Testimonials (8,057)




2013NovOctSepAugJulMayAprMarFebJan
2012DecNovOctSepAugJulJunMayAprMarFebJan
2011DecNovOctSepAugJulJunMayAprMarFebJan
2010DecNovOctSepAugJulJunMayAprMarFebJan
2009DecNovOctSepAugJulJunMayAprMarFebJan
2008DecNovOctSepAugJulJunMayAprMarFebJan
2007DecNovOctSepAugJulJunMayAprMarFebJan
2006DecNovOctSepAugJulJunMayAprMarFebJan
2005DecNovOctSepAugJulJunMayAprMarFebJan
2004DecNovOctSepAugJulJunMayAprMarFebJan
Jeremy Pickett
04/29/2006
-----------------------------------
Good pads, no sqeaking or noises, smooth engagement. I really like them and gave a noticable improvement in stopping power. They seem to be wearing very well too. Only 2 issues I have is that they do seem to dust more than expected, wheels get dirty after a couple days, and second on really cold mornings you can tell the first time you hit the brakes they take a split second to warm and grab as intended.

Jeremy Pickett
04/29/2006
-----------------------------------
Good pads, no sqeaking or noises, smooth engagement. I really like them and gave a noticable improvement in stopping power. They seem to be wearing very well too. Only 2 issues I have is that they do seem to dust more than expected, wheels get dirty after a couple days, and second on really cold mornings you can tell the first time you hit the brakes they take a split second to warm and grab as intended.

Khiem Tran
04/28/2006
-----------------------------------
A very well built piece. It came with the stiff spring (red spring) installed. The red spring is supposed to support at least 19 psi without any boost controller, however, mine was only able to boost 15 psi max even with the turnbuckle turned all the way down. I found out that Forge had made the arm too long and it needed to be shortened. Its a shame I had to have the Forge unit modified in order for it to work properly. Forge should check these units for accurracy before they ship them out. After the modification, the unit worked like a charm. Boost is much more consistent, although I still experience a little boost drop.

Brian Spoon
04/28/2006
-----------------------------------
The extra horsepower from the Digi CR is immediately noticable. Even though I've now lifted my rig and put larger more agressive tires on it, the extra horsepower and torque from the module make it pretty easy to burn the tread away if I'm not careful. Well worth it...

Bryan Meredith
04/27/2006
-----------------------------------
Thank you guys so much, the intake arrived earlier than stated, I appreciate the prompt service, you guys are the best!!!!

Rodney Riley
04/27/2006
-----------------------------------
I installed the short weapon r into my 99 subaru legacy gt limited sedan. Everything worked just fine and the installation is straight forward. It makes a suttle intake sound and throttle response is better. I do recommend this part for ease of installation, and quality.

Xiong Her
04/27/2006
-----------------------------------
Excellent Exhuast System, will recomend it to everyone. Even better with the Tanabe downpipe.

Chris Masseth
04/27/2006
-----------------------------------
The fit was good, their was a little issue with reusing the stock clips to hold it tightly in place. Brake feel is much better than stock. Install was easy, just a pain bleeding brakes.

Matt Dunn
04/27/2006
-----------------------------------
I tried this on an OBDII BMW and i could not make it work. I guess the sims are fine if they work...

David Emerson
04/26/2006
-----------------------------------
fitment was great, all holes matched up great

David Emerson
04/26/2006
-----------------------------------
fitment was great, all holes matched up perfectly

Kenneth LamYan
04/26/2006
-----------------------------------
Thanks for keeping me informed. I really appreciate it. Most sales personnel usually don't. Thanks again. I will surely do business with you/horsepowerfreaks.com again. Kenneth

Scott Piepel
04/25/2006
-----------------------------------
Looks Aweseome with the matching Thermal R&D tip. installed with 2.5in piping and an 18" resonator, so its very quiet. nice deep tone, not loud or raspy.

Mal Martin
04/25/2006
-----------------------------------
Guage performed as advertised. Only difficulty encountered was that i had to update the EMS softwear in order for the guage to work properly.

DJ Patterson
04/24/2006
-----------------------------------

Bill Dewees
04/24/2006
-----------------------------------
No need for a tracking number. Everything arrived just fine. Thanks for the great service. Bill

Michael Beghtol
04/24/2006
-----------------------------------
Very Helpful tuning tool. Not nearly as expensive as the other and it fits in my gauge pod.

Matt McClintock
04/24/2006
-----------------------------------
It is a good part that does what it clames but I can only speak of it installed in other vehicles as I have not yet installed it in my car.

Anthony Rice
04/24/2006
-----------------------------------
hey kev, I just want to say thank you for all you help and with keeping me informed about my orders. Ill be looking forward to doing alot more business with you and horse power freaks. Thanks Again

Carlos Ramos
04/23/2006
-----------------------------------
Good communication between my self and sales person on the Comptech Differential for my S2000. Install was easy if you have know how to install them. The Part work without any glitches or noise. Would buy this part again if I was looking for an upgrade. Thanks for every thing.

