See more parts for your Ford Mustang

BMR Suspension Cradle Bushing Lockout Kit, Level 2 Red Ford Mustang 2015-2022

$209.95

BMR Suspension

Model #CB005R

Free Shipping

In Stock


Shopper Award

Reduce Wheelhop, bushing deflection, and cradle movement on your S550 Mustang with a Cradle Bushing Lockout Kit from BMR Suspension. Built from 6061-T6 billet aluminum, stainless steel, and heavy-duty 1 5/8-inch DOM steel tubing, BMR’s CB005 Cradle Bushing Lockout Kit is designed to nearly eliminate cradle bushing deflection, which is one of the biggest causes of wheelhop. BMR’s CB005’s billet aluminum upper bushing lockout rings capture the inner bushing sleeve (front and rear) and the outer lip of the bushing cup on the cradle (front).

The lower bushing locating washers (front) capture the bottom portion of the bushings’ inner sleeves. By capturing both parts of the bushings’ inner sleeves, movement on any plane (fore/aft, lateral, and vertical) is nearly eliminated. This assembly is completed with bolt-on cradle braces that replace the factory sheer plates. The large lug on the cradle side of the braces positively locates the cradle, ensuring it is perfectly centered under the car. The two bolts in the frame ensure the location of the cradle can’t change under any form of driving.

BMR Suspension designed the CB005 Cradle Bushing Lockout Kit for any application. This 100% bolt-on kit use existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Bushing Lockout Kit minimized bushing and cradle deflection with nearly no change in NVH. (During BMR’s testing, no change in NVH was observed without accompanying modifications.) The cradle brace also gives a convenient, rock-solid jacking point on the rear of the vehicle. This single kit helps address wheelhop, bushing deflection, and cradle movement, unlike other companies that make you buy multiple parts to get the entire “system.” You would spend well over double the price, and those “systems” don't provide you with the performance and value-per-dollar that the CB005 gives you. BMR Suspension’s CB005 Cradle Bushing Lockout Kit is the only part you need to affordably and effectively lessen wheelhop, bushing deflection, and cradle movement.

Throughout testing, BMR has seen about an 80%-90% reduction in fore/aft and lateral cradle bushing deflection. A car with no other mods and stock tires that isn’t driven overly hard is going to see a 90% or higher reduction, while a more race oriented S550 with sticky tires will see slightly less of a reduction. Launching the test vehicle at over 7,000 rpm on drag radials, BMR saw about an 80% reduction in bushing deflection. Through the testing BMR has seen a 95% or greater reduction in vertical deflection in all testing situations. When performance is a must, rely on BMR Suspension!

BMR Suspension’s CB005 Cradle Bushing Lockout Kit is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 1-2 hours. Proudly made in the U.S.A.!

Features:

  • 100% bolt-on design
  • Does not fit convertible models, please refer to part # CB010
  • No fabrication needed
  • Installs with simple hand tools
  • CNC-machined 6061-T6 billet aluminum upper bushing lockout rings
  • Laser-cut lower bushing support washers
  • CNC-formed stainless steel lower bushing support plates
  • 1 5/8-inch DOM steel tubing cradle braces
  • Positively locates the rear IRS Subframe
  • Greatly reduces stock subframe bushing deflection and wheel-hop
  • Uses factory bolt-holes and hardware
  • Adds a solid rear jacking point to each side of the vehicle
  • Durable powdercoat finish
  • Available in black hammertone and red powdercoat
  • Proudly designed in the U.S.A.
  • Proudly built in the U.S.A.
Fitment:
  • Ford Mustang 2015-2022
Installation:
  • For Installation Instructions. Click here.

