See more parts for your Buick Century

BRExhaust Exhaust Muffler Left

$95.22

BRExhaust

Model #100-1757

In Stock


Shopper Award

This BRExhaust replacement exhaust is engineered based on the original OEM design to ensure reliability, durability and performance. The ease of installation will save you time and effort, getting you back out on the road sooner. Each muffler features thicker hangers for added strength and fully welded, perforated tubes to guarantee a long service life.

Features:

  • Inlet Location: Offset
  • Outlet Location: Offset
  • Series: Direct-Fit Exhaust
  • Welded Hanger: No

Other Part Numbers:
BRExhaust #mag100-1757

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
1987
Buick Century

4 Cylinder 2.5 Liter
  • If Welded Assembly- Replace All Required Parts
1980-1983
Buick Electra

6 Cylinder 4.1 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1983
Buick LeSabre

6 Cylinder 3.8 Liter
  • With California Emissions
1980-1983
Buick LeSabre

6 Cylinder 4.1 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1981-1982
Buick LeSabre

6 Cylinder 3.8 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1982
Buick LeSabre

8 Cylinder 4.4 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1980
Buick LeSabre
Base
6 Cylinder 3.8 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1980
Buick LeSabre
Limited
6 Cylinder 3.8 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1970-1972
Buick Skylark

8 Cylinder 5.7 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1980-1982
Cadillac DeVille

6 Cylinder 4.1 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1980-1982
Cadillac Fleetwood

6 Cylinder 4.1 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1981
Chevrolet Bel Air

8 Cylinder 4.4 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1970-1972
Chevrolet Bel Air

6 Cylinder 4.1 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1970-1972
Chevrolet Biscayne

6 Cylinder 4.1 Liter
  • Single Exhaust
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1980-1983
Chevrolet Caprice

6 Cylinder 3.8 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1980-1982
Chevrolet Caprice

8 Cylinder 4.4 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1987
Chevrolet Celebrity

4 Cylinder 2.5 Liter
  • If Welded Assembly- Replace All Required Parts
1970-1972
Chevrolet Chevelle

8 Cylinder 5.0 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1970-1972
Chevrolet Chevelle

6 Cylinder 4.1 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1968-1969
Chevrolet Chevelle

8 Cylinder 5.7 Liter
  • Single Exhaust
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1968-1969
Chevrolet Chevelle

8 Cylinder 5.0 Liter
  • Single Exhaust
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1968
Chevrolet Chevelle

8 Cylinder 5.4 Liter
  • Single Exhaust
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1968-1972
Chevrolet El Camino

8 Cylinder 5.0 Liter
  • with Oldsmobile Engine
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1970-1972
Chevrolet El Camino

6 Cylinder 4.1 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1980-1983
Chevrolet Impala

6 Cylinder 3.8 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1980-1982
Chevrolet Impala

8 Cylinder 4.4 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1970-1972
Chevrolet Impala

6 Cylinder 4.1 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1992-1995, 1997
Ford Crown Victoria

8 Cylinder 4.6 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
1992-1996
Ford Crown Victoria

8 Cylinder 4.6 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Modifications and/or Additional Parts Required
1979-1986
Ford LTD

8 Cylinder 5.8 Liter
  • Single Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1979-1986
Ford LTD

8 Cylinder 5.0 Liter
  • Single Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1980-1986
Ford LTD

8 Cylinder 5.8 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1983-1986
Ford LTD

8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1981
Ford LTD

8 Cylinder 4.2 Liter
  • Single Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1990-1991
Ford LTD Crown Victoria

8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Modifications and/or Additional Parts Required
1990-1991
Ford LTD Crown Victoria

8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
1990-1991
Ford LTD Crown Victoria

8 Cylinder 5.8 Liter
  • with Police Package
  • with Dual Exhaust
  • Require Part # DN101
  • &
  • 104-1133
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
1987-1989
Ford LTD Crown Victoria

8 Cylinder 5.0 Liter
  • Single Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1989
Ford LTD Crown Victoria

8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1989
Ford LTD Crown Victoria

8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1987-1988
Ford LTD Crown Victoria