Sean Loginovs
04/22/2006
-----------------------------------
For a knockoff header I was suprised with what I got, it wasn't flawless but the quality was quite good, nothing that couldn't be fixed with a file and a little time. the only complaint I have has to do with the high temp paint pelling off 10min after I got it to operating temp and the smell of said panit when burning off. Powerwise I dont have a Dyno to test on but it seems a little more resposive in the upper mid RPM range 4500 -5200. Below that seems a little sluggish, but that may be due to the type of cat back system I used i.e(Highflow)

Dustin Sippey
04/21/2006
-----------------------------------
Installation was easy,no problems and sounds good!

Jeff Garza
04/21/2006
-----------------------------------
Great product!!!!!! fit like a charm easy plug and play. Horse power in seconds. no mods just send ecu off and a couple of days your ready to go. thanks!! Ron

Neil Basham
04/20/2006
-----------------------------------
impressive performance

Tyler Kimberling
04/20/2006
-----------------------------------
This is an awesome clutch, great combo of daily and track drivability. Grabs and holds really well and should last me a while. The only problem with it is that you may get some clutch chatter.

Sean Harmon
04/20/2006
-----------------------------------
The D2 Coilovers worked out great their exactly what I ordered and they went on great I like the capabilities it has and the ride isn't like a BMW or anything but its pretty dam good compared to other coilovers I have ridden on in the past but overall they are great and well worth the money.

Moises Muniz
04/20/2006
-----------------------------------
Thanks for the update. You guys are always great. Moises Muniz

Kenneth Dwinnells
04/19/2006
-----------------------------------
Dear sirs, Received the shipment last week and all is well. Thanks for the prompt service. Thanks, Kenneth Dwinnells

Mike Deluise
04/19/2006
-----------------------------------
i just have to say one thing about horsepowerfreaks.com, i have never dealt with an online company that is more reliable, trustworthy, and flat out easy to use. i order you guys ship, simple as that. if you ever make some sort of sticker or even window logo that you would like me to put on my car to advertise for you i would be glad to. it is not every day that a person can have this much satisfaction from an online company. thanks once again for the incredible service.

Hal Mcdonald
04/18/2006
-----------------------------------
You can display any parameter in the AEM ECU with this gauge. It works very well but i had some difficulty getting it turned on at first. AEM has eliminated this problem with the latest software update. You dont have to buy 3 or 4 gauges. Just 2 or 3 of these and have any output you want from the AEM. A great deal.

Dustin Hager
04/18/2006
-----------------------------------
Thank you for the update! It's nice to find an online parts store that actually communicates when there is a back order or when there is a shipping delay... lol. I really appreciate it!

Milazim Veliu
04/18/2006
-----------------------------------
the lowered stance looks good; the tires don't rub against the wheel wells. I haven't noticed a significant difference in handling.The directions say to trim down the factory bump stops, on my cavalier it's fine for the front but the rear bumb stops aren't removeable. That caused my rear shocks to blow out within a month.Without the bump stops, there will be too much suspension travel; most likely causing the shocks to blow out. I replaced my blown aftermarket kyb's with a pair of stock due to it.

Milazim Veliu
04/18/2006
-----------------------------------
product performed worst than the stock rear shocks. Install was straight foward. My rear shocks didn't last longer than a month. The reason why is because they don't come with bump stops; the old bump stops aren't reusable with the rears. After a couple hard bumps, the suspension travel was too much and blew them out.

Matthew Ball
04/18/2006
-----------------------------------
I thought the driveability was much better than people had told me, however I'm a little more experinced at driving high clamp load pressure plates than most people.

Eric Sich
04/18/2006
-----------------------------------
Came with everything and even a nice sticker! Studs seem incredibly strong, perfect for any high hp engine, or just prevention on any engine.

Eric Sich
04/18/2006
-----------------------------------
Perfect gasket except I got the older version which required removal of one copper rivet. No problem tho, otherwiese perfect.

Sam Elassar
04/18/2006
-----------------------------------
an easy way to measure lambda at wot. obviously not accurate for measuring lambda at idle.

Sam Elassar
04/18/2006
-----------------------------------
the lambda sensor was faulty and it was not covered under warranty.

Zeyad Samara
04/17/2006
-----------------------------------
its the best part i ever buy , i think its make my honda vtec rpm much faster i like it , and from shift to other the rpm was back to 4500 or 4800 it mean the vtec not open but now i can feel it its back to 5500 and more , and if i race with my friend and he have the same car and same engine first i can jump befor him and when i use the 3rd shift i can feel that my car go faster i dont believe this and when i use the 4th. shift ...its crazy the rpm faster and faster . i have many v.clip for this crazy rpm. its very great for any one have a VTEC .

Brian Blois
04/17/2006
-----------------------------------
Expensive, but worth every penny.

Jared Chafee
04/17/2006
-----------------------------------
excellent pump, 550 whp no problems

Nicholas Canizares
04/17/2006
-----------------------------------
Quality construction. Easy to install, except clips weren't tight enough so I used my original ones. I didn't notice any more firmness of the pedal, even after brake bleeding. But that could be another issue in my brake system.

Peter Shea
04/17/2006
-----------------------------------
Did exactly what I want it to do and easy setup with the harness.

Terrance Lee
04/16/2006
-----------------------------------
Great product, but had to use b series radiator hoses.

Terrance Lee
04/16/2006
-----------------------------------
great product! Good for turbo applications.

Caleb Gibson
04/16/2006
-----------------------------------
Wasn't a great product, but It performed decently. Customer thought it was too short for tha money.

IRFAN MIR
04/14/2006
-----------------------------------
This product was and is a great product. The fitment and installation was easy as 1 2 3. Keep up the good work guys!!

Joseph
04/13/2006
-----------------------------------
Ben, I recieved my pulley about 2-3 days ago. Thanks for keeping me updated with all the info. Be buying from Horsepower Freaks again real soon. THANKS!

Jean-Pierre Bilodeau
04/13/2006
-----------------------------------
So... We forget It Please Cancel THe fuel pump. Thank you very much for your help and excellent service.

Matthew Freitag
04/13/2006
-----------------------------------
These SS brake lines are wonderful for brake control/feel. I have the Goodridge lines on my Corvette and both of my Supras and recommend them for everything. Note, they will not reduce stopping distances at all. What they do is make the pedal firmer and easier to control.

Roman RedLeaf
04/13/2006
-----------------------------------
Tom, Thanks for all of the help. I really appreciate it.

Jared Chafee
04/12/2006
-----------------------------------
excellent product, 24psi, 550whp, daily driven, have'nt overheated yet.

Dexter Wilson
04/12/2006
-----------------------------------
Works good on my car,& increase appearence of enginge

Adam Ridley
04/12/2006
-----------------------------------
The shop mechanic said it was a perfect fitment and of exceptional quality. Very happy; no leaks so far

Richard Mckee
04/11/2006
-----------------------------------
Product was easy to install, although direction lacked a little. I would have like to have seen more polished pipe and less plastic couplings. the horsepower was definently noticable. i was very surprised at the increase. Less lage time, nice intake sound. the intake caused less muffler [aftermarket] vibration and a better mellow sound from the muffler. unknown why this happened but a pleasant surprise!

Daniel Cook
04/11/2006
-----------------------------------
Great disk for stock replacement to moderatley powered cars, holds good and has great street manners for a daily driver that needs that extra grip. This is actully my third time to purchace this disc and my second car to put it on. AS a matter of perspective I've been driving Standards since my first car and 12 years latter I've beaten up a number of clutches. Simply put, I like this disc. Thanks, Daniel in Dallas, TX

Daniel Cook
04/11/2006
-----------------------------------
Considerbly lighter, but I was expecting it to come as a solid billet assembly that could be resurfaced, the flywheel I received has a surface that must be replaced. Also, the holes for the dowl pins arround the outside edge were just a little off. I could only use some of them for installation. However I've had it for 3 months and am enjoying the driving experience. After putting on my exhaust (months before) the car lost some low end power which I feel was regained after this installation. This was installed with the SPEC Stage II Kevlar disc and pressure plate which I have used in other cars and enjoy. Thanks, Daniel in Dallas, TX

Terrance Lee
04/10/2006
-----------------------------------
Product is great . Small gain in power . cooler intake temps. I recommend that the nuts be checked after 20 miles and then again after 50-100 miles to make sure they are tight. Great product.

Terrance Lee
04/10/2006
-----------------------------------
This is a great part and is very helpful for turbo charged vehicles. I recommend this part for everyone that is tuning there car for more power. Plus very easy installation. Thank for this great product.

Antonio Barajas
04/10/2006
-----------------------------------
The pedals ars cool it took me about 30 minutes to install them on my 93 sentra. The only thing was that there were only two screws per pedal.

Mike Cottle
04/05/2006
-----------------------------------
First off i'd like to say thanks to the whole crew at horsepowerfreaks...I do 90% of my business with them and they've treated me great since day 1...A special thanx goes out to BEN for helping me through the big ordeal with the eyebrows...he helped me resolve the issue and did everything he could to help me... Sincerely A Customer for life,

William B. Rushing
04/05/2006
-----------------------------------
You have been absolutely helpful the past two days. Thank you! I'll be leaving an excellent feed back report once I get everything. I will also tell my friends about you guys and others! Thanks again!

Patrick Thull
04/05/2006
-----------------------------------
Hello, I received the clutch! No need to worry about the shipping number :) Thanks for the great service though, I will definitely be a return customer. Sincerely, Patrick Thull