Testimonials (8,057)




2013NovOctSepAugJulMayAprMarFebJan
2012DecNovOctSepAugJulJunMayAprMarFebJan
2011DecNovOctSepAugJulJunMayAprMarFebJan
2010DecNovOctSepAugJulJunMayAprMarFebJan
2009DecNovOctSepAugJulJunMayAprMarFebJan
2008DecNovOctSepAugJulJunMayAprMarFebJan
2007DecNovOctSepAugJulJunMayAprMarFebJan
2006DecNovOctSepAugJulJunMayAprMarFebJan
2005DecNovOctSepAugJulJunMayAprMarFebJan
2004DecNovOctSepAugJulJunMayAprMarFebJan
Michael Roy
09/29/2007
-----------------------------------

Jeongmin O
09/27/2007
-----------------------------------
shipping, product quality, and product working good. I'm really satisfy everytihng.

Stephan Clark
09/26/2007
-----------------------------------
Product looks like it is good quality material. Welds are ok, but not the cleanest. One gasket broke and half of it fell out 20 miles after the install. I recomend upgrading to the oem style 4 ply gasket. The compressed graphite composite is just too brittle. This could save you hours of work, if you have to replace one like I did. Otherwise the pipe works great, and fit well.

Christopher Kanenaga
09/26/2007
-----------------------------------
Joel gave me a call the day after I ordered and he helped me correct my order after I accidentally ordered one front shock and one rear shock :) Great customer service!

Joel Tandberg
09/26/2007
-----------------------------------
One word: Perfect. Perfect fit, perfect quality, THE downpipe to have for any turbo Subaru.

Joel Tandberg
09/26/2007
-----------------------------------
One of the first mods you should do to any Subaru, gets rid of a lot of that drivetrain slop.

Joel Tandberg
09/26/2007
-----------------------------------
Factory fit except for the retaining clips. Could be a little better but the quality is outstanding.

Joel Tandberg
09/26/2007
-----------------------------------
I knew this wouldn't be a perfect fit for my forester but all I had to do was weld some small extensions to the rear hangers and it worked perfect. The fit and finish is much better than any other WRX exhaust and isn't quite as loud as some of the other systems with race style cans.

David Krause
09/26/2007
-----------------------------------
This product works well on the car and seems to perform well too; however, AEM should come out or add into this product, provisions for installing with a K24 motor such as the TSX that I have. I unfortunately had to cut the tube on the throttle body side down a little bit and had to bend and adjust the mount provision. Cutting the tube was fine, but the mount kinda looks below par now, but everything is functional. I also had to buy a 90 degree 3" rubber plumbing elbow from menards to connect TB to CAI tube. A fix would have been to get the RSX IM, but I really didn't want to get an RSX intake manifold because it is a different breathing animal than my TSX, otherwise this is a great product for a CAI. One other thing, maybe there should be a kit or instructions with this AEM CAI on where to put the windshield washer fuild container too, I still have to figure out a good place for that! Thanks Dave

Hubert Murias
09/26/2007
-----------------------------------
Don't waste your time if you're N/A because it will not make a difference. HOWEVER, YOU WILL SEE REAL SIGNIFICANT GAINS WITHT HIS IM FOR FORCED INDUCTION APPLICATIONS, HANDS DOWN. This IM is top quality, no corners cut and the bling factor is just incredible. FYI: The runners on the RSX actually curve and then straighten out towards the head because of the P.S. pump. The runners on k20 swaps are straight just like on the picture. You will need to get a custom a/c line made because the hood won't close due to clearance issues. That's about $50 and any local hose shop can do it. That and cutting the intercooler piping about 4 inches was the only mod's i had to do to accomedate it because it sticks out about 4 inches towards the drivers die. It's a big boy. Was it worth. Hell yes it was.

Alex DeLaCuesta
09/25/2007
-----------------------------------

Adam Halliday
09/25/2007
-----------------------------------
This is an amazing product, that works very well. the only downside is it being really complicated, but thats my fault for not knowing how to use it yet :)

Andrew chin
09/25/2007
-----------------------------------
David has been truly helpful, patient and provided me with advice all throughout this process. i want to say thank you again David and ill definately be shopping here again.

Ronald L Dalton
09/24/2007
-----------------------------------
i'm a slow poke. i'm still playing with it. i tested the guage and it works fine.-----Ron

Ridwan Tantomo
09/24/2007
-----------------------------------

Drew Smith
09/24/2007
-----------------------------------
Love my Volks. HPF was able to get me the style/ color I wanted, when everyone else said they were discontinued.

