Click to shop ecu tuning       

Testimonials (8,057)




2013NovOctSepAugJulMayAprMarFebJan
2012DecNovOctSepAugJulJunMayAprMarFebJan
2011DecNovOctSepAugJulJunMayAprMarFebJan
2010DecNovOctSepAugJulJunMayAprMarFebJan
2009DecNovOctSepAugJulJunMayAprMarFebJan
2008DecNovOctSepAugJulJunMayAprMarFebJan
2007DecNovOctSepAugJulJunMayAprMarFebJan
2006DecNovOctSepAugJulJunMayAprMarFebJan
2005DecNovOctSepAugJulJunMayAprMarFebJan
2004DecNovOctSepAugJulJunMayAprMarFebJan
Yesenia Nava
11/30/2008
-----------------------------------
it was what we expect it...we are really proud of your attention to us and the time you take out of your busy day to take me inconsideration....Thank You!!

Charles Brillantes
11/30/2008
-----------------------------------
Great brakes, I came from stock to ebc slotted/dimpled with these pads and they perform great so far, still breaking them in.

Creed Combs
11/29/2008
-----------------------------------
The alignment was off a bit. It's not quite centered. The holes for the manual headlight knobs were too small to utilize the factory dust covers. The rubber / plastic edging was a nice surprise. There was a fitment issue with the manual release for the hood. I had to enlarge the opening by approximately 1/4" X 1". All in all a nice piece. Thanks, Creed

Chris Hanson
11/28/2008
-----------------------------------
Great springs

Dang Tran
11/26/2008
-----------------------------------
David is very nice and knowledge Sale person.

Alex Lidner
11/25/2008
-----------------------------------
Great service, very professional. I will surely be coming back again for more. Thanks David!

David Hall
11/25/2008
-----------------------------------
Lost a timing cover bolt into the belt @ 7500 rpm. It made a terrible noise but held together to finish the event & get me home. A true test of quality. Thanks HKS!

Darwin Nicholas
11/25/2008
-----------------------------------
worked as advertised, no problems

Andrew Hastings
11/24/2008
-----------------------------------
Installed in SOHC 1.6l EG build. Have put down 250whp at 15lbs so far and still holding fine.

Paul Beatty
11/20/2008
-----------------------------------
Beefy rotors, fit well, coupled with carbon kevlar pads it feels like you dropped an anchor out the back when you hit 'em hard. A little heavy, unavoidable I suppose

Jose Gene Valverde
11/20/2008
-----------------------------------

Justin Trigg
11/20/2008
-----------------------------------
excellent fit and perfect color match

Eric Riddle
11/19/2008
-----------------------------------
product quality is good, nice welds,turned goldish color once heated up, performance is up, fittment we had to bore the cat flange with a drill a tiny bit to make the connection, equals to top company's[dc sports]header at a 1\3 of the price and close power %.

Kristopher Woodhull
11/19/2008
-----------------------------------

Hilda Goriya
11/19/2008
-----------------------------------
a little annoying to install but look great

Joshua Arbogast
11/18/2008
-----------------------------------
Worked perfect and still working.

Joshua Arbogast
11/18/2008
-----------------------------------
Worked perfect and still working!

Josh Tonelli
11/18/2008
-----------------------------------
These coilovers came quick and were very easy to install. Although they aren't top of the line, they work exceptionally well for any low budget. I installed them in about 20 minutes for the front and about 30 for the back and after that I noticed the handling was so much better than my previous set of lowering springs. They are a tad soft but they still work pretty darn well. I would definitely recommend these to anybody that has a low budget. Megan racing is still one of my favorite brands!

Jorma Takala
11/17/2008
-----------------------------------
I selected "other" because this is a testimonial about my entire HPF experience! I purchased the Suspension Techniques Sway Bar, brakelines etc, for my 1991 Toyota Celica GT. The mechanics had some trouble with the installation, the problem turned out to be the mechanics! Horsepowerfreaks helped us through that trouble without wasting a moment, contacting ST and their helpdesk and it was done. Or was it? After the installation I realized how much difference that swaybar made on the way my car handles.... I didn't add a swaybar, I put my car on rails! Lowspeed body roll is now completely nonexistant. My car tracks as straight as an arrow and instead of following the road when it dips down to the right(by the curb), Which so many cars do when they get older and looser, it ignores the features of the road below and literally made my car easier to drive. If you do nothing else to your sporty sports car....Add a Suspension Techniques Sway Bar, You too will be riding on rails. Driving my car went from being an absolute nightmare to a total joy. Thank you HPF! You guys rock. And Jimmy Nguon....... You da man!!!

Matthew Schlaner
11/16/2008
-----------------------------------

Matthew Schlaner
11/16/2008
-----------------------------------

Tarek Al fakih
11/16/2008
-----------------------------------

Daniel Smith
11/14/2008
-----------------------------------
These were easy to install,and the fitment was spot on. I didn't notice any power gains,but the brakes didn't fade during spirited driving. And thats what I wanted.

Daniel Hull
11/13/2008
-----------------------------------
Product was nice but very hard to install in vehicle. Brackets were hundreths of an inch from being perfect which made getting the bolts in to the floor of the car very very difficult. taking installation time from maybe a hour to three almost. also made seats very difficult to move back an fourth since it was such a tight fitment. but brackets were very nice and included a convient bracket for the stock seat belt.

