Testimonials (8,057)




2013NovOctSepAugJulMayAprMarFebJan
2012DecNovOctSepAugJulJunMayAprMarFebJan
2011DecNovOctSepAugJulJunMayAprMarFebJan
2010DecNovOctSepAugJulJunMayAprMarFebJan
2009DecNovOctSepAugJulJunMayAprMarFebJan
2008DecNovOctSepAugJulJunMayAprMarFebJan
2007DecNovOctSepAugJulJunMayAprMarFebJan
2006DecNovOctSepAugJulJunMayAprMarFebJan
2005DecNovOctSepAugJulJunMayAprMarFebJan
2004DecNovOctSepAugJulJunMayAprMarFebJan
Coki Siboro
09/30/2010
-----------------------------------

Coki Siboro
09/30/2010
-----------------------------------

Coki Siboro
09/30/2010
-----------------------------------

Coki Siboro
09/30/2010
-----------------------------------

Coki Siboro
09/30/2010
-----------------------------------

Coki Siboro
09/30/2010
-----------------------------------

Coki Siboro
09/30/2010
-----------------------------------

Coki Siboro
09/30/2010
-----------------------------------

Dennis Maduli Jr
09/29/2010
-----------------------------------
I never recieved the product, but did end up getting these. Works & looks real clean, but had it installed with front & rear sways bars, along with, front & rear strut bars so all in all the suspension on my car is a lot stiffer and hits turns like a champ

Ken Ng
09/27/2010
-----------------------------------
The metal backing pads were not installed perfectly aligned on these HPS hawk pads. What that means is the hole for the backing pad and the hole for the brake pad do not light up perfectly. Three out of the four pads I could not insert thru the hanger. I had to use a drill and round out the holes. Another point is these pads for the STI don't have squeal sensors. Which is interesting because the same pad set for the IS300 (which I also installed) has squeal sensors. Performance of the pad is good. I just wish a little better attention to detail from Hawk in assembling these pads and adding a squeal sensor.

Arron Ratcliff
09/24/2010
-----------------------------------
Excellent product! Ralco makes quality performance parts and after installing the new short shifter I felt a big difference in shorter shifts and felt the billet bushings. Its a lot harder to shift into reverse but nothing you can't get used to. I'm surprised at the kits price since it includes a weighted shift knob and bushing which most short shifters don't include at same price. If anyone needs a short shifter, I recommend this kit.

Steve Tullis
09/23/2010
-----------------------------------
I've used Magnecor wires on other cars and they perform just fine. No noticeable performance increase but they're durable and last forever. On this car I changed the distributor and spark plugs(NGK Iridium 9) as well and it definitely runs much better and has more power but hard to say how much of it is from the wires. The old wires were definitely in need of replacement. Haven't driven the car much since putting them on(it's an open track car) but so far so good.

Robert Hull
09/23/2010
-----------------------------------
maybe mine was flawed, but the 2 piece setup made a bad connection to the cat and it doesn't make a complete seal...won't buy 2 piece headers again

Kenton Von Hollen
09/21/2010
-----------------------------------
Working as they should

Kenton Von Hollen
09/21/2010
-----------------------------------
Working as they should

Kenton Von Hollen
09/21/2010
-----------------------------------
Worked as it should

Kenton Von Hollen
09/21/2010
-----------------------------------
Working as it should

Bryan Mundy
09/21/2010
-----------------------------------
Straight forward install. I still think the TIAL wastegates leak too much from the boost source.

Kevin Klann
09/21/2010
-----------------------------------
Easy install, works great, very good gauge for the price. I use STRI gauges in both my cars and haven't had any issues with any of them.

Brad Layton
09/21/2010
-----------------------------------
Kind of a pain in the butt to install (relatively, considering you're working on a Supra) but you'd be surprised how much 20 year old rubber shrinks! These should fix your targa leaks, although mine still leaks a bit, due to the roof being out of adjustment...

Brad Layton
09/21/2010
-----------------------------------
Kind of a pain in the butt to install (relatively, considering you're working on a Supra) but you'd be surprised how much 20 year old rubber shrinks! These should fix your targa leaks, although mine still leaks a bit, due to the roof being out of adjustment...

