with you again considering nobody else could beat the deal. Thank you

Mike Padowski
06/08/2004
-----------------------------------
The quality, engineering and craftsmanship of this piece is excellent. The reason I rate this BOV a 7 out of 10 is because this piece did not perform well on my specific application, and probably won't perform well on most applications. This BOV is meant for race cars running huge boost numbers, not for an average boosted street car. The BOV is adjustable but on my Supra runnig 20psi of boost it was impossible to find a happy medium between boost leak (BOV set too lose) and compressor surge (BOV set to tight). I'm sure it would do its job perfectly on a car that needs a BOV like this one, but I would not recomend it for daily driving. In case anyone is wondering I bought the low boost version and installed the BOV 1.5 feet away from the compressor outlet. I ran a vaccum line from the compressor outlet to the bottom nipple, and one from the intake manifold to the top nipple.

Thomas Fink
06/08/2004
-----------------------------------
quality machined product, percision fit on crank and other bolt on applications. Easy to install with engine on a stand and belt alignment perfect. Seems to get the job done, but hard to tell the incremental hp gains, yet seems to help with rpm tacking up more quickly

Thomas Fink
06/08/2004
-----------------------------------
excellent spring, especially when used with the suspension tech sway bay set. good street ride with huge improvements in the high speed cornering due to the progressive spring nature. Very easy to install and a drop in with stock/OEM struts or with upgrades.

Joshua Hughes
06/08/2004
-----------------------------------
No issues whatsoever - product performed exactly as advertised with a "kit" which was 100% compatible with the S2000

Thomas Fink
06/08/2004
-----------------------------------
really helps the handling and cornering. great product to use with the suspension tech pro springs. Makes the whole under carriage tighter than your girlfriends backside. A little difficult to install the rear bar, but a big hammer and a few prybars got the job done. Front just dropped in and bolted up.

Jason Hoppe
06/08/2004
-----------------------------------
The gauge is very accurate. I can't tell how many times my other gauge read that it was ok only to find out it wasn't. It was very easy to install. Heck you only had to click wire harnesses together to get it to work. I would definetly recommend this to everyone.

Thomas Fink
06/08/2004
-----------------------------------
bingo...small investment for much improved braking capability. Good on heat transfer under hard braking conditions. Great performance option for those who don't really need the $3000 large diameter rotors and fancy colored calipers

Doug MacIsaac
06/08/2004
-----------------------------------
Alright filter. Couldn't tell if it did anything cause I put it on my car along with a turbo.

Thomas Fink
06/08/2004
-----------------------------------
dropped right in. Radiator hose inlet and outlet diameters are 3/16 smaller than the block and waterpump diameters. Required a reducer spacer and custom hoses to fit it all up. Engine runs at peak rpm for long durations with plus or minus 10 degrees over thermostat of 180. Minimal electric fan cooling on time required. Forced airflow is excellent during driving condition.

Beau Fenske
06/08/2004
-----------------------------------
Chattered and had relatively harsh engagement for about 1,500 miles after installation. It is much less grabby now when starting out from a stop (daily driving) and it has held 560 rwtq on the dyno so far. So far so good.

Giles Gilbert
06/08/2004
-----------------------------------
The design of the product is good. This was a replacement for a previous part that went bad. It came with a different connector than the previous one. Product works as designed however the built in tables in the AEM EMS do not match in my case. Measuring resistance of the EGT sensor yields correct results. The fault is in the EMS maps, not the sensor.

Beau Fenske
06/08/2004
-----------------------------------
As advertised. More importantly - you had it in stock! You helped me get my car back on the road quickly. Thanks!

Jarad Mitchell
06/08/2004
-----------------------------------
The SAFCII is being used in conjuction with a vpc on my single turbo supra (94). It is quite easy to use and install, and I am very pleased with the display features it has. I have seen gains in my horsepower, although I don't have an exact measurement of exactly how well this device increased my horsepower, I know that it contributed to signifigant gains. For supras, it has been tried and proven countless times. This is a great product for anyone not wanting to get a standalone.

Jason Sibert
06/08/2004
-----------------------------------
These wheels are amazing. People love them, they are unique, have enough clearance for a Brembo brake kit upgrade, and are extremely light (~20lbs).