8 Cylinder 5.8 Liter
  • Single Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1987-1988
Ford LTD Crown Victoria

8 Cylinder 5.8 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1987-1988
Ford LTD Crown Victoria

8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1990
Lincoln Continental

6 Cylinder 3.8 Liter
  • Requires Part # [DN96]
  • Split Date From: From 11/1/1989
1980
Lincoln Continental

8 Cylinder 5.8 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1980
Lincoln Continental

8 Cylinder 5.0 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1980-1983
Lincoln Mark VI

8 Cylinder 5.0 Liter
  • Single Exhaust
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1982-1983
Lincoln Mark VI

8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1980
Lincoln Mark VI

8 Cylinder 5.8 Liter
  • Single Exhaust
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1991-1997
Lincoln Town Car

8 Cylinder 4.6 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Modifications and/or Additional Parts Required
1991-1997
Lincoln Town Car

8 Cylinder 4.6 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
1990
Lincoln Town Car

8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Modifications and/or Additional Parts Required
1990
Lincoln Town Car

8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
1981-1989
Lincoln Town Car

8 Cylinder 5.0 Liter
  • Single Exhaust
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1982, 1985-1989
Lincoln Town Car

8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1983-1984
Lincoln Town Car

8 Cylinder 5.0 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1992-1997
Mercury Grand Marquis

8 Cylinder 4.6 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
1990-1991
Mercury Grand Marquis

8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
1990-1991
Mercury Grand Marquis

8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Single Rear Wheels
  • Modifications and/or Additional Parts Required
1981-1986, 1989
Mercury Grand Marquis

8 Cylinder 5.0 Liter
  • Single Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1983-1986, 1989
Mercury Grand Marquis

8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1989
Mercury Grand Marquis

8 Cylinder 5.8 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1987-1988
Mercury Grand Marquis
GS
8 Cylinder 5.0 Liter
  • Single Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1987-1988
Mercury Grand Marquis
GS
8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1987-1988
Mercury Grand Marquis
LS
8 Cylinder 5.0 Liter
  • Single Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1987-1988
Mercury Grand Marquis
LS
8 Cylinder 5.0 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1981-1982
Mercury Marquis

8 Cylinder 5.0 Liter
  • Single Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1981-1982
Mercury Marquis

8 Cylinder 4.2 Liter
  • Single Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1981
Mercury Marquis

8 Cylinder 5.8 Liter
  • Single Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1980-1981
Mercury Marquis

8 Cylinder 5.8 Liter
  • with Dual Exhaust
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1979-1980
Mercury Marquis

8 Cylinder 5.8 Liter
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1979-1980
Mercury Marquis

8 Cylinder 5.0 Liter
  • If Welded Assembly- Replace All Required Parts
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1970-1971
Oldsmobile 442

8 Cylinder 7.5 Liter
  • with Spout
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1968-1969
Oldsmobile 442

8 Cylinder 6.6 Liter
  • with Spout
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1981-1983
Oldsmobile 98

6 Cylinder 4.1 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1970-1972
Oldsmobile Cutlass

8 Cylinder 7.5 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1970-1971
Oldsmobile Cutlass

8 Cylinder 7.5 Liter
  • with Spout
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1970
Oldsmobile Cutlass

8 Cylinder 5.7 Liter
  • Excluding with Outside Air Induction
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1968-1969
Oldsmobile Cutlass

8 Cylinder 5.7 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1968
Oldsmobile Cutlass

8 Cylinder 6.6 Liter
  • with Spout
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1967
Oldsmobile Cutlass

8 Cylinder 5.4 Liter
  • Use with Part # [104-2001]
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1967
Oldsmobile Cutlass

6 Cylinder 4.1 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1965-1966
Oldsmobile Cutlass
Base
8 Cylinder 5.4 Liter
  • Use with Part # [104-2001]
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1965
Oldsmobile Cutlass
Base
8 Cylinder 6.6 Liter
  • Use with Part # [104-2001]
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1966
Oldsmobile Cutlass
Holiday
8 Cylinder 5.4 Liter
  • Use with Part # [104-2001]
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1965
Oldsmobile Cutlass
Holiday
8 Cylinder 6.6 Liter
  • Use with Part # [104-2001]
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1987
Oldsmobile Cutlass Cruiser

4 Cylinder 2.5 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1971-1972
Oldsmobile Cutlass Supreme

8 Cylinder 7.5 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1971
Oldsmobile Cutlass Supreme

8 Cylinder 7.5 Liter
  • with Spout
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1970
Oldsmobile Cutlass Supreme

8 Cylinder 5.7 Liter
  • Excluding with Outside Air Induction
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1968-1969
Oldsmobile Cutlass Supreme

8 Cylinder 5.7 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1967
Oldsmobile Cutlass Supreme

8 Cylinder 5.4 Liter
  • Use with Part # [104-2001]
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1983
Oldsmobile Delta 88