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2015-2016
Ford Mustang
Base
  • Rear
2019-2020
Ford Mustang
Bullitt
  • Rear
2015-2020
Ford Mustang
EcoBoost
  • Rear
2015-2020
Ford Mustang
EcoBoost Premium
  • Rear
2015-2020
Ford Mustang
GT
  • Rear
2015
Ford Mustang
GT 50 Years Limited Edition
  • Rear
2015-2020
Ford Mustang
GT Premium
  • Rear
2019-2020
Ford Mustang
GT V8
  • Rear
2015-2020
Ford Mustang
Shelby GT350
  • Rear
2016-2020
Ford Mustang
Shelby GT350R
  • Rear
2020
Ford Mustang
Shelby GT500
  • Rear
2015-2017
Ford Mustang
V6
  • Rear
2017-2018
Ford Mustang
V8
  • Rear

Who is BMR Suspension?

When it comes to upgrading cars, the first thing that comes into a driver’s mind is either the engine performance or how the vehicle looks. But what some new car enthusiasts do not know is that by upgrading your vehicle’s suspension, you can have both goals in one go. By upgrading your vehicle’s suspension, you can improve the way it handles, which means better turning capability, and improve its stance giving it a more aggressive look.

BMR Suspension is a brand you can trust when it comes to quality suspension products.

How It Started

BMR Suspension is an aftermarket company that specializes in creating suspension parts for various American muscle cars. The company started in 1998 and has since provided enthusiasts with an affordable option for aftermarket suspension parts.

They may not be as old as some of the tenured suspension manufacturers in the world, but the company does not fall short when it comes to delivering quality products to its customers. Today, they have become the go-to brand for suspension upgrades and have a comprehensive list of parts for a wide range of vehicle applications.

Proudly Made in the USA

BMR products are 100% made in the USA at their manufacturing facility in Tampa, Florida. They use high-quality Chromoly steel, which is strong and durable. These are the same materials used in the roll cages of race cars. 

All of BMR’s products are fixture-welded to avoid any deformation, ensuring that all the end products are within specification. Since their manufacturing process is done in-house, the company is able to maintain its level of quality. Because of this, BMR Suspension has become one of the most go-to brands for enthusiasts who want the best.

Real-World Testing

BMR designs do not only look good on paper but produce actual performance gain. With dozens of project cars fitted with their product, all have shown remarkable improvement in terms of vehicle performance, may it be on the street-driven car or a full-blown drag car.

Purchase BMR products at Vivid Racing

Your vehicle’s suspension plays a significant role in your car’s performance and should not be overlooked. Hence, it is a must that you upgrade your suspension. 

For those who want to push their vehicle more, BMR is a company that can help you with it. BMR has got your every need covered with various suspension parts like control arms, links, bushings, and more. To know more about the company and what they can offer, visit Vivid Racing and check what the company has in store for you.



Warranty

BMR product applications are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser. Obligation under this warranty is limited to product replacement but not the reinstallation of the replacement product or other incidental costs. This warranty does not cover any product that has been subject to misuse, neglect, alteration, accident, or improper installation. Normal wear shall not be considered a defect under this warranty. All warranty adjustments are limited to replacement or credit of returned merchandise. This warranty specifically excludes impact damage or damage to powdercoat. BMR will issue a Returned Material Authorization number for every return. Returned goods will not be accepted without an RMA Number. BMR will ship the replacement product at no charge using UPS Ground. If the customer would like to upgrade the shipping method (for example, Next Day Air), the customer will be charged the difference in shipping cost.

BMR product is designed to be used with OEM product and other BMR products. BMR does not warranty our product for fitment with aftermarket product from other manufacturers. This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products. BMR products that are returned due to fitment issues with OEM components or BMR product will receive a full refund. BMR products that are returned due to fitment issues with aftermarket product will be subject to a 15% restocking fee.

Purchaser understands and recognizes that racing parts, equipment and services by or manufactured and/or sold by BMR, are subject to varied conditions due to the manner in which they are to be installed and used. The acceptability and suitability of any part sold or manufactured by BMR for a particular application is solely the purchaser's decision. BMR makes no warranties whatsoever, expressed, implied or written, THERE IS NO WARRANTY OF MERCHANTABILITY. The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved. Buyer agrees to indemnify and hold Seller harmless from any claim, action or demand arising out of or incident to Buyer's installation or use of products purchased from BMR.

Check out these other great products