Camburg King 2.5 Performance Kit w/ Adj Uni UCA Toyota Tacoma Pre/4wd 1996-2004

Our King 2.5 Performance kit for the Toyota Tacoma takes our leveling kit to the next level. We utilize Kings's 2.5 series front coilovers. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger ⌀ shocks. With the upper arms these shocks increase wheel travel.

After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our uniball upper arms address these issues and more. Replacing the stock ball-joint with a uni-ball bearing, we can increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road.

In the rear we go with a pair of King's 2.5 remote res. shocks. They have a substantial increased oil capacity due to their size and have a lot more control and damping. The compression adjuster allows you to tune the shock softer and firmer depending on what you're looking for and how you're the truck. Since they are longer in length they increase rear wheel travel and articulation. These are designed to be used with stock leaf springs or Deaver leaf springs for maximum useable wheel travel and performance.

What's included:

• King 2.5 IFP Coilovers (25001-151-EXT)
• Camburg Uniball Upper Arms (CAM-310005)
• King 2.5 Remote Rear Shocks w/ Compression Adj. (25001-153A)

• Improved ride both on and off-road
• Eliminates weak upper ball-joint
• Increased wheel travel
• Corrected suspension geometry
• Easy bolt-on installation
• Made in the USA

• Lift: 0-3 in (front)
• Track Width: Stock
• Wheel Size: 16-20 in
• Max Backspacing: 4.75 in
• Tire Size: 285/75/16 | 285/70/17

• Toyota Tacoma Pre/4wd 1996-2004

• Fits 6 lug 4wd and Prerunner 2wd models only