Name: Artec Industries JK DIY Steel Steering Kit Jeep Wrangler JK 2007-2018
Brand: Artec Industries
SKU: 153102285
Price: 549.99 USD

Upgrade your factory steering with this Heavy Duty 1-ton Steering featuring DOM Steel Tubing for high strength and low cost. Seamless DOM tubing has been used in our steering kits for many years and can take some serious abuse. It's a good low cost alternative to 7075 Aluminum.

Features:

1.5 inch thick .250 inch thick wall DOM Steel Tubing
Machined wrench flats on the tube adapters for easy tightening and a smooth look
Able to be flipped to above knuckle or under
Compatible with Right Hand Driver (RHD) vehicles
Features Heat Treated Chromoly Offset rod ends to clear differential cover and other vehicle components
Uses Massive 3/4 inch Grade 8 bolts for fastening to knuckles
Includes 3/4 inch stover locking nuts for worry and maintenance free fastening
All rod ends uses high misalignment spacers for increased rod end longevity and improved articulation
Drilling Of Knuckles TO 3/4 inch Required
Cutting Tubing To Length And Welding Tube Adapters Required

Includes:

Features:

2 RH and 1 LH - Offset XM 7/8 inch x 7/8 inch bore rod end for tie rod and drag link at the knuckle
1 LH - JMX 7/8 inch x 7/8 inch bore rod end for drag link at the pitman arm
2 RH and 2 LH - 7/8 inch x 14 tpi Jam Nuts
8 - 7/8 inch x 3/4 inch bore high misalignment spacers
4 - Grade 8 3/4 inch fine thread bolts
4 - 3/4 inch fine thread Stover locking nuts
1 - 1.5 inch OD .250 inch wall DOM Tubing 48 inch long for drag link
1 - 1.5 inch OD .250 inch wall DOM Tubing 54 inch long for tie rod

Note: Not for use with Stock or AEV wheels. Must be used with 17 inch wheel with 4.75 inch backspacing or less.

Proposition 65

$/!\ warning$ WARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Make Vehicle	Model	Submodel	Year	Engine	Notes
2007-2018 Jeep Wrangler	Wrangler		2007-2018

Who is Artec Industries?

Artec Industries is a company that was founded in 2003 in Tucson, Arizona, and is known as Artec Welding back then. The company started when the company's president Artie Nuttall bought a 1987 4Runner to join his wife's family offroad excursion.

As a talented welder himself, he started welding structural and decorative projects for various high-end commercial and residential projects. But his passion for offroading has never left him.

So in 2010, Artec Welding was rebranded as Artec Industries and started developing products for the automotive industry.

From Building Houses To Building Offroad Parts

The company used its experience in welding to create some of the best offroad parts available in the market today. They offer parts such as ultimate high steer arms, quart crates, but they are better known for their axle swap kits and axle trusses.

Continuous Company Growth

As more people patronize their products, there is a need for Artec to relocate to a bigger facility to accommodate their customers' growing demand. From a small garage, the company is now situated in a large facility in Salt Lake City, Utah, which is a strategic location that allows them to distribute their products more efficiently.

Purchase Artec Industries Products At Vivid Racing

If you are in the market for quality offroad parts, Artec Industries is the brand. Each part is carefully manufactured by the country's most talented craftsmen. It guarantees that you get the best product every time. To know more about Artec, visit Vivid Racing and check out their list of products that fit your specific need.