$529.99
Model #3045-325-B
1" diameter tubular bar for incredible strength, resistance to roll and light weight (saves 8-10lbs over the competition with no loss of roll resistance)
Moser Engineering 9" Rear ends manufactured after early 2002 use 3" Axle Tubes. Rear ends manufactured prior to early 2002 use 3.25" axle tubes. Please verify diameter before ordering.
UMI's G-Body Anti-Roll bar is designed to help your hot rod leave the line flat and straight. The bars are manufactured from light weight 1" diameter tubular steel and feature three different rates (street/strip, strip with drag radials and full slick settings). UMI's tried and true CNC machined clamping system allows differential housing mounting on 2.75", 3" and 3.25" diameter housings. These can be bolted on, or welded for additional security. Since your car will be launching hard, we recommend welding. The double shear chassis mounts are held in place byur 3/8" eners and feature our exclusive reinforcement plate up top to help distribute the load. Drilling through the crossmember is required and a template /instructions are included. The house made hex adjuster allows pre-loading of the bar when used for drag applications so your car leaves straight no matter how much power you throw at it. This G-Body drag bar is available in beautiful red or black powder coat. Manufactured with pride in PhilipsbuUSA.
WARNING: Cancer and Reproductive Harm
Make Vehicle | Model | Submodel | Year | Engine | Notes |
---|---|---|---|---|---|
1978-1987 Buick Regal |
Regal | 1978-1987 | |||
1978-1987 Chevrolet El Camino |
El Camino | 1978-1987 | |||
1978-1983 Chevrolet Malibu |
Malibu | 1978-1983 | |||
1978-1988 Chevrolet Monte Carlo |
Monte Carlo | 1978-1988 | |||
1978-1981 Oldsmobile Cutlass |
Cutlass | 1978-1981 | |||
1978-1984 Oldsmobile Cutlass Calais |
Cutlass Calais | 1978-1984 | |||
1982-1988 Oldsmobile Cutlass Ciera |
Cutlass Ciera | 1982-1988 | |||
1980-1983 Oldsmobile Cutlass Cruiser |
Cutlass Cruiser | 1980-1983 | |||
1978-1980, 1985-1987 Oldsmobile Cutlass Salon |
Cutlass Salon | 1978-1980, 1985-1987 | |||
1978-1988 Oldsmobile Cutlass Supreme |
Cutlass Supreme | 1978-1988 | |||
1982-1986 Pontiac Bonneville |
Bonneville | 1982-1986 | |||
1978-1987 Pontiac Grand Prix |
Grand Prix | 1978-1987 |
UMI Performance is an aftermarket company that specializes in building high-quality suspension parts. But before they were known as a suspension manufacturer, they manufactured precision parts for major brands such as Corning Asahi, Sony, and Bell+Howell. They may have shifted industries, but their dedication to creating quality products has remained the same.
All of their products are made in-house, which allows them to control every aspect of their products. 100% made in the USA, they can maintain their high standards and create suspension parts that can tackle any street, whether it be the fast corners of a race track or the bumpy road to your grocery store.
UMI Performance actively participates in various racing disciplines since most of their product engineers and sales team are racers. Because of this, they can test their products through real-life racing scenarios, which helps them gather data that can help improve their products.
Each product is designed to replace factory-installed parts without any significant modification. It is carefully measured to ensure that it would fit perfectly into the vehicle and comes with a step-by-step instructional manual, giving their customers a hassle-free installation experience.
If you are in the market for high-quality suspension parts for your vehicle, then look no further, as UMI is the brand for you. To know more about UMI, visit Vivid Racing and check out their list of products that fit your specific need.