Chase Bays High Pressure Power Steering Hose with E36 Steering Rack BMW E30 M52 | S54 | M54

The Chase Bays High Pressure Power Steering Hose is designed to eliminate the common OEM pressure hose leaks with improved aesthetics, higher durability, and stealthy design. Its also a great solution for engine swaps that need the high pressure hose changed. It is a full100% upgraded AN fitting replacement of the OEM hose, from rack to pump.
ALL Hose and Hose Ends are BMRS aka Brown and Miller Racing. This is the best Hose/Hose Ends in the world, the same components seen on NASCAR and Indy Car. All the Fitting Adapters are designed and manufactured by Chase Bays to be chassis specific for perfect leak free installs.

Hoses and Adapters
The high-pressure rack to pump hose is -6AN stainless steel, Teflon PTFE lined, and black Hytrel coated. This coating is crucial, it makes the hose resistant to chaffing if it routes against metal or a fellow hose. It is completed with high end black billet aluminum fittings with proper O-Ring or Crush seals and Metric to AN adapters for the rack and pump conversion to AN.

Every hose is individually pressure tested to 3,500 psi before it leaves our building, your high pressure power steering hose will not see above 2,000 psi.

We also make a complete 100% upgraded replacement of the OEM Power Steering Hoses and Reservoir.
This hose fits with LHD Left Hand Drive E30, E36, Z3, and E46 steering racks with a M52, S54 swap, or M54 swap.