Paul Bachta
06/08/2004
-----------------------------------
Had it installed by a dealer with no problems. Everything bolted right in as expected. Don't think it increased power very much but i noticed the oil temperature was about 5-10 degrees cooler. Main reason i bought it was for benefits to maintaining the engine longevity under rough driving. Satisfied with the product.

Carl Valderama
06/08/2004
-----------------------------------
This Quaife ATB diff went into a completely rebuilt transaxle for a Corolla GT-S being prepped for SCCA Solo 2 events. Obviously, the Quaife units are on the expensive side as far as LSDs go, but the fact that it carries a lifetime warranty even in racing conditions is priceless. As with most transaxles, swapping the diffs is a bit involved, but the actual installation of the unit was simple and fit perfectly. No ghetto-rigging this time! Now, instead of waiting for what seems forever to get back on the gas while exiting turns, I can start applying the gas much sooner and have a higher exit speed. What more can you ask for? Good stuff!

Charles Arendt
06/08/2004
-----------------------------------
works great, looks good. i've been using this for 6 months now w/ my hks type s fmic and i haven't experienced any overheating problems on hot days, bad traffic, etc.

Charles Arendt
06/08/2004
-----------------------------------
works great. i would recommend not cheaping out and buying the data-logging component. i thought i could read it in real-time but i was mistaken.

Charles Arendt
06/08/2004
-----------------------------------
works fine... looks great in the stock supra dash next to the clock location. 2-3 times it's taken 1/2 hour or more for the needle to move above 200degrees but it could also just be my wiring.

Weston Boege
06/08/2004
-----------------------------------
I was suprised that these pillar pods incorporated the stock "Oh Crap" handles and everything. Gauges fit into the pods fairly tightly keeping them from moving around. Only complaint i had was that there was a little gap on the drivers door side of the pillar pods. Other than that they have very good craftsmanship.

Weston Boege
06/08/2004
-----------------------------------
Great construction and quality. But when you want the best you pay for it..

Oliver Clarke
06/08/2004
-----------------------------------
Great sreet pad. Very little dust. Easy to install. Good track pad. No fading but could be better with a bit more bit.

Oliver Clarke
06/08/2004
-----------------------------------
Great street pad. very little dust, easy to install. Good track pad. No fading but could use a little more bite.

Oliver Clarke
06/08/2004
-----------------------------------
The hawk pads I perchased for a friend. They work well on the track and street. The do dust to much and when cold make alot of noise.

John Smith
06/08/2004
-----------------------------------
This is probably the best upgrade I ever did to my car. It allows you to control everything on your vehicle. It has a big learning curve but in the right hands it is awesome. It was pretty easy to install but should be tuned by a professional like torquefreaks.

John Smith
06/08/2004
-----------------------------------
I love this kit. It is very complete and a awesome performer. My car made 650 RWHP with this turbo at 30PSI on an auto. 4k stall is a perfect match. This is the best bang for the buck.

Lino Martinez 3rd
06/08/2004
-----------------------------------
The Koyo Radiator performs flawless and was very simple to install. My water temps decreased alot and my car ran so much cooler on hot days. Koyo makes a awesome product.

John Smith
06/08/2004
-----------------------------------
Easy to install and use. I had to take apart to tighten the clutch several times to get it to close the bottle all the way. After it was working it sat for a few days then it wouldn't open the bottle and I had to tighten the clutch again. Seams to be ok now.

Andy Ostic
06/08/2004
-----------------------------------
Intake was very easy to install and had a bit of noticeable gain in the high end, but deffinately has better throttle response than stock. Slightly louder (more so if you remove the resonator box in the bumper). I liked my friends AEM intake better though, sounded and responded much better.