6 Cylinder 3.8 Liter
  • With California Emissions
1981-1982
Oldsmobile Delta 88

8 Cylinder 4.3 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1980-1982
Oldsmobile Delta 88

6 Cylinder 3.8 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1981-1982
Oldsmobile Delta 88

8 Cylinder 4.4 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1970, 1972
Oldsmobile F85

8 Cylinder 7.5 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1970
Oldsmobile F85

8 Cylinder 5.7 Liter
  • Excluding with Outside Air Induction
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1970
Oldsmobile F85

8 Cylinder 7.5 Liter
  • with Spout
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1968-1969
Oldsmobile F85

8 Cylinder 5.7 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1967
Oldsmobile F85

8 Cylinder 5.4 Liter
  • Use with Part # [104-2001]
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1967
Oldsmobile F85

6 Cylinder 4.1 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1965-1966
Oldsmobile F85
Base
8 Cylinder 5.4 Liter
  • Use with Part # [104-2001]
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1966
Oldsmobile F85
Base
6 Cylinder 4.1 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1965
Oldsmobile F85
Base
8 Cylinder 6.6 Liter
  • Use with Part # [104-2001]
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1965-1966
Oldsmobile F85
Deluxe
8 Cylinder 5.4 Liter
  • Use with Part # [104-2001]
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1966
Oldsmobile F85
Deluxe
6 Cylinder 4.1 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1966
Oldsmobile F85
Holiday
8 Cylinder 5.4 Liter
  • Use with Part # [104-2001]
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1966
Oldsmobile F85
Holiday
6 Cylinder 4.1 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1987
Pontiac 6000

4 Cylinder 2.5 Liter
  • Rear
  • If Welded Assembly- Replace All Required Parts
1968-1969
Pontiac Beaumont

8 Cylinder 5.7 Liter
  • Single Exhaust
  • Station Wagon
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1968-1969
Pontiac Beaumont

8 Cylinder 5.0 Liter
  • Single Exhaust
  • Station Wagon
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1968
Pontiac Beaumont

8 Cylinder 5.3 Liter
  • Single Exhaust
  • Station Wagon
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Require Part # DN101
  • &
  • 104-1133
1980-1981
Pontiac Bonneville

6 Cylinder 3.8 Liter
  • Tail Pipe Exits In Rear
1981
Pontiac Catalina

6 Cylinder 3.8 Liter
  • If Welded Assembly- Replace All Required Parts
1981
Pontiac Catalina

8 Cylinder 4.4 Liter
  • If Welded Assembly- Replace All Required Parts
1980
Pontiac Catalina

8 Cylinder 4.3 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1980
Pontiac Catalina

6 Cylinder 3.8 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1980
Pontiac Catalina

8 Cylinder 4.4 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1981
Pontiac Catalina
Base
8 Cylinder 4.3 Liter
  • If Welded Assembly- Replace All Required Parts
1981
Pontiac Laurentian

8 Cylinder 4.3 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1981
Pontiac Laurentian

6 Cylinder 3.8 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1970-1972
Pontiac LeMans

6 Cylinder 4.1 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]
1980-1982
Pontiac Parisienne

8 Cylinder 4.4 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1981
Pontiac Parisienne

8 Cylinder 4.3 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1981
Pontiac Parisienne

6 Cylinder 3.8 Liter
  • Universal Muffler - May Require Cutting, Welding, or Clamps
  • Aluminized
1970
Pontiac Tempest

6 Cylinder 4.1 Liter
  • Models with Heat Shields, Use Part # [103-1045] Shield
  • &
  • (2) Part # [102-5531] Straps
  • Requires 104-1133
  • Requires Part # [DN101]

BRExhaust Banner

Who is BRExhaust?

BRExhaust is an aftermarket company that distributes and manufactures OE replacement exhaust systems. The company spent years as a trusted supplier of exhaust products to the import vehicle market. Today, the company is recognized as one of the leading exhaust suppliers and is trusted by many automotive brands and professionals alike.

Replacement Exhaust Expert

BRExhaust has been a part of the MagnaFlow Group since 2017. MagnaFlow is one of the top brands when it comes to exhaust systems, and becoming part of this group means BRExhausts shares the same quality and standard the company is known for.

As of 2020, BRExhaust has established its brand as the premier OE replacement exhaust component resource for all import and domestic vehicles.

Quality-Made Products

The company aims to provide quality products to all of its customers. By consistently meeting their customer's expectations in product quality, performance, delivery, and services, BRExhaust has gained the trust of thousands of enthusiasts and car aficionados worldwide.

