VTT Carbon Fiber Driveshaft Toyota A90/91 Supra 2020-2025

THE DRIVESHAFT for the MK5 Supra! VTT Is proud to offer our Carbon Fiber Driveshaft for the A90/91 Supra made exclusively for us by PST one of the leading names in CF driveshaft technology! This driveshaft is made from 3.25" CF tubing Spicer 1350 Yolks, and U-Joints. All pieces are then bonded using PST's proprietary process, and balanced to within 1/8 In/Ounce. We couple the driveshaft with VTT Custom 7075 aluminum adapters, 4340 Rear end Adapter all which convert the 3-bolt BMW bolt pattern to the 4-bolt Spicer yolk pattern and one heavy-duty CV Joint.

ALL OF THE quickest and fastest Supra run this shaft, dont get stuck with a lower-strength broken shaft at the strip. Do it once, do it right for LESS!

PST uses its extensive experience to produce world-class carbon fiber components. We maximize torsional strength by using two different wind angles during the manufacturing process. This technique creates a driveshaft with less stress on the driveline.

SFI Certification: These carbon fiber driveshafts can be SFI-certified. If your plans require SFI certification, be sure to request this when ordering.

Made in the U.S.A

Kit Includes:

• 1 VTT/PST CF Driveshaft
• 1 VTT 4340 Rear End Adapter
• 1 VTT Billet Adapter Tool
• 1 BMW Nut Repair kit
• 1 Rear 7057 Aluminum adapter
• 1 Front 7075 Aluminum adapter
• 3 M10 Rear flange bolts
• 3 M10 front flange bolts, and nuts
• 1 Small tube of Loc-tite medium thread locker
• Almost the same weight as the factory shaft while being many times stronger 15.2Lbs stock to 16 lbs VTT CF