Torque Solution Turbo Inlet Hose (Non-Recirculated) Subaru EJ w/ 3.3" Inlet FP Turbo 2020-2021

Torque Solution Turbo Inlet Hose for the Subaru EJ Engines w/ 84mm / 3.3" Inlet FP Turbo. Our silicone inlet hose is heavily wire reinforced and is made from 4 ply high grade silicone to prevent collapsing under high boost. Our inlet is also made without the BOV recirculation port, so it must be used in speed density only configurations. This is perfect for a clutter free engine bay when not utilizing an OEM style BOV. We also include a high quality black anodized billet aluminum joiner to connect to your 3" intake.

Features:

84mm / 3.3" Specifically made to fit FP Turbos
4 Ply Silicone w/ Heavy Wire Reinforcement
Includes Silicone Friendly Stainless Steel Hose Clamps
Non Recirculated for Vent to Atmosphere (Speed Density) Set Ups
Limited Lifetime Warranty

Kit Includes:

(1) 84mm Non-Recirculated Black Silicone Turbo Inlet Hose
(1) 3" Billet Aluminum Coupler (for 3" Intakes)
(1) 78-101mm Worm Gear Clamp
(1) 70-90mm Worm Gear Clamp
(3) 3/8" 90° Nylon Elbows
(2) ½" to 3/8" 90° Nylon Reducer Elbows
(2) ½" to 3/8" Straight Nylon Reducer
(2) 5/16" to 3/8" Straight Nylon Reducer
(1) ½" Nylon T Fitting
½" Fuel/PCV Hose (13")
(6) Heavy Duty Zip Ties

Fitment:

Subaru Forester XT 2004-2013
Subaru Legacy GT 2005-2009
Subaru STI 2004-2021
Subaru WRX 2020-2021

Note(s):

The Torque Solution inlet bypasses the PCV Diagnosis Port. You will need to perform a simple bypass:
1. Locate PCV Diagnosis connector (grey or white depending on year), which located on the block next to throttle body.
2. You will need to use a pair of needle nose pliers to remove the jumper pin inside the PCV Diagnosis connector. This pin should pull out easily only using slight pressure. Do not discard the jumper pin removed from the connector.
3. Place the jumper pin into the female harness plug that was connected to PCV diagnosis connector. Use electrical tape to secure in place.
4. The open port will either be fed into the inlet by using the supplied T fitting and hose by keeping the PCV in place connecting to 1 of the front inlet ports or by connecting to your AOS/Catch can setup by removing the PCV.

Proposition 65

$/!\ warning$ WARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Make Vehicle	Model	Year
2004-2013 Subaru Forester XT	Forester XT	2004-2013
2005-2009 Subaru Legacy	Legacy	2005-2009
2004-2020 Subaru STI	STI	2004-2020
2002-2021 Subaru WRX	WRX	2002-2021

Who is Torque Solutions?

Torque Solutions is an aftermarket company that produces a variety of parts and accessories for different vehicle platforms. They offer parts for practically every makes and models may it be European, Asian, or American-made vehicles. They have a full line of parts like engine mounts, shifter mounts, bushings, suspension components, exhaust mounts and more.

There are people who use their vehicles to go from point A to point B, but there are some who prefer to do it faster and with more style. Torque Solution products are an upgrade as it is lighter and more durable compared to stock. This is why they have been used by enthusiasts who prefer a much high-spirited driving experience.

Products that are High in Standards

Torque Solutions are best known for creating high-quality billet products. Using 6061 Billet aluminum and a CNC machine for precision cutting, they are able to produce products that are high in standard consistently.

Their products do not only perform above expectation, but it also provides an added aesthetic value to the vehicle. This clearly proves that you can have both form and function at the same time.

Purchase Torque Solutions Products at Vivid Racing

If you are in search of top quality parts that look good as well as it works, then Torque Solution products are the right brand for you. They have been trusted by a lot of enthusiasts and have always provided products that meet their expectation. Visit Vivid Racing and check out their list of products that would fit your specific needs.