See more parts for your Ford Mustang

BMR Suspension Torque Box Reinforcement Plate Kit Style Upper Only Ford Mustang 1979-2004

$59.95

BMR Suspension

Model #TBR002


Shopper Award

Increase stiffness and reinforce the torque boxed in your 1979-2004 Mustang with Upper Torque Box Reinforcement Braces from BMR Suspension. The Fox-chassis Mustangs were not known for being super strong. When large amounts of torque are applied to the chassis, the factory torque boxes are known to crack and rip. This causes all kinds of rearend alignment issues, poor performance, and unsafe driving conditions. Designed from CNC-laser cut, CNC-formed steel plate, BMR’s Upper Torque Box Reinforcement Braces are designed to bolt into the ’79-’04 Mustang chassis, adding strength to the upper control arm mounts. This means you can put as much power and torque to the wheels as possible, without fear of damaging this critical area of the chassis.

BMR’s TBR002 Upper Torque Box Reinforcement Braces are designed for street performance, drag race, and handling applications. This kit includes the braces and hardware to reinforce the upper rear control arm mounts (torque boxes). The plates bolt in using supplied hardware and require very little fabrication to complete. If your Mustang makes extreme amounts of power, or if your primary use is for racing, these parts can be welded in for extra strength. When performance is a must, rely on BMR Suspension!

BMR Suspension TBR002 Torque Box Reinforcement Braces come in a bare finish. Installation time is 2-3 hours. Proudly made in the U.S.A.

Features:

  • Fits 1979-2004 Mustang
  • Reduces upper control arm mount deflection
  • 100% bolt-in design
  • Increases the amount of horsepower and torque that can safely be applied to the chassis
  • CNC-laser cut, CNC-formed, MIG welded steel plate for precise fit
  • Includes all needed hardware
  • Bare finish
  • Proudly made in the U.S.A.
Fitment:
  • Ford Mustang 1979-2004
Installation:
  • For Installation Instructions. Click here.

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
1979-1984, 1994-2004
Ford Mustang
Base
  • Upper Rear
1981, 1997
Ford Mustang
Cobra
  • Upper Rear
1998-2003
Ford Mustang
Equipado
  • Upper Rear
1979-1982
Ford Mustang
Ghia
  • Upper Rear
1982-1983
Ford Mustang
GL
  • Upper Rear
1982-1983
Ford Mustang
GLX
  • Upper Rear
1982-2004
Ford Mustang
GT
  • Upper Rear
2004
Ford Mustang
GT Base
  • Upper Rear
2001
Ford Mustang
GT Bullitt
  • Upper Rear
2004
Ford Mustang
GT Equipado
  • Upper Rear
1984
Ford Mustang
GT-350 20th Anniversary
  • Upper Rear
1995
Ford Mustang
GTS
  • Upper Rear
1996-1997
Ford Mustang
High
  • Upper Rear
1982-1984
Ford Mustang
L
  • Upper Rear
1984-1993
Ford Mustang
LX
  • Upper Rear
1998
Ford Mustang
Semi-Equipado
  • Upper Rear
1984-1986
Ford Mustang
SVO
  • Upper Rear
1993-1999, 2001, 2003-2004
Ford Mustang
SVT Cobra
  • Upper Rear
2003
Ford Mustang
SVT Cobra 10th Anniversary
  • Upper Rear
1993, 1995, 2000
Ford Mustang
SVT Cobra R
  • Upper Rear
1983
Ford Mustang
Turbo GT
  • Upper Rear

Who is BMR Suspension?

When it comes to upgrading cars, the first thing that comes into a driver’s mind is either the engine performance or how the vehicle looks. But what some new car enthusiasts do not know is that by upgrading your vehicle’s suspension, you can have both goals in one go. By upgrading your vehicle’s suspension, you can improve the way it handles, which means better turning capability, and improve its stance giving it a more aggressive look.

BMR Suspension is a brand you can trust when it comes to quality suspension products.

How It Started

BMR Suspension is an aftermarket company that specializes in creating suspension parts for various American muscle cars. The company started in 1998 and has since provided enthusiasts with an affordable option for aftermarket suspension parts.

They may not be as old as some of the tenured suspension manufacturers in the world, but the company does not fall short when it comes to delivering quality products to its customers. Today, they have become the go-to brand for suspension upgrades and have a comprehensive list of parts for a wide range of vehicle applications.

Proudly Made in the USA

BMR products are 100% made in the USA at their manufacturing facility in Tampa, Florida. They use high-quality Chromoly steel, which is strong and durable. These are the same materials used in the roll cages of race cars. 

All of BMR’s products are fixture-welded to avoid any deformation, ensuring that all the end products are within specification. Since their manufacturing process is done in-house, the company is able to maintain its level of quality. Because of this, BMR Suspension has become one of the most go-to brands for enthusiasts who want the best.

Real-World Testing

BMR designs do not only look good on paper but produce actual performance gain. With dozens of project cars fitted with their product, all have shown remarkable improvement in terms of vehicle performance, may it be on the street-driven car or a full-blown drag car.

Purchase BMR products at Vivid Racing

Your vehicle’s suspension plays a significant role in your car’s performance and should not be overlooked. Hence, it is a must that you upgrade your suspension. 

For those who want to push their vehicle more, BMR is a company that can help you with it. BMR has got your every need covered with various suspension parts like control arms, links, bushings, and more. To know more about the company and what they can offer, visit Vivid Racing and check what the company has in store for you.



Warranty

BMR product applications are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser. Obligation under this warranty is limited to product replacement but not the reinstallation of the replacement product or other incidental costs. This warranty does not cover any product that has been subject to misuse, neglect, alteration, accident, or improper installation. Normal wear shall not be considered a defect under this warranty. All warranty adjustments are limited to replacement or credit of returned merchandise. This warranty specifically excludes impact damage or damage to powdercoat. BMR will issue a Returned Material Authorization number for every return. Returned goods will not be accepted without an RMA Number. BMR will ship the replacement product at no charge using UPS Ground. If the customer would like to upgrade the shipping method (for example, Next Day Air), the customer will be charged the difference in shipping cost.

BMR product is designed to be used with OEM product and other BMR products. BMR does not warranty our product for fitment with aftermarket product from other manufacturers. This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products. BMR products that are returned due to fitment issues with OEM components or BMR product will receive a full refund. BMR products that are returned due to fitment issues with aftermarket product will be subject to a 15% restocking fee.

Purchaser understands and recognizes that racing parts, equipment and services by or manufactured and/or sold by BMR, are subject to varied conditions due to the manner in which they are to be installed and used. The acceptability and suitability of any part sold or manufactured by BMR for a particular application is solely the purchaser's decision. BMR makes no warranties whatsoever, expressed, implied or written, THERE IS NO WARRANTY OF MERCHANTABILITY. The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved. Buyer agrees to indemnify and hold Seller harmless from any claim, action or demand arising out of or incident to Buyer's installation or use of products purchased from BMR.

Check out these other great products