Decked 6.9" 2200 lbs 100% Extension CargoGlide Truck Bed Slides Full-Size Truck | Cargo Van

The DECKED CargoGlide truck bed sliding tray is a sliding tool box that makes loading, unloading and accessing your tools and gear easy, safe and fast. Never climb into the bed of your truck to retrieve your gear ever again.

The tray rolls on heavy-duty bearings actuated by a single-handed latch which allows you to smoothly slide out and retrieve your tools and materials.

The toughest and most durable bed slide on the market. Built from heavy gauge, powder coated American steel and industrial grade marine plywood (coated with a thermoplastic top sheet), the CargoGlide truck bed slide can take all of the use and abuse of the jobsite and the environment.

Load it up with compressors, welders, tool boxes, you name it. All of your work items slide right out to you every time.

Features:

• CargoGlide fits most full-size or midsize trucks and is available in either a 70% or 100% extension (amount the tray slides out of the vehicle bed).
• The tray can carry up to 2,200 lbs-choose between a 1,000 lbs, 1,500 lbs, or a max 2,200 lbs payload (depending on vehicle).
• One truck bed slide with all your big heavy stuff on top plus two full bed-length, drawers with secured tools and gear sliding underneath = a match made in heaven.
• Easily slide out up to 2,200 lbs of gear with the flick of a switch. Multiple cargo stops allow you to select just how far out you want it to extend
• Slide thrust bearings keep the loaded tray from binding if parked on an angled slope. These bearings make the CargoGlide roll smoothly no matter how much torque you may put it under.
• The perimeter of the CargoGlide tray has interior and exterior channels for infinitely adjustable cargo tie down locations. Comes standard with [4] marine grade galvanized tie down loops. Accessory tie downs available for ratchet straps or other webbing to secure your load.
• 30 min. is all you need. CargoGlide comes preassembled. Simply drill according to instructions, install hardware and bolt it down. You only need a couple of drill bits and a socket set.

• [4] adjustable marine grade galvanized tie down eyebolts for securing cargo. Full perimeter interior and exterior channels for adjustable cargo tie down locations.
• All 100% extension CargoGlides come with the High Sides Standard Kit.

• Extension : 100% extension Full-bed length tray
• Payload : 2,200 lbs
• Features :
• Single hand latch operation
• [7] cargo stops
• Includes [4] heavy duty tie downs
• Full perimeter tie down track
• Dimension :
• 5.5" height from truck bed to top of tray
• 9" total height
• 13.5" height w/ High Sides
• 80" total length
• 48" total width
• Weight : xxx lbs lbs
• Construction :
• Powder coated USA steel frame
• Industrial ¾" Marine Plywood deck
• Coated with a thermoplastic top sheet
• Aluminum sidewalls
• [14] double row roller sealed bearings
• [12] side thrust bearings for smooth operation on uneaven surface
• Install Time : ≤ 30 min.; comes preassembled
• Compatibility :
• X Not compatible with a DECKED Drawer System
• X Not compatible with a DECKED Tool Box

• For Instructions CLICK HERE

• Ford Super Duty 1999+
• GM Sierra | Silverado 2500 & 3500 1988+
• GM Sierra | Silverado 2500 & 3500 2020+ New "wide" bed width
• Ford Transit 2014+
• Chevrolet Express 1996+
• GMC Savanna 1996+
• MB | Dodge | Freightliner Sprinter 2007+
• RAM Promaster Extended wheel base 2014+

• Some tailgates don't lay flat when open, which will cause binding when extending the CargoGlide tray. General rule: the highest point on your tailgate when open must be less than 3/4" above your truck bed floor to ensure compatibility. Before drilling into your bed, test the fit according to our install instructions. We offer easy-to-install spacer kits, tailgate cable drop links, and/or shoulder bolts for current GMC/Chevy trucks known to have this issue.
• Not compatible with a DECKED Drawer System. Only the 70% extension with 1,000 lbs payload CargoGlide models are compatible with the Drawer System.
• Not compatible with the new Chevrolet/GMC CarbonPro bed.
• Not compatible with composite beds such as the 2022 Tundra or Tacomas. Note: It is compatible with composite bed trucks if installed with a DECKED Drawer System.
• Not compatible with any in-bed towing packages including 5th Wheel and Gooseneck packages.
• Not compatible with the DECKED Truck Tool Box. It is compatible with other shallow crossover tool boxes. See total height of CargoGlide to measure for compatibility in technical specs.
• Not compatible with any service body or RamBox beds at this time.
• Bed liners: Compatible with spray-in bed liners, but not drop-in plastic bed liners or BedRug mats. Remove before install.