Edward Marshall
06/08/2004
-----------------------------------
The product was clean and well-fabricated; no complaints at all about the construction. Power gains were very minimal, as expected, but the elimination of the rubber damper in the OEM crank pulley (and thus eliminating the most common reason for needing to replace the pulley, as the stock rubber has a tendancy to separate) was well worth the swap, and the pulley set as a whole definitely looks attractive under the hood if you're into that kind of thing. I've had the set on my car for quite a few months now, with no noticable problems. The only problems I had were the lack of direction on the proper way to remove the alternator pulley (something not entirely obvious, and rather difficult to do), and locating the proper belts for the pulleys; for the price, you'd think they could throw in a set of belts fitted to the pulleys. (Don't use the OEM belts, or you'll be suffering through a lot of squealing, especially in cold or wet weather.) In the end, worth the purchase if, like me, your OEM crank pulley has separated, and you'd rather not make replacing it a habit. Don't do this upgrade for the performance, unless you're at the point where every gram of rotating mass is important. Oh, and get blue. Blue makes more horsepower. ;-)

John Smith
06/08/2004
-----------------------------------
Solid performer. A must on a single turbo car with AEM EMS.

Andy Ostic
06/08/2004
-----------------------------------
Exhaust was very easy to install, noticeable high end gain when paired with an intake and no low end loss. Wish I had gone with a 3.5 inch system now though after finding out that on my 2.4l engine there is still no low end loss and bigger high end gains. Apexi N1 is a great system though, great sound and almost silent at idle.

John Smith
06/08/2004
-----------------------------------
Pretty easy install on the Supra. Works well on my auto. You really have to press the brakes then lock up for it to not walk on you. Makes for EASY burnouts. Lacked good instructions but were easy to find on the net.

Orian Iglesias
06/08/2004
-----------------------------------
Install was flawless and the pistons were great! They have seen 550+rwhp and 30 psi of boost without fail. Still have 160 compression across the board to this day.

John Smith
06/08/2004
-----------------------------------
I love these gauges. Really attractive and easy to read.

John Smith
06/08/2004
-----------------------------------
Nice fit and finish. A complete replacement and is easy to install. A little intrusive as in your face. The last guage ends up real close to your face. I would have gone with a 2 pod.

John Smith
06/08/2004
-----------------------------------
Easy install, easy to use, and works well in daylight. Lacks a silver bezel and option for green LED.

Mark Sudenga
06/08/2004
-----------------------------------
The product is great. No problems at all. It was pretty easy to install and the car runs smoother. I cannot really tell if the car gained any power or performance.

Liz
06/08/2004
-----------------------------------
I REALLY DID NOT BUY THE PRODUCT FOR PERFORMANCE, OTHER THAN TO GET MY CAR BACK ON THE ROAD. IT WAS EVERYTHING I EXPECTED! I AM VERY PLEASED WITH THIS PRODUCT

Chris Hayes
06/08/2004
-----------------------------------
This works exactly as expected and I have had no problems with it at all. I would buy it again if I had to do it over.

Joe Carrasquillo
06/08/2004
-----------------------------------
This product was exactly what I ordered. It was easy to install and works as advertised. I am very pleased with this part.

Craig Thommes
06/08/2004
-----------------------------------
Excellent clutch! Very streetable, smooth engagement, good pedal effort, holds strong. Haven't even encountered even a hiccup with this setup at over 400 ft-lbs torque (at the wheels).

Scott Friday
06/08/2004
-----------------------------------
If it was 3 inch all the way through it would get a 10, but having it 2.5 to 3 inch does give plenty of clearance for the oil fitler and ease of installation. Get this DP with the N1 catback and you have one great exhaust.

Ken Blake
06/08/2004
-----------------------------------
The BOV performs very well, and is still on my car. I have no audible compressor surge.

Scott Friday
06/08/2004
-----------------------------------
Great sound, a definite increase in power, and at a good cost from HorsePower Freaks.

Michael Herring
06/08/2004
-----------------------------------
Two of the four injectors that showed up were the wrong size. The problem was fixed. New injectors were shipped overnight. Thanks.

Wayne Figueroa
06/08/2004
-----------------------------------
The product was a direct install. Be aware though that the downpipe does eliminate the first catalytic convertor. This downpipe is polished Stainless steel (looks like 321). It was easy to install. The only issue i see is that on the turbo contector side. The opening is only 70mm but not even less than 1/2" down. It opens up to 80mm??? All in all. This is a good down pipe and I have had no issues. Also it comes with an extra port to put a wideband sensor on it.

