See more parts for your Ford Mustang GT

Girodisc Rear 2 Piece Floating Rotors Ford Mustang GT w/Brembo Calipers 11-14

$700.00

Girodisc

Model #A2-081

The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc rear rotors are approx 9.5lbs vs. 13lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.

The central hat section of Girodisc rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum.  The disc is made from Girodisc own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc.  The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.

The rotor and hat have a floating mount system, which utilizes 8 or 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to Girodisc own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by grade 12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.

Once the Girodisc system is in place, simply replace the cast iron rotor when needed.

Sold/priced in pairs

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2011-2014
Ford Mustang GT

Purchaser acknowledges the Product is for off-road racing use only. The nature of off road racing involves significant risk, and the conditions under which the Product is used and types of use of the Product are many depending on factors such as installation and use. Due to the inherent risk of the activity in which the Product is used, the Purchaser understands and agrees the Seller provides a limited warranty for the Product, specifically, the warranty is limited to the following specification: less than .0015” runout and less than .0003”disc thickness variation.

If Purchaser provides Seller with written notice of any condition inconsistent with the specification set forth above on or before six (6) months from the date of delivery and complies with the return requirements set forth in Section 6, then Seller will, at its election either:
  • Provide a replacement Product, or
  • Refund the purchase price.
This limited warranty does not cover, and Seller will not pay for, or provide, labor or materials that which may be necessary to remove a Product or install a replacement Product. This warranty is limited to the exchange of the Product or return of the purchase price.

Check out these other great products