Daniel Hull
11/13/2008
-----------------------------------
Product was nice but very hard to install in vehicle. Brackets were hundreths of an inch from being perfect which made getting the bolts in to the floor of the car very very difficult. taking installation time from maybe a hour to three almost. also made seats very difficult to move back an fourth since it was such a tight fitment. but brackets were very nice and included a convient bracket for the stock seat belt.

Andrew Hastings
11/13/2008
-----------------------------------
Purchased the stage two. good to 250ft/lbs. Put down 220ft/lbs so far and holds perfect.

Gary Collison
11/13/2008
-----------------------------------
Brandon, thank you. I appreciate the help you gave me today and over the phone up to this point. It was nice to meet you. You serve your company well.

Jordan Galetka
11/12/2008
-----------------------------------
These pads are exceptional for both dry/wet conditions. Stops on a dime. They were very easy to install. Hawk says they have low brake dust but my wheels get dirty from them in a short period of time. All in all they are a great pad.

Craig Prevost
11/11/2008
-----------------------------------
was not extremely hard to instsll. jumper clips don't provide adequate contact to wires. good performance gains when activated

Craig Prevost
11/11/2008
-----------------------------------
install was easy, great sound and performance gain

Brian ONeal
11/11/2008
-----------------------------------
Exactly as described,fits perfect...

Miguel Machado
11/11/2008
-----------------------------------
shipping was on time and the craftmanship of the part was excellent

Franco Smith
11/10/2008
-----------------------------------
it went on easy and it works well with the car. now if you have performance motor and transmission mounts or inserts for my 1991 mercury tracer 1.9L i would buy those too.

Junior Gaona
11/10/2008
-----------------------------------
I put mine on a mkiii supra, the head gasket was a exact match and is the only true multi layer head gasket out there that I found the quality is good comprising of three layers of steel to seal great no difference in horsepower but is a great insurance policy to make sure it doesn't blow again by far the best on the market.

Daniel Hull
11/09/2008
-----------------------------------
sliders worked good and were easy to install.

James Shamley
11/05/2008
-----------------------------------
easy to install, looks and performs much better than factory

Derrick Jones
11/05/2008
-----------------------------------
I like the BOV but I wish my last 2 orders weren't screwed and I sat around waiting days for them. Other than that I like it.

Soren Sorensen
11/04/2008
-----------------------------------

Soren Sorensen
11/04/2008
-----------------------------------

Soren Sorensen
11/04/2008
-----------------------------------

Soren Sorensen
11/04/2008
-----------------------------------

Jim Koth
11/04/2008
-----------------------------------
When I search for a piggyback engine mgt system on your site, nothing was listed for a '96 non-turbo Eclipse. Brandon recommended the 4-channel AEM F/IC unit and said it would work for my car. If it works, he's a hero, if not, I have a $400 headache. I know it will work, he seemed confident and knew what he was talking about. Thanks for your help!

Jason Dias
11/04/2008
-----------------------------------
THE SHOCKS WORK WELL. I REALLY LIKE THE RIDE HEIGHT ADJUSTABILITY. I WAS A LITTLE DISAPPOINTED WITH THE STIFFNESS OF THE SHOCK. YOU WOULD THINK WITH 30 ADJUSTABLE CLICKS THE MANUFACTURE WOULD HAVE WIDEN THE RANGE TO ALLOW A SOFTER SETTING IF DESIRED AND STILL KEEP THE MAXIMUM STIFFNESS SETTING. I PREFER THE STIFFER RIDE FOR CONTROL BUT MY WIFE DOES NOT LIKE IT.

Jim Riess
11/04/2008
-----------------------------------
Excellent product. I cannot and will not complain about a perfect product.

Tyler Carmack
11/03/2008
-----------------------------------
I bought these to install with a pair of Megan Racing seats in a 97 Accord. I was debating between OBX brackets and these, but OBX has a completely different design. Upon receiving and viewing the brackets they seemed well built, but built quickly. Where they used a tap to drill out the holes, they left all the metal shavings that were still attached to the bar so I had to spend about a 1/2 hour filing all the shavings off of the holes. Anyways, the hardware that came with the Megan seats allowed them to bolt right up to the brackets perfectly. Installation was not nearly as easy as I expected. Installing the passenger seat was okay, but difficult because the seat is in the way and you have to force they seat brackets because they dont line up perfectly. But, I got it in. The drivers seat was a royal pain. I got 3 bolts in and the last bolt took over 2 hours to get in because the bracket would not get close enough to the mounting hole and the OEM bolt was to short. It seemed as is if the bracket got twisted a little bit. In the end I had to hammer the bolt in, then tighten it. Also, you will have to bend the seat belt brackets in order for the seat to slide forwards and back, and the bracket will press against the center console and scratch it, but you will not notice it unless you look between the seat and console. Note: You will need to get 2 extra nuts to bolt the seat belt holster to the bracket. The nuts on the OEM seats are part of the bracket itself and are not removable. Get grade 10 if possible for your safety. Verdict: Seems well put together, but the fitment needs to be better to reduce a couple hours of frustration and is disappointing from such a great company as Weapon R. I give the seat brackets a 7 out of 10.