Breeze Floyd
06/08/2004
-----------------------------------
The lights were some what hard to install, but this is no fault of horsepower freaks. i'm just lazyyy. the lights came on time, as promised. they were exactly as shown/described by horsepower freaks. i put the lights in the vehicle just over a year ago. they are still there, flawless. i have not had any problems with them. thanks!

Michael Herring
06/08/2004
-----------------------------------
Great product, fast shipping, smokin price. Thanks!

Kareem Omar
06/08/2004
-----------------------------------
I ordered the Dual pod after returning the triple that i thought i wanted. It turns out that the dual pod fit great. Amber was vey friendly with the return and the shipping of the dual pod pillar. great service and great parts. Kareem 97 SP BK67GT

Michael Li
06/08/2004
-----------------------------------

Albert Smith
06/08/2004
-----------------------------------
Swaps easily with stock FPR. Easy to adjust.

Albert Smith
06/08/2004
-----------------------------------
A must for EMS tuning. Works great with external display.

Jason Sibert
06/08/2004
-----------------------------------
Tres magnifique

Albert Smith
06/08/2004
-----------------------------------
Relatively painless to install if you can solder. Works great.

Jason Sibert
06/08/2004
-----------------------------------
The only drawback to these shocks is that to change the stiffness setting you must completely remove the shock from the car. It does not have the turn dial as indicated by the picture.

Scott Humpert
06/08/2004
-----------------------------------
Product performed well, was fairly easy to install, hell of a power gain, still working, and fairly high quality. Only concern was with an installer error (my own darn fault) with the press to fit connecters on the pressure line to the head unit, one of the connections wasn't quite completely pressed in, but it leaked above 8psi, so the head unit only ever saw 8psi, while the turbos were spooling uncontrolled. I heard the pressure leak (above the audible knock) and fixed the issue.

Cory Crook
06/08/2004
-----------------------------------
Sounds GREAT!! Very loud, but, not in an annoying way. Doesn't leak at all, I used it on a highly modified Buick GN. Worked great!

Cory Crook
06/08/2004
-----------------------------------
Excellent fit and finish!! Welds are perfect!

Cory Crook
06/08/2004
-----------------------------------
Fitment was excellent, finish was excellent. The throw feels real nice, my only complaint is that the shifter rattles when at full throttle above 6,000rpm. Other than that, it's the best shifter for the 240 on the market!

Cory Crook
06/08/2004
-----------------------------------
Fitment couldn't be better, the welds looked excellent and adjustment was very easy. Top notch part!

Derek Steffey
06/08/2004
-----------------------------------
Standard 3" downpipe. Welds looked fine and it came with a flat gasket for the EGCV housing. Easy to install with basic tools in about 25 minutes (assuming your exhaust nuts aren't welded on). Went from stock boost of .8bar peak to new peak of 1.1bar with a cat-back exhaust (Apexi-N1). Exhaust stinks without cats and need a boost cut controller though. Probably save 10 lbs over the stock downpipe assembly as well :)

Roger Tobias
06/08/2004
-----------------------------------
This exhaust has worked out perfectly. It is super easy to install. It was a improvement in all catergories, power gain, speed, etc. I thing I like most about it is that fct that it is quite when I am getting on it and that is with the silencer removed.

Clint Wadsworth
06/08/2004
-----------------------------------
The product met my expectation and has performed excellently. Installation was not too difficult and has improved the shifting perfomance.

Derek Steffey
06/08/2004
-----------------------------------
Installed on 94 Supra. Mold and plastic quality is good, but the upper corner doesn't fit flush on the door molding at the top. Not a major problem, but doesn't look factory if your picky. I painted it with flat-black before install and it matches the interior very well.

Derek Steffey
06/08/2004
-----------------------------------
Installed on 94 Supra. Tested the transducer before install in some boiling water, and it read back exactly 100C...another high-quality sensor from Greddy that's been working great for 2+ years.

Derek Steffey
06/08/2004
-----------------------------------
Installed on my 94 Supra using the Lexus IS300 union bolt on the oil-filter bracket. Has been working great for 2+ years. Mounted the aluminum sensor bracket on the rubber isolated ABS piece near the intake manifold.

Yamil Widy
06/08/2004
-----------------------------------
A must for any show car or single turbo supra.