Firas Arabo
09/24/2007
-----------------------------------
Works extremely well, so long as you are not tuning below 11.0, which is outside the range of the gauge. The Bosch wideband sensor that is included is the same one my tuner uses.

Randy Mensah
09/24/2007
-----------------------------------
Pedal is so firm, it never feels like your hitting the floor. Please remember that this product isn't designed to make you stop faster, its more about the feeling under hard braking.

Gerwin Van den Belt
09/24/2007
-----------------------------------
High quality gaskets!

Josh Fields
09/24/2007
-----------------------------------
Dave ext 103 has been nothing shy of perfection. He is the best of the best.

Luis Liendo
09/24/2007
-----------------------------------
Excelent product, its the very first mod i always do on my WRX`s.

Han Liang Shiu
09/24/2007
-----------------------------------
Installation was easy as a breeze, ECU will need sometime to calibrate idling rpm, other than that, product is pretty neat !

William Saul
09/23/2007
-----------------------------------
AWESOME!!! This is exactly what I needed. Thanks HPF! Once again you guys are great!

Luis Liendo
09/23/2007
-----------------------------------
Very nice boost controller, known as the very best option for standalone òr piggybacks on WRX and STI.

Ivan Drusc
09/23/2007
-----------------------------------
A++

Debi Hardy
09/21/2007
-----------------------------------

Oscar Guardado
09/21/2007
-----------------------------------
perfectly built, easy to install.overall great part

Hubert Murias
09/21/2007
-----------------------------------
Great Stuff. Follow the instructions and wear a cheap long sleeve shirt that you can throw away and some cheap gloves that can be washed or thrown away. Why? Because if you don't your skin will be itchin bad for a couple of days. Anyways, great product. 10 minutes after turning off my RSX-S GT35R Turbo I can comfortably place my hand on the exhaust manifold. Try it on the turbo and you'll burn the skin off in a heart beat. It defenetly keeps temperatures downm so I also wrapped the charge pipe and downpipe. Be prepated for a crap load of smoke while the wrap "cures" the first couple of times you run the car. Nothing to worry about. I recomend this product to anyone with heat issues in the engine bay. I also recomend sealing the pores on it with high temp ceramic or silica paint.

Justin Gordon
09/21/2007
-----------------------------------
Looks good, soo far no slip/off timing. Was a direct OEM replacement.

Justin Gordon
09/21/2007
-----------------------------------
Sounds and looks good. Had no problem installing it, definatly a bolt-on assembly (came with gasket)

Justin Gordon
09/21/2007
-----------------------------------
Have done 5000 km on it, works like a charm

Andrew Chin
09/20/2007
-----------------------------------
David has been truly helpful, patient and provided me with advice all throughout this process. i want to say thank you again David and ill definately be shopping here again.

Chris Kindred
09/20/2007
-----------------------------------
Great product my HKS, does everything you could ever ask for!

Goldoni Diligent
09/19/2007
-----------------------------------
Good product. Good quality. Modifications had to be made for aftermarket rear sway bar. Not sway bar friendly at all. Fairly loud without silencer. Nice different tone with silencer.

Kevin Byrne
09/19/2007
-----------------------------------
very easy to install, ARP is number one for a reason!

Kevin Byrne
09/19/2007
-----------------------------------
amazing exhaust, nice tone, not too loud. Out of all the exhausts I've had on this car this one fits closest to the underside and has the best construction!

Justin Moore
09/19/2007
-----------------------------------
David really went out of his way to make sure that i knew exactly where my purchase was and what the details of the transaction were even after the sale, he has provided an exampletory customer service effort and in the most proffessional manner possible! Thanks again.

Christopher Erz
09/19/2007
-----------------------------------
If it wasn't for david I'd be up shits creak without a paddle =). Most knowledgable salesman I have ever spoken with.

Aaron Thompson
09/18/2007
-----------------------------------
awesome part! looks great! beautiful finish and workmanship. easy to mount. It performs just as expected. No problems at all. I recommend these intercoolers.

Michael MacDonald
09/18/2007
-----------------------------------
Pretty difficult to install and make the car vibrate at idle but this is what was expected. The good thing is my car no longer has wheel hop issues.

