See more parts for your Jeep Wrangler

TeraFlex 0-3" Lift Front Tera30 Axle w/ 4.10 R and P and ARB Jeep Wrangler JK 2007-2018

$4,789.99

TeraFlex

Model #3503410

Free Shipping


Shopper Award

TeraFlex JK Front Tera30 Replacement Axle Housings include a heavy-duty housing with axle tubes, bracketry, and forged inner knuckles, pre-installed inner seals and upper control arm bushings as well as ARB air locker, Spicer ring and pinion, Spicer bearings and install kits, TeraFlex HD ball joints, and factory yoke.

Simply swap over axle shafts, outer knuckles, outer axle assembly, unit bearings, brakes and sensors. The comprehensive assembly makes swapping axle housing a true DIY process!

TeraFlex heavy-duty JK Front Tera30 Replacement Axle Housings are perfect for replacing bent, broken, or damaged front axles in JK Wrangler and Rubicon vehicles. Can also be used as a direct bolt-on upgrade for JK Wrangler owners looking to beef up the front axle's weak areas.
Details:

  • SKU: 3503410
  • Lift Height: 0-3 Inch
  • Width: 67 Inches WMS-WMS (stock)
  • Axle Tube: 3.25 Inch x 0.25 Inch
  • Ring and Pinion: 4.10

Fits:

  • JK Wrangler (2-door) - front
  • JKU Wrangler Unlimited (4-door) - front

Includes:

  • ARB air locker
  • Spicer ring and pinion - 4.10
  • Spicer bearings and install kits
  • TeraFlex HD ball joints
  • Factory yoke
  • Sold As An Assembly

Features and Benifits:

  • 3.25 inch O.D. x 0.25 inch wall axle tube increases strength to resist bending and torsion w/ minimal weight increase
  • Pre-installed inner axle seals
  • Forged HD inner knuckles w/ greater upper and lower section strength
  • Ductile cast iron housing w/ increased rib gussets
  • HD ductile iron differential cover
  • Asymmetric housing design, for extra-long tube side strength
  • Smooth radius bottom design to glide over rocks and obstacles
  • Integrated lower flexarm skid plates
  • Bottom oil drain hole for simple fluid changes
  • Premium UV protected triple-stage powdercoat process for superior corrosion resistance
  • 1/4 inch thick CNC laser cut axle brackets for extreme strength
  • Integrated factory location upper control arm mount
  • Pre-installed upper control arm bushings
  • Reinforced front track bar mount (ties into spring pad) for greater strength
  • Proper pinion angle for Lifted JK applications
  • Pre-tapped hole on spring perch for bump stop extensions
  • Pre-drilled holes for limit straps and lower spring retainers
  • Retains all JK ESP, ABS, and speedometer sensor capability
  • 100 percent engineered, designed, and built in the USA
  • 100 percent new components
  • 1-Year / Unlimited Mileage Warranty

Notes:

  • Install Time: 6 Hours
  • This is a very heavy item and must be shipped by freight truck
  • Below is a list of Requirements and Recommendations for TeraFlex axle housings as budget and build preference allows.

Requirements and Recommendations
Control Arm Upgrade:

  • 0-3 Inch Lift: This axle is a direct bolt-on upgrade! Although stock control arms will work at this Lift height, aftermarket flexarms may be used if desired - highly recommended with a 3 inch Lift.
  • Front upper (P/N 1252200) and front lower (P/N 1252000) TeraFlex JK Sport Flexarms will work w/ 2.5-3 inch Lifts.
  • Front upper (P/N 1415520) and front lower (P/N 1415500) TeraFlex JK adjustable Alpine Flexarms will work w/ 2.5-4 inch Lifts.
  • Front upper (P/N 1315520) and front lower (P/N 1315500) TeraFlex JK adjustable Alpine Long Flexarms will work w/ 3-6 inch Lifts.

Axle Shaft Upgrade:

  • 0-6 inch Lift: High-quality aftermarket axle shafts will enhance your set up. We recommend RCV or TEN Factory high-end shafts. Stock Rubicon axle shafts may also be reused.

Axle Shaft Tube Seal Upgrade:

  • 0-6 Inch Lift: Get serious with HD 0.5 inch wall seals (P/N 4354050) or keep it real with standard 0.25 inch wall seals (P/N 4354025). Stock seals may also be reused.

Steering System Upgrade:

  • 0-3 Inch Lift: The JK HD Tie Rod and Drag Link Steering Kit (P/N 1853900) will do the trick, though the stock steering system may be reused.

Brake Upgrade:

  • 0-6 Inch Lift: Experience a notable difference w/ a TeraFlex Big Brake Kit (P/N 4303400 or P/N 4303420) or JK Big Rotor Kit (P/N 4303480 or P/N 4303490)

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2007-2018
Jeep Wrangler

Who is Teraflex?

Teraflex is an aftermarket company that specializes in manufacturing various parts and components for the Jeep Wrangler. With their history going back to the 1950s distributing parts for the military jeeps, they have become the leading experts when it comes to the jeep platform and is the go to brand of many Jeep owners today.

Jeep Experts

The company offers products that directly fit most Jeep models. They offer suspension parts, body armors, differential covers and more. All of their products are made in-house, ensuring that they would be able to maintain their high-level of standard. They have applied their years of experience to create top-notch products that satisfy their customer’s demands.

Revolutionizing the Jeep Industry

Being the leader in the market, they are also the pioneers of aftermarket parts when it comes to this platform.  They were the first company to introduce aftermarket parts to the then brand new released TJ Wrangler. They offered an upgrade to the newly designed coil over suspension of the TJ series and has also provided a solution to the platform’s transfer case low gearing. They have helped the TJ platform become a key player in the offroad world, which help the company cement its position as the no.1 source of Jeep accessories.

Purchase Teraflex Products at Vivid Racing

If you own a Jeep and want to turn it into a better offroad performing machine, then Teraflex is the right brand for you. With decades of experience in the industry, you can be sure that you will only be getting the best value of the product for your money. Visit Vivid Racing and check out their list of products that would fit your specific needs. 

TeraFlex Inc. warrants TeraFlex products to the original retail purchaser to be free of defects in material and workmanship for as long as the original purchaser owns the vehicle on which products were originally installed unless otherwise specified. This warranty does not cover or include product finish, improperly installed or applied products, improperly maintained products, products used for racing or competition or damage due to abuse or neglect.

Failure to complete regular maintenance on TeraFlex flexarms (grease every 3000 miles) will void this warranty.

All TeraLow products are warrantied to be free of defects in material and workmanship for two years from date purchased.

TeraFlex axles are covered by the TeraFlex Inc. 12-month warranty to be free of defects in materials and workmanship from date purchased.

All Falcon Shocks are warrantied to a period of three years from the original date of purchase. Upon verification, TeraFlex Inc. will repair or replace the shock absorber at no cost.

To file a warranty claim please call our customer service department at 801-713- 3314, Monday - Friday, 8 am - 5 pm MST. Closed Saturday, Sunday and all major holidays.

Check out these other great products