Yamil Widy
06/08/2004
-----------------------------------
Looks Good.

Derek Steffey
06/08/2004
-----------------------------------
Great BOV, gives somewhat high-pitched "whistle" on small reliefs and more of a banshee whoosh on large boost reliefs. Easy to install to the flange, just be sure you have a good and strong set of C-clip pliers handy. I had no adjustment problems at all, left the adjustment screw alone and it's been working great for 2 years.

Ben Haynes
06/08/2004
-----------------------------------
Easy to install. Looks great on my car. Probably most popular wing for the MKIV

Yamil Widy
06/08/2004
-----------------------------------
A must if you are running a G-Force or a Mo-tec with a higher Rev-limit. Just wish it worked better with AT.

Yamil Widy
06/08/2004
-----------------------------------
Helps the look of the engine bay.

David Engel
06/08/2004
-----------------------------------
I almost gave this one a 9, but only because I thought there was too much hose in it. I figure I can't really fault them for that, though. The hose is very nice and there is definitly more than enough in the kit. You could probably save a little money by buying less in each individual size you need, but I found it more convenient to just get the kit. You'll never have to make another trip to the store to buy more.

Yamil Widy
06/08/2004
-----------------------------------
The Best Bang for the Buck.

Michael Lee
06/08/2004
-----------------------------------
Pretty good.

Yamil Widy
06/08/2004
-----------------------------------
The Best Bang for the Buck. A must for any Supra owner.

Weiming Wang
06/08/2004
-----------------------------------

Yamil Widy
06/08/2004
-----------------------------------
Love the Defi Set-Up!

David Engel
06/08/2004
-----------------------------------
I purchased this clutch kit along with an OEM flywheel to replace my OEM setup that had gone 95k miles (30k at BPU). I have put 9k miles on it so far and have no problems with it holding BPU power. Pedal pressure and engagement feel virtually stock. I have even put about a half dozen or so passes on it at the drag strip with no issues.

Yamil Widy
06/08/2004
-----------------------------------
Love the Defi Gauges!

Yamil Widy
06/08/2004
-----------------------------------
Love the Defi Gauges!

Yamil Widy
06/08/2004
-----------------------------------
Love the Defi Gauges!

Yamil Widy
06/08/2004
-----------------------------------

Asheesh Seth
06/08/2004
-----------------------------------
Like all of the other downpipes, it performs very well. However, the fact that it is 100% stainless steel is what sold me on it. I do get caught in the rain sometimes, and I was not going to settle for mild steel. Beware of imitations that advertise stainless steel, but the flanges are really made of mild steel. As far as I know, this is one of the only 100% stainless downpipes. No rust/corrosion after 2 years of use. Excellent product.

Asheesh Seth
06/08/2004
-----------------------------------
Great Product. Pretty easy to install, except that I had to re-tap one of the ports for one of my senders which was not too big of a deal. It is a very convenient way to hookup senders for oil temp and pressure (I have both) and also makes changing the oil a whole lot easier.

Larry Ulibarri
06/08/2004
-----------------------------------

Larry Ulibarri
06/08/2004
-----------------------------------

Steve Baune
06/08/2004
-----------------------------------
The flywheel does not work with the Crank Position sensor, so if you have an OBDII engine, you will not pass DEQ in Oregon. I have heard that new versions of this flywheel do have it. Contact the manufacture to make sure.

Christopher Tressler
06/08/2004
-----------------------------------

Michael Eltiste
06/08/2004
-----------------------------------
Great Product! It was easy to install with the vehicle specific wiring harness. Took less than 1 hour. It works great.

Michael Eltiste
06/08/2004
-----------------------------------
These are LOW impedance injectors (about 3 ohms). You may need to add a resistor pack or a 10 ohm 10 watt resistors to these injectors for high impedence applications. Good quality product. I needed more fuel to support more boost. These were installed in my 89 RX-7 Turbo. Be sure you have the proper o-rings, grommets and electrical connectors for these injectors. In my case, I used Mazda O-rings and grommets. The local parts store had the injector clips. It's a good idea to replace your fuel filter as well. If you replace any fuel lines, be sure to use "fuel injection" hose, not standard fuel line. Expect to pay about $1 per foot for this. The line must be stamped "fuel injection". Again, no problems with the product, just be prepared to aquire the other required items. Good Luck, Michael 89 TII

Daniel Teahan
06/08/2004
-----------------------------------
HP freaks are the BEST !! I will always check with the hp boyz before I purchsae a piece for my dawg!! The clutch is awesome! My neighbor asked me how many gears can I chirp? I said all six! You are the best !