Christopher Erz
09/18/2007
-----------------------------------
If it wasn't for david I would never have considered doing all the extra buisness I have and will continue to do. If he ever leaves horsepowerfreaks my buisness with you ends. He deserves a raise and medal of honor for going above and beyond the call of duty as a sales representitive

Brett Bart
09/18/2007
-----------------------------------
Awsome HKS product! Install was a breeze, 30 mins. Hardest thing was to figure out where to mount, which wasn't hard at all! Gotta love HKS!

Howard Shoaf
09/18/2007
-----------------------------------
Install was straight forward, and the unit performed better than the AEM unit did using 1600cc injectors on a Honda. Very compact also making placement easy

Christopher Gamboa
09/18/2007
-----------------------------------
This rocks!!

Scott Williams
09/17/2007
-----------------------------------
the radiator performs great.It took my mech 20 min to install. the car run's alot cooler. you all did a great job,thank you

Daniel Messner
09/17/2007
-----------------------------------

Daniel Messner
09/17/2007
-----------------------------------

Felton Epps
09/17/2007
-----------------------------------
Great product. Be sure to have a quality set of adjustable cam gears to set properly.

Robb Crabtree
09/17/2007
-----------------------------------
Very good, worked perfectly as described. Makes a kinda loud humming sound while turned on, but since it is moving so much gas all the time, I understand why. The sound is very tolerable though. Will buy another for a different car in the future.

Mark Choate
09/15/2007
-----------------------------------
Looks good and exactly as seen

Maurice Griffin
09/14/2007
-----------------------------------
The APEXi WS2 is great for those looking to enhance the sound and look of their car. Perfect score!

Chris Wingard
09/14/2007
-----------------------------------
The springs went on easy. I joined them with the kyb gr2 shocks. After it settled the lowering was exact and the stance is great. Great quality product. I love the ride and the look.

Ber Xiong
09/13/2007
-----------------------------------
Hasn't snapped like the others I've used. Highly recommended!

Christopher Erz
09/13/2007
-----------------------------------
David is the most knowledgable salesman, with the go getter atitude to boot. He went out of his way to assist me in everything I was ordering and everything I need I couldn't get through horsepowerfreaks.com This man deserves a major raise. He went up and beyond the call of duty and Superseded every expectation I had. Amazing job done by him. Very professional, but laid back cool guy as well. I give him a 100 on your scale of 1-10.

Blake Tugman
09/13/2007
-----------------------------------
fast shippment....easy install...works the way it should..looks good

Chris Kindred
09/13/2007
-----------------------------------
Another great product by AEM!!!!

Chris Kindred
09/13/2007
-----------------------------------
Another great prodcut by AEM!!!

Julie Hoeren
09/12/2007
-----------------------------------
The intake was very easy to install. My car gained about 10 hp at the the wheels. Overall it's a great product.

Alvaro Correa
09/12/2007
-----------------------------------
NICE BAR, BUT ONE OR THE NUTS WAS NOT IN THE BOX!!

Jonathan Schoenfeld
09/11/2007
-----------------------------------

Christopher Rhoades
09/11/2007
-----------------------------------
the fit was pretty tight but went on easily(carful of the key slipping back and destroying your oil pump seal). it looks great but power gains wher not very noticable, however the engine did seem more responsive after the instal. The a/c will not blow very cold at idle(to be expected with underdriving) but cruising speeds takes care of that problem. It didnt seem to affect the charging system(i have a 1000 watt amp and it still pushes my subs just fine even at idle).

David Rowe
09/11/2007
-----------------------------------
SOUNDS GOOD AN GOOD POWER

Jonathan Greene
09/10/2007
-----------------------------------
easy to install especially on single piece supra calipers, these brake pads give upgraded stopping power from stock. They do have to heat up a little before full stopping power is achieved. All in all once the heat is in them they are Very powerful.

Edward Cullen
09/10/2007
-----------------------------------
fits perfect... had a few cracks but No big worries no work needed other then scuffing and painting... Judging by this product Ill be getting more from DG motorsports

Erik Dehaven
09/10/2007
-----------------------------------
the studs : exactly what i ordered. worked like a champ. quality was top notch. combined studs and cometic head gasket(.072). no more head gasket failures. will be stressing parts further in the future when the t3/t4 turbo gets installed. will update again when the boost goes way up.

Derek Yarbrough
09/10/2007
-----------------------------------

Randy Householder
09/10/2007
-----------------------------------
This part is awesome. If it had maybe on more adjustment it would be flawless. But this part is very stiff and one heack of a difference.

