Permatex Multi-Metal Epoxy 0.84 FL. OZ 6/Case

Permatex Steel Weld epoxy is a multi-metal epoxy adhesive that eliminates the need for welding or brazing and is resistant to water and solvents. This steel reinforced epoxy is ideal for sealing welded seams, filling metal cracks, and mounting metal components.

Ideal for complex, multi-piece assemblies. Bonds rigid materials including aluminum, brass, chrome, copper, iron, stainless steel, steel. Use to seal welded seams, fills metal cracks, and mount metal components.

Directions:

• Protect: Work area must be protected from accidental spills.
• Clean: Surfaces must be clean, dry and free of grease and oil.
• Prepare: Roughen smooth surfaces (using abrasives or sandpaper).
• Open Package: Remove Syringe. Turn syringe nozzle end up and pull plunger back slightly (1/8?). Allow air bubbles to rise to top. Snap off and save storage cap. Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger to stop flow. Snap cap back on.
• Mix Thoroughly: Thoroughly mix with paddle provided for two minutes until evenly colored.APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately (product sets in approximately 4 ? 6 minutes). Remove any excess epoxy immediately.
• Cure Time: Usable strength is reached in 4 hours at 72 DegreeF (22 DegreeC). Cooler temperatures may require longer set time.
• Clean-Up: Attach nozzle cap and store in molded tray. WARNING: Adhesive will not bond most polyethylene or polypropylene plastics