Bill Perkins
06/07/2004
-----------------------------------
Combing with the silver center spring, I found the boost curve holds steady datalogging with the AEM EMS. With the softer spings the boost curve used to drop.

Bill Perkins
06/07/2004
-----------------------------------
For the ultimate tunablity and performance out of your car.

Erik Scheuneman
06/07/2004
-----------------------------------
The N1 exhaust system is very good. The only thing i have a problem with, is on the N1 downpipe, it is 2.5" at the very beginning and then goes to 3". Other than that...flawless.

Derek Choe
06/07/2004
-----------------------------------
After awhile my clutch began to chatter more than when first installed. It's bit anoying.

Derek Choe
06/07/2004
-----------------------------------
Works great

Derek Choe
06/07/2004
-----------------------------------
This is working great

Kevin Rue
06/07/2004
-----------------------------------
This product perfomed how I expected. I am still using it and it is holding well still.

Kevin Rue
06/07/2004
-----------------------------------
It was what I expected and I am still using it. Thanks.

Jason Sugai
06/07/2004
-----------------------------------
the clutch was definetly slippable and very smooth! the thing that i was disappointed over was that it fused on me about 4 times or so while launching the car. sometimes not even a really hard launch but a medium one... other than that from a roll i don't think the clutch slipped and held the power nicely.. if you drag race, i think this clutch is a 6.. if you don't drag race AT ALL, i would rate this clutch at a 8.5

Jason Sugai
06/07/2004
-----------------------------------
the exaust housing definetly helped me t04r spool up (mid range) better... it was kind of a pain in the butt to change the downpipe etc but it was worth it.

Silvino Orozco
06/07/2004
-----------------------------------
This unit has done me well by being very visible and caused no odd electrical issues of any sort. My biggest gripes are that the size of the unit should be MUCH smaller than it is and its a bit pricy for what you get.

Silvino Orozco
06/07/2004
-----------------------------------
A good looking and functional unit. All the hardware was included with the kit and I had no issues with the fittings for the install unlike many other kits available.

Silvino Orozco
06/07/2004
-----------------------------------
This unit has helped me keep a solid ignition system when running high boost. It worked well with the OEM ECU and AEM ECU.

Gary Wulkowicz
06/07/2004
-----------------------------------
Great fitment, looks, value, and (presumably) performance. Fit without modification to Stillen bumper.

Silvino Orozco
06/07/2004
-----------------------------------
It holds the boost but doesn't really respond as well as the HKS SSQ. It has a less gawdy sound than the SSQ however so I'll probably continue to use it.

Silvino Orozco
06/07/2004
-----------------------------------
This PP has worked in several clutch combinations I've used and the pedal effort has been nice for a regular car. The power held by this PP has been sufficient in all conditions when coupled with the right clutch disk and flywheel.

Gary Wulkowicz
06/07/2004
-----------------------------------

Robert Beaulieu
06/07/2004
-----------------------------------
Perfect installation and performance. Has been in use for over two years and not one problem.

Keith Hart
06/07/2004
-----------------------------------
Installation was simple for these wires. I didn't notice any improvement specifically... but they are nice wires.

Keith Hart
06/07/2004
-----------------------------------
Installation of this BOV was very simple. My old (stock) valve was leaking quite a bit and installing this new one made it possible to utilize all of the boost I was running. I actually had to turn down the controller as I was hitting fuel cut simply by upgrading to this new BOV.

Anthony Vassallo
06/04/2004
-----------------------------------
Amber, Many thanks for all your help. Surely will keep you first in my list for future needs, it has been a pleasure to do business with you.

Tony Galante
06/03/2004
-----------------------------------
Thanks again you have been a big help and a major reason why doing business with you guys is so favorable.