$209.95 Sale:$199.45
Model #20-0565-FL
Free Shipping
About Radium Engineering Catch Can
Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. These kits mount using factory holes and integrate perfectly with the surrounding components. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modifications are required.
OVERVIEW
Radium Engineering offers two different catch can kits for the R35:
The 20-0565 PCV line kit mounts near the brake master cylinder in the back of the engine bay and interfaces with the hose that goes from the PCV valve on the engine to the intake manifold (vacuum).
These two kits can be purchased separately or together.
When deciding which kit (or kits) to purchase, it is important to remember that both kits working together offer the most protection from oil ingestion into the engine. The PCV side kit is effective at keeping oil out of the intake manifold when the PCV valve is open, such as during light cruising, idle, etc. When in boost, the PCV valve closes and all the engine blow-by comes out of the head breathers. This is a good reason to have catch cans on the crankcase breathers.
20-0565 CATCH CAN KIT, PCV, NISSAN R35 GT-R
The PCV catch can kit runs inline between the PCV valve and the intake manifold. It mounts in the LH side engine compartment.
When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hoses will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. This catch can will intercept the oil and other blow-by liquids and prevent them from entering the intake manifold. The catch can must be emptied periodically.
Features:
WARNING: Cancer and Reproductive Harm
| Make Vehicle | Model | Submodel | Year | Engine | Notes |
|---|---|---|---|---|---|
|
2007-2022 Nissan GTR |
GTR | 2007-2022 |
Radium Engineering is a company that was founded in 2010. The company specializes in designing and producing some of the best aftermarket products in the market. They have produced parts used by various racers and motorsport enthusiasts worldwide. Today, they have established a name for themselves and have become a brand synonymous with performance.
All of their products are done in house, from research and development, design and manufacturing. They use the latest computer simulation and modeling tools that allow them to create an accurate and precise model. After all is done, they subject their products to an extensive testing procedure to ensure that it is safe to use and performs the way it is designed to.
The company focuses on manufacturing race-oriented parts and accessories such as surge tank lines and PCV oil catch can systems. They also offer fuel fittings, fuel manifolds, pumps, and fuel regulators designed for high performance applications. All their parts are made out of high quality materials that can withstand extreme forces.
If you are in search of a high quality fuel system component for your vehicle, then Radium Engineering is the brand for you. Specifically made for high-performance applications, they are the trusted brand of top racers from different racing disciplines everywhere. To know more about Radium Engineering, visit Vivid Racing and check out their list of products that fit your specific needs.