BRExhaust utilizes the advancement in technology in order for them to create products that can adapt to the ever-changing automotive trend. It has established innovative processes and product lines that show a high degree of corporate responsibility.

Purchase BRExhaust At Vivid Racing

If you are in the market for high-quality exhaust systems that fit perfectly into your vehicle, then stop second-guessing and get yours from BRExhaust. To know more about BRExhaust and what they can offer, visit Vivid Racing and check out their list of products that fit your specific requirement.

BRExhaust Warranty

LIMITED LIFETIME WARRANTY FOR SELECTED EXHAUST

All mufflers and muffler assemblies (welded units that contain a muffler, but are not part of an exhaust system kit) are warranted for the “life of the vehicle” to the original purchaser, subject to the Standard Warranty terms and conditions listed below. This warranty is not transferable and ceases immediately upon change of vehicle ownership. This policy applies to all units shipped from manufacturer’s location on or after May 1, 2020 and is not retroactive.

 

STANDARD WARRANTY FOR EXHAUST

BRExhaust warrants all exhaust system parts and exhaust system kits, against defects in workmanship and material for a period of 2 years. This warranty shall not apply to any exhaust system part which has been subject to abnormal use, negligence, or blown out by “backfire”, accident, nor does it cover labor charges or any other claim incidental to replacing a defective part. This warranty only applies to purchases from approved reseller or directly from BRExhaust. All warranty claims must be accompanied by a purchase receipt or invoice.

All claimed defective merchandise is to be held or returned freight prepaid for the inspection by BRExhaust who will make the determination of whether or not merchandise is covered under warranty. BRExhaust does not warranty modified exhaust or emission systems or converters that have been modified or installed on a vehicle for which they have not been cataloged. Any warranties implied in fact or by law (which includes, among others, warranties of merchantability and warranties of fitness for purpose) shall only be valid for one year from the date of purchase of such exhaust system parts.

 

WARRANTY FOR VFM EXHAUST, FLEX, AND HARDWARE

Same terms and conditions apply as listed under Standard Warranty for Exhaust except that warranty period is for one year on all units.

 

 CATALYTIC CONVERTER WARRANTY

BRExhaust catalytic converters are warranted to be free from defects in material and workmanship. All BRExhaust catalytic converters are designed and manufactured to meet the emissions performance requirements specified by the Federal EPA and/or the California Air Resource Board (CARB). For Federal/ EPA Catalytic Converters: When the vehicle is properly maintained, the catalytic converter is warranted to meet such requirements for 25,000 miles from the date of installation. For California Catalytic Converters: When the vehicle is properly maintained, the catalytic converter is warranted to meet such requirements for 5 years or 50,000 miles, whichever comes first, from the date of installation. BRExhaust further warrants catalytic converter’s external shell for 5 years or 50,000 miles, whichever comes first, from date of installation.

The BRExhaust warranty is void if the catalytic converter is not properly installed on the vehicle for which it is designed and cataloged, if it has been altered or repaired, or if it has been damaged by negligence, accident or mishandling. BRExhaust assumes no liability for catalytic converter failures related to engines not operating within original equipment specifications, vehicles with an illegal add-on devise or modified part, or the use specialty fuels, lubricants or additives.

BRExhaust warrants end-pipes and other exhaust attachments (those being attached during the original manufacturing process and otherwise unaltered during installation) against defects in material and workmanship, for 2 years, from date of installation, and the Standard Warranty for Exhaust applies to these pieces

For sales in California and installations on vehicles registered in California, this warranty covers the full replacement cost, including parts and labor, for all other sales, this warranty provides a replacement part only, provided that the part is returned to an authorized dealer, along with the proof of purchase and properly completed warranty claim certificate. If the warranty claim relates to emissions performance, proof of failure of emissions inspection test or presence of an OBD-II Diagnostic Trouble Code indicating

Insufficient Catalyst Efficiency must be provided. Documentation showing the vehicle’s current state of tune is also required. BRExhaust reserves the right to determine what constitutes the vehicle’s proper operating condition. No other warranty expressed or implied, including merchantability, applies to the catalytic converter, nor is any person or company authorized to assume any other warranty. BRExhaust does

not assume any responsibility for any consequential damages occasioned by the catalytic converter, or inconvenience or interruption in any operation. The warranty gives you specific legal rights. You may also have other rights that vary from state to state. There is no warranty on 1.) clogged converters, 2.) melted or contaminated substrates, or 3.) noise levels.

Check out these other great products