David Hayling
09/10/2007
-----------------------------------
Exactly as advertised. Fit perfectly on my GTR. Even came with a block off plug in case you don't use a water temp sensor.

Chad Reeves
09/09/2007
-----------------------------------
the flywheel was great it made a noticeable differance in the power and take off in my saturn! hope you all like it as much as i have

Edward Gardiner
09/08/2007
-----------------------------------
Clutch has broken in well... nice pedal pressure, smooth operation, seemingly great preformance. I will be putting it through more serious paces now that its "ready for use",Spec recommends 450 miles before abuse. I'll comment again if needed. There is a slight bit of noise I not used to, but that comes with the upgrade from stock and is only noticeable at startup.

Patrick Coughlin
09/06/2007
-----------------------------------
Some of the bolt on's that i have on my dsm are, a ported evo3 turbo, an ingen intake, dnp tubular exhaust manifold, and a greddy 24v fmic. The local perfomance tuner shop that worked on and tuned my car said that my lipp 02 housing is the coolest part on my car. I had it ported to match my ported turbine housing. The lipp 02 housing is flowing 22 psi on said turbo with unseen boostcreep. oh fyi turbo waste gate is upgrade to 34mm.

Tom Scott
09/05/2007
-----------------------------------
Packaging tape on top of box didn't hold up and there was no packing slip. Had it been an inflatable girlfriend I might have had some concerns :P ,but I don't think my timing cover was molested. Overall a very good experience and I'm sure I'll be back.

Nichole Tangalin
09/05/2007
-----------------------------------
Kyle was very polite and friendly. Unfortunately after the help he gave me, I ended up not needing the part and returned it, and again he was very polite.

Alex DeLaCuesta
09/04/2007
-----------------------------------
Fitment was ok. silicone couplers could have been longer. But did make the stock bov sound good.

Christina M. Townshend
09/04/2007
-----------------------------------

William Saul
09/04/2007
-----------------------------------
Well in addition to the Fuel pump upgrade, I also ordered some head studs, and bolts along with a set of Brian Crower Stage 2 (272in/272ex) cams. I currently stationed in Japan and own a 1998 Mitsubishi Evo V. With the help of Horsepower Freaks I am tearing up the streets of Okinawa. Once again HPF has come through once again.

Brian Demeio
09/04/2007
-----------------------------------
Looks and sounds great...easy install

John Pope Sr.
09/04/2007
-----------------------------------
Very simple to install! I wasn't sure if the brace for the TSX would fit my 2k6 Accord, as some said yes and others said no, but I wanted to try anyway. It bolted right in as if it was made for the Accord! So if you want to stiffen up your lower front end, this is the way to go!

Jimmy Vibert
09/04/2007
-----------------------------------
easy installation works great

Mark Bossio
09/04/2007
-----------------------------------
Great o2 housing, got this with the Megan Manifold. Great top end and torq gain from both. Awesome bolt on.

Mark Bossio
09/04/2007
-----------------------------------
I bought this plus the megan o2 housing for my EVO IX. You can feel the difference between the stock parts and these. More top end and nice torq gain from both. Great bolton's for stock turbo.

Brent Bynum
09/04/2007
-----------------------------------
Pretty good product, though looked to be a stock pump that had been modified...

James Sebastian
09/03/2007
-----------------------------------
My wife installed these herself in a few hours on her '06 Jetta TDI. She is running 215/35/19's and it rides close to stock with a lot more of an agressive feel.

Michael Kundo
09/03/2007
-----------------------------------
Easy to grip and light weight, plus give your car a good appereance look

Richard Headrick
09/03/2007
-----------------------------------
Unlike the Hawk Performance Plus pads I've used, these pads emit A LOT less dust. I've put these pads to serious use in the past month and only had to clean my wheels once. The rims weren't even half as dirty as the HP+ application put to use in two weeks. The only downside with the dust is that it's extremely hard to clean some of it off as it seems to have caked or melted onto my rims (and I can even break it off!). It does come off, but with a lot of extra work. However, these pads give extreme stopping power as if I have ABS on my car; regretfully, these pads perform fair after being hot under moderate use and braking distances increase.

NILCO A I ROLLAN
09/03/2007
-----------------------------------
the product was ok, easy to install the car became faster , I don't have the access to a dyno but it's faster and the gas usage is less thanks Nilco.

July Hibaya
09/02/2007
-----------------------------------
great!

July Hibaya
09/02/2007
-----------------------------------
great product and service

Kindu "Eddie" Delaleu
09/01/2007
-----------------------------------