$539.95
Model #529543607493
The Kawasaki Teryx KRX 1000 exhaust is available as a Slip-On system in our Titan series.
The Titan Slip-On for this machine sheds significant weight from the exhaust system while adding the signature HMF sound and performance to an already well built engine and chassis. During development the R&D team found that the stock head pipe from Kawasaki was extremely well designed and paired well with the Titan HMF silencer eliminating the need for a full system.
The single 5" stainless steel silencer picks up 5 hp and 3 ft-lbs of torque for both the Titan XL (loud) and Titan QS (quiet) systems along with proper tuning. The stock silencer weighs in at 26.5 lbs while the HMF system including brackets is less than 10 lbs, saving over 15 lbs of weight with just a slip-on.
Titan Series Slip-on:
The Titan is a stainless steel system built to withstand extreme temperatures, increase torque and horse power, add durability and improve the overall exhaust tone. This is the system you've been searching for. This is the Titan.
Virtually the entire exhaust system is built from 304 Stainless Steel - 5" ⌀. It doesn't readily corrode, rust or stain and it can reliably withstand the extreme temperatures generated from high performance offroad vehicles.
The sound from the Titan is a deep and aggressive, adding depth to the machine's sound. This relieves some of the high pitch sounds created from the stock system. The Titan-QS features a mechanical core design that produces incredible horse power while keeping the sound levels to a minimum.For the riders out there craving maximum horse power with maximum volume, the Titan-XL features an unrestricted internal core design that produces maximum horse power at an incredibly loud volume.
These exhaust shells are big, and so is the performance they create. The 5" inch diameter exhaust shells house an internal exhaust core that creates maximum airflow. When stacked into a dual system, it creates even more power and performance while improving sound.
Features:
WARNING: Cancer and Reproductive Harm
| Make Vehicle | Model | Submodel | Year | Engine | Notes |
|---|---|---|---|---|---|
|
2020 Kawasaki Teryx |
Teryx | 2020 |
HMF, also known as Hans Motorrad Factory, is a company that started back in 1997 in Cleveland, Ohio. It specializes in manufacturing high-performance parts for various ATVs and UTVs. When the company started, it initially offered exhaust parts for the Honda RC-51 and Suzuki GSX-R Motorcycles. A few years later, the demand for performance parts for ATVs started growing and HMF was already in the position to feel it in. Today, they are one of the leading brands in the market and is sought after by enthusiasts from all over.
HMF also produced parts that are used in motorsport racing. Being able to produce race-winning vehicles, it allowed them to learn the ins and outs of racing and develop parts that would help bring the full potential of the vehicle. Because of their winning results, the company became associated with competitive offroad racing.
The company has always pushed itself in developing its products. It heavily invests in its research and development in order to manufacture parts that would give you a competitive edge. Each product is designed with performance in mind, so you can be sure that their parts are not just about looking good, it means business as well.
If you are in the market for high-quality parts that perform, HMF is the brand for you. These are parts designed and built by actual racers so you are sure that what you are getting is the real deal. To know more about HMF, visit Vivid Racing and check out the list of products that fit your specific needs.
The HMF 2-year limited warranty applies to manufacturing defects only. Any exhaust that is damaged by misuse, incorrect installation, modification, incorrect air/fuel mixture, impact or crash damage will not be covered by the warranty. Any exhaust that is not covered by the warranty can be repaired by HMF at the customers expense.
Shipping damage must be reported to HMF within 1 week of receipt. Shipping damage is not the responsibility of HMF. HMF will assist you in filing a claim with the shipper so you may be reimbursed for the damage.
HMF will not be responsible for any damage caused to the exhaust or any other component due to incorrect air/fuel mixture. It is the end customers responsibility to ensure that their machine is properly tuned.
All exhaust must be free of all mud & debris or a $30 cleaning fee will be charged. Customer is responsible for shipping charges to HMF.
Equipment
HMF Engineering warrants the HMF Equipment product line for one year from the date of purchase. Warranty coverage is limited to manufacturing defects only. Typical wear and breakage does not apply to the limited product warranty. If the product shows evidence of usage or installation contrary to product descriptions or instructions, subjection to improper handling/packaging, or abuse the limited product warranty becomes invalid.
Any product received and found to be damaged, faulty, or missing components must not be installed and reported to HMF Engineering within one week of receipt. Shipping damage is not the responsibility of HMF. HMF will assist customers in filing a claim with the shipper so you may be reimbursed for the damage.
The liability to HMF Engineering for losses or damages arising out of any cause whatsoever is limited to repair or replacement of the product(s), or at our own discretion, a refund of the purchase price. HMF Engineering shall not be liable for any consequential or incidental damages. Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above exclusion or limitation may not apply to you.