Brad Layton
09/21/2010
-----------------------------------
Pretty basic idea here, you'll likely need to file the inside of the holes (toward the pillar, unless you want your gauges to sit funny) to get your gauges to fit tightly. Some people may complain about his aspect of the product, but if you think for a minute, not every 52mm or 60mm gauge is going to ALWAYS be EXACTLY that size. This is likely done to ensure fitment is somewhat flexible. =)

Carlos Merhi
09/20/2010
-----------------------------------

Kenton Von Hollen
09/19/2010
-----------------------------------
Working as they should

Kenton Von Hollen
09/17/2010
-----------------------------------
No Problems

Kenton Von Hollen
09/17/2010
-----------------------------------
Excellent in the rain and in keeping traction...only problem is the speed based boost control can't be turned off on the fly

Kenton Von Hollen
09/17/2010
-----------------------------------
Works as it should...if you want meth all the time don't worry about this.

Kenton Von Hollen
09/17/2010
-----------------------------------
Must have part for any e46 M3

Kenton Von Hollen
09/17/2010
-----------------------------------
Recommend going to stage 2.5 as it gives you a fully reliable engine and so much more power.

Kenton Von Hollen
09/17/2010
-----------------------------------
Excellent driveability...little grabby when hot otherwise awesome.

Kenton Von Hollen
09/17/2010
-----------------------------------
Worked as it should

Vernon Genseke Jr.
09/15/2010
-----------------------------------
I could not install the product myself. I had to hire a professional to do it. Not as advertised. It was not easy for the professional to install either, he had to make 4 calls to the company for tech info and downloads. This was a cost I had to absorb...not happy...4 days in the shop! I did see a gain in power and it is still lasting 3weeks after installation. As for quality...3 weeks in is no measure...for what I paid for this it should last the lifetime of the vehicles performance. Time will tell but I can assure you that I will not purchase another one.

Mike Beckers
09/14/2010
-----------------------------------
I have a 1990 TEG that I put a JDM B18C GSR swap in and got the SPEC clutch going only on the advice of my HPF sales rep. As usual, they led me to a great product. I just have gotten to the end of the break in period and started to progressively slip it and throttle up on it harder. It has behaved better and better as it broke in. It has excellent engagement without noise or chatter. It also has a smooth and linear grab as it is engaged. The pedal pressure is near stock and I am very happy with it.

Adam Moore
09/14/2010
-----------------------------------
The bar was easy to install but I had to trim the plastic cowling behind the bar for clearance. Turn in response feels much better now with the bar and the color matched the engine bay pretty well.

Michael Magnan
09/14/2010
-----------------------------------
great product. much better than the fel-pro ones, which only lasted about 20,000 miles each. engine runs smoother than it ever had. great buy!!

Carlos Angel
09/14/2010
-----------------------------------
He is very knowledgable and was great at helping me choose the correct aplication and his own experience with the products. Definitly will do buisness with HPF. Thanks, Carlos Angel.

Marc Nickles
09/10/2010
-----------------------------------
I replaced two piece cross drilled rotors with these brembos because the old ones where warped. the old ones in the rain needed to almost be ringed out in the rain for them to work. the brembos have none of this problem. the initial bite on them is fantastic, they have performed flawlessly in all conditions. i would recomend them to any one looking for a inexspensive upgrade to there braking system, brembo has done there homework and produced a fantastic product. I look forward to many happy miles pounding on these.

Robert Keller
09/09/2010
-----------------------------------
Part was fine but couldnt install on my car due to the factory bolt used needed a speacial key to take off that my mechanic nor the dealership either had or was willing to remove. Have been trying to find a solution for 2 months with zero results. Therefore, not recommended, not an easy remove and reinstall item.

Glenn Dorsett
09/07/2010
-----------------------------------
they are twice as sticky as the oem one's and now stop me before the abs comes on

Justin Mendoza
09/05/2010
-----------------------------------
I have put 300 miles on this clutch and it works great, grabs and pulls hard. However the throw out bearing that came with it makes a sqeaking noise when the clutch is released and is has done it since it was installed. Mechanic says it may have been a bad throw-out bearing.

Gary Gordon
09/04/2010
-----------------------------------
nice!!!!!

Gary Gordon
09/04/2010
-----------------------------------
very nice!!

Carlos Merhi
09/03/2010
-----------------------------------

Carlos Merhi
09/03/2010
-----------------------------------

Kevin Green
09/02/2010
-----------------------------------
Easy to install on non cusco coilovers without the help of the japanese instructions. However, the force of the spring was focused on the spherical bearing of the camber plates, which may lead to premature failure of the bearing.

Joshua Henkels
09/02/2010
-----------------------------------
Thank you very much for your quick response and your ability to get the gate here as you promised! It's pretty rare these days that you actually get customer service and promised shipping dates through online orders. I just wanted to drop you guys a quick line and tell you thank you and how much I appreciate what you guys did! I will definitely be buying more product from you guys in the future! Thanks again and hope all is well.

Larry Palmer
09/01/2010
-----------------------------------
Excellent part and service