1310 Heavy Duty rear driveshaft for 2 door Jeep JL models with an automatic transmission. Replacement Driveline. This System is stronger than O.E. type applications recommended for stock to 4 1/2 inch lift and up to 35 inch tires for mild use.
2 door with 4 1/2 inch lift are recommended to use 1350 rear driveline. J.E. Reel Drivelines are designed to work with 2 1/2 inch and 4 1/2 inch lifts from most lift manufacturers. Lifts higher than 4 1/2 inch or long arm lifts must be measured for driveline length. It is best to measure all drivelines if possible.
The purchaser shall be responsible to determine all design and/or specification parameters and the suitability of any particular product for its intended use.
Note: JL 2018 Powertrain is installed at 9.25 degree. This means the Transfer Case rear output slopes down to rear axle and front output slopes up away from front axle.
This is especially important to consider on the 2018 model JL. Maximum Angle 1310 C.V. Less than 26 degree and 1350 C.V. Less than 32 degree.
WARNING: Cancer and Reproductive Harm
aFe POWER 49-48063 MACH Force-Xp 2-1/2" 409 Stainless Steel Front Muffler Assembly Exhaust System Jeep Wrangler (JK) 07-18 V6-3.6L/3.8L (2/4-Door)
Flowmaster Cat-back System 409S - Single Rear Exit - Force II - Mild Sound Jeep Wrangler 2007-2018