See more parts for your Ford Focus

GFB DVX Diverter Valve Ford | Volvo | Porsche

$259.00 Sale:$233.10

Go Fast Bits

Model #T9654

Hurry Low Stock


Shopper Award

GFB's DVX takes the extremely popular DV+ Diverter Valve and adds dual venting outlets along with our patented Venting Bias Adjustment System. So not only do you get IMPROVED BOOST HOLDING and THROTTLE RESPONSE, you have total control over your BLOW-OFF SOUND VOLUME!

WHAT MAKES DVX DIFFERENT TO ANY OTHER VALVE THAT GOES "WHOOSH"?

  • The DVX is not just a noise maker (like BOV spacers) - by modifying the valve operation method it offers the same PERFORMANCE BENEFITS that the DV+ does.
  • It retains ECU CONTROL for the fastest possible operation.
  • No other blow off valve has the advantage of GFB's Venting Bias Adjustment, allowing you to alter the blow off sound simply by moving the adjustment lever.
  • Built to last.
GFB's DV+ design solves the longevity and boost leaking issues that are common with factory diverter valves, and also changes the operation method to "pilot actuation" to ensure better performance on stock or modified engines.

Furthermore, these benefits won't cost you the Earth! Rather than throwing the entire factory diverter valve system in the trash (like other manufacturer's "solutions"), the DV+ keeps what works, and replaces what doesn't.

WHAT DOES IT FIT?

The T9654 is a duel venting direct factory replacement for the pneumatic diaphragm type BPV (Bypass Valve) used on Ford, Volvo, Porsche, & Borg Warner Turbos

WHY NOT JUST USE A SPACER?

There are many "BOV spacers" on the market that make noise. However, they do this simply by using the factory diverter valve and redirecting the air to atmosphere. Therefore, the performance deficiencies of the factory diverter valve design remain, and furthermore, the flow capacity of the factory diverter is significantly reduced because of the small venting holes used in these BOV spacers.

ECU VS VACUUM CONTROL

Other BOV kits eliminate the ECU control entirely, using pure manifold vacuum control instead. Whilst there's nothing particularly wrong with this (that's how the majority of BOVs work), the ECU control is MUCH FASTER, able to detect and respond to much SMALLER THROTTLE TRANSITIONS and, since it's available, why wouldn't you use it?

WHAT'S SPECIAL ABOUT OUR VENTING BIAS SYSTEM?

GFB's patented Venting Bias Adjustment System is the only one of its kind in the world. By using an internal rotating sleeve, the opening of both the recirc port and the atmosphere port can be infinitely adjusted. This means that you're not stuck with a fixed 50/50 or 100% atmosphere venting ratio; you can change it to whatever you want! As an additional benefit, because the atmosphere outlet is a single large port rather than a series of small holes, the venting sound is much DEEPER AND LOUDER than it is with a BOV spacer.

THE BOTTOM LINE IS...

The DVX offers a TRUE PERFORMANCE improvement, INCREASED BOOST-HOLDING ability, and a blow-off sound that is COMPLETELY ADJUSTABLE from factory-silent to ear shattering!

Fitment:
  • Ford Focus ST L4.1999cc 2013-2015 | Porsche 911 GT2 RS H6.3600cc 2011 | Porsche 911 Turbo H6.3596cc 2007-2009 | Volvo C30 T5 L5.2521cc 2008-2012 | Volvo C70 T5 L5.2521cc 2006-2009 | Volvo S40 T5 L5.2521cc 2004-2009 | Volvo V50 T5 L5.2521cc 2005-2009

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2010-2011
Ford Focus
RS
5 Cylinder 2.5 Liter
2013-2018
Ford Focus
ST
4 Cylinder 2.0 Liter
2007-2011
Ford Focus
ST
5 Cylinder 2.5 Liter
2010-2012
Porsche 911

6 Cylinder 3.8 Liter
2010-2012
Porsche 911

2007-2011
Porsche 911

6 Cylinder 3.6 Liter
2007-2012
Volvo C30
T5
5 Cylinder 2.5 Liter
2006-2012
Volvo C70
T5
5 Cylinder 2.5 Liter
2004-2011
Volvo S40
T5
5 Cylinder 2.5 Liter
2005-2010
Volvo V50
T5
5 Cylinder 2.5 Liter

Who is Go Fast Bits?

It all started with the passion of John Adrian to create something that other aftermarket parts cannot produce. Most parts he encountered are either of low quality and are made out of inferior materials.

He decided to take matters into his own hands and started designing, testing, and developing parts that would help improve the performance of his vehicle. Using his own car as a personal testbed, he created products that other enthusiasts later noticed, which has become the start of Go Fast Bits.

Your Source of Performance Parts 

The company offers various performance parts such as boost controllers, blow-off valves, short shifters, pulley kits, and more. John Adrian also acts as the chief engineer of the company. Using his 35 years of experience manufacturing high-quality parts for the automotive industry that includes Original Equipment Manufacturers (OEM) parts, he was able to produce parts that meet the demands of his customers.

Quality Made Products

All their parts are meticulously made using the highest grade material available to ensure product durability and reliability. Each piece is manufactured to fit perfectly on the vehicle and tested to ensure optimum performance and nothing less.

Purchase Go Fast Bits Parts At Vivid Racing

If you are in the market for high-quality products that would help improve your vehicle's performance, then Go Fast Bits is a brand that you can trust. Their products are proven to deliver performance without compromising the daily drivability of your vehicle. Whether your car is used as a grocery getter or a weekend racer, Go Fast Bits has the right parts for you. 

To know more about the company, visit Vivid Racing and check out their parts list that fits your specific requirement.

Lifetime Warranty
We live in a throw-away society, conditioned by cheap products and frequently released new models to expect eventual failure and discard something when it stops working or is superseded. However, pride in workmanship and our commitment to quality means that when we put our name to something, we are also staking our reputation on it.

That’s why we back our products with the best Warranty in the business! You should expect a lifetime of use from a well-engineered product, so if your GFB product fails as a result of defective materials or faulty workmanship whilst you remain the original owner, we will repair or replace it.

If the fault occurred as a result of usage outside of the terms of the warranty, or you are not the original owner, fear not, we can still help you. You should never need to throw a GFB product away, as spare parts are available and won’t cost the earth.

To activate your warranty go to:
https://gfb.com.au/warranty/

Installation Instructions

Click to view the Installation Instructions here

Vendor Media File

Click to Download here

Vendor Media File

Click to Download here

Vendor Media File

Click to Download here

Check out these other great products