See all Exhaust Parts products

Remflex Exhaust Gasket Basic T-3 Turbo Inlet 4-Bolt


Remflex Exhaust Gaskets

Model #REM18-024

Help me decide

Shopper Award

Finally! An exhaust gasket that really works! 100% graphite construction means Remflex gaskets can take the heat-up to 3,000° F! A built-in 50% crush allows Remflex gaskets to fill gaps in headers or exhaust manifolds up to 1/16-inch inch. No more leaks ever! Remflex gaskets are designed to rebound against the sealing surfaces, so they never require re-tightening! 100% satisfaction guaranteed! If, for any reason you aren't satisfied with Remflex exhaust gaskets, return them within six months of purchase, along with proof of purchase and receipt, and we'll either replace them or give you your money back! That's the Remflex Performance Promise.

Installation Tips: We want you to get the most from your new Remflex exhaust gaskets. To assure your complete satisfaction, please follow these basic installation guidelines:

  • DO NOT BEND! Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.
  • Do not over tighten. When properly installed the flange should be tightened evenly - See the suggested torque range.
  • Longer bolts aren't necessary. Though Remflex are thicker than other gaskets, standard length bolts will work fine.
  • Do not use sealers. Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cause leaks.
Suggested Torque:
  • Remflex gaskets are like no other. They are soft and easily compressible; therefore they require less torque than factory recommendations.
  • The suggested torque range for this part is 12 to 16 Ft Lbs.
  • Turbo - Basic T-3 Inlet Gasket, Open Plenum 1.750"w x 2.250"h Port, 4 Bolt Holes with Bolt Spacing: (A) 1.75" x (B) 3.375", 1(ea)

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm