See more parts for your Subaru Baja

GrimmSpeed CHASE JB400 Turbocharger Kit

$1,425.00

GrimmSpeed

Model #123005


Shopper Award

The GrimmSpeed Turbocharger Program started by recognizing a need in the market for a robust, quick-spooling and high-performing turbo. Design began from the ground up and took over 3 years of hard work, testing and development to introduce a product that we're proud to have carry The GrimmSpeed Name. The focus of this project was to offer a stock location OE replacement turbo, which when paired with GrimmSpeed supporting mods, allows enthusiasts to take full advantage of their EJ series turbo engine.

Both of our new turbocharger options feature state of the art proprietary compressors, turbines, CHRA's and wheel designs which maximize the power made on your EJ engine at two different price points. The overall design went through tedious gas flow test analysis, strenuous failure testing and engine pounding dyno/road testing, all to create the new standard for EJ engines: The GrimmSpeed Chase JB400 and Overtake BB500 Turbochargers!

The Chase JB400 Turbo is the smaller of our two offerings, this journal bearing unit is a perfect bolt-on to any stage 3 car, with which you are able to maximize the car's power potential with instant results through installation/tuning. The Chase JB400 features a robust 49lb compressor wheel, with a 53mm turbine wheel to offer quick response and power in the mid-range where you need it. The Chase Version was able to hit 440WHP and 460WTQ on The GrimmSpeed Stage 3-equipped 2020 STI with the addition of only tuning and fuel mods. The impressive bit is that the vehicle was able to hold over 400WTQ from 4150RPM, an RPM range where the stock turbo begins to lose power. Compared to a tuned stock turbo STI, the Chase 400 is able to produce 70 more horsepower and 66 more ft/lbs of torque.

Other Part Numbers:
GrimmSpeed #GRM123005

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2004-2006
Subaru Baja

2004-2017
Subaru Forester XT

2005-2009
Subaru Legacy

2005-2009
Subaru Outback

2004-2021
Subaru STI

2002-2014
Subaru WRX

GrimmSpeed Banner

Who is Grimmspeed?

Grimmspeed is an automotive aftermarket company that was founded in 2006 by Justin Grimm. They specialize in creating parts for the exhaust system for various automotive vehicles. Grimm has always had this passion for cars and had always wanted to improve his vehicle’s performance. After numerous trials, he was able to perfect his craft and later on decided to turn it into his career. Today, they have become one of the leading brands when it comes to producing high-performance exhaust systems.

Expanding their Product Offering

The company initially manufactured parts for Subaru. But as the company expanded, they started offering parts for other brands such as Ford, Mitsubishi, Hyundai, and Mazda. They now offer parts such as intercoolers, intake, exhaust, engine pulleys, gaskets, boost controllers, phenolic spacers and so much more.

Continuous Product Development

Grimmspeed never stops in finding ways to produce innovative products and is always on the push to keep their products up to date. With the rapid change in automotive technology, it is a must that their product is able to adapt to this change for it to satisfy the demand of its users. This is the reason why the company has gained the trust of many tuners all around.

Purchase Grimmspeed Product at Vivid Racing

Built by an enthusiast for fellow enthusiasts.

If you want a product that is designed to improve the performance of your vehicle, then Grimmspeed is the brand for you. To know more about Grimmspeed, visit Vivid Racing and check out their list of products that would fit your specific needs.





 



What is the GrimmSpeed Limited Lifetime Warranty Policy?GrimmSpeed-branded products are warrantied to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product.

If a GrimmSpeed-branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it, at our discretion. Only original, unaltered and unmodified materials and workmanship are covered by this policy and you must provide proof of original purchase to be fully covered. This warranty does not cover damage caused by accidents, improper care/installation, negligence, reasonable/normal wear and tear, or the natural breakdown of colors, coatings and materials over extended time and usage. GrimmSpeed cannot be held liable for any damage to your vehicle and/or its components caused by failures associated with the previous statement. Damage not covered under warranty may be considered for repair for a reasonable rate or a reduced price for a replacement piece (a fee will be charged for return shipping).This warranty is available in the United States and Canada.

This warranty does not cover products sold by GrimmSpeed that are not GrimmSpeed-branded products.

This warranty gives you specific legal rights; you may have other rights, which vary from state to state.

The GrimmSpeed website sells GrimmSpeed-branded discontinued, special make-up, and slightly blemished products at significant discounts as 'factory seconds' products. This warranty does not necessarily cover any products purchased as 'factory seconds'. The GrimmSpeed Warranty Department may repair 'factory seconds' products for a reasonable charge and a fee will be charged for return shipping.

Is normal wear and tear covered?

The GrimmSpeed Limited Lifetime Warranty covers manufacturing defects in materials and workmanship, but it does not cover normal wear and tear over extended time and usage. Wear and tear is damage that naturally and inevitably occurs as a result of normal use. Regardless of how carefully you use, or how well you care for your GrimmSpeed product, like all performance parts it will eventually begin to show age and wear. Common examples of wear and tear that would not be covered under the limited lifetime warranty include denting, abrasions or scratches, color changing from heat in exhaust components and so on, less common examples include flex-section wear and fatigue cracks over an extended period of time.

How do I send my product in for warranty?

The first step is to contact support@grimmspeed.com and let them know of your issues/concerns. From there, a customer service representative will personally work with you to determine the best path forward. For the quickest service, please include your contact information and photos of the failed product along with a copy of your receipt/invoice in your initial email.

Upon request from your customer service representative, your product must be returned directly to The GrimmSpeed Warranty Department at 650 Taft St NE, Suite 300, Minneapolis, MN, 55413. All shipping to Warranty must be pre-paid and insured. GrimmSpeed cannot be liable for lost in-bound packages.

Check out these other great products