The new ShrockWorks Mid-Width Front Bumper for the Jeep JK is a slightly larger version of the "Stubby". If you are looking for something a bit wider and would like to retain the factory fog lights, this bumper is for you!The new mid-width is still compact enough to stay out of the way off-road and allow great approach angles while providing a little extra width and mounting locations for the factory fog lights. Despite the larger size, this new bumper blends in nicely with the smooth lines of the new JK Wrangler. It looks TOUGH without looking like an aftermarket afterthought.
The main body of the bumper is constructed of high strength 3/16" plate steel, laser cut, CNC formed and meticulously welded and finished by skilled craftsman in the USA!
A removable 3/16" steel SKID PLATE that wraps underneath is included! This skid plate wraps far enough under that it will also protect the sway bar disconnect motor found on all JK Rubicons and some other 2007 + Jeep JK s. Since the skid plate is removable, it can be easily replaced if damaged, although its not likely to happen. The skid is formed specifically for strength. The edges are bent up on the sides. It has welded gussets on the back side, and its made from the same high-tensile 3/16" steel plate as the bumper itself. This is probably the most damage-prone area on a Jeep. Many bumpers have a flimsy flat piece of flat plate in this area. One good hit there, and the whole bumper is bent & toast. Others charge you extra for a skid plate. We consider it a necessity and include it as a standard feature.Massive 1" thick plate steel Shackle / Recovery points are included as a standard feature. These tabs are welded front & back, and they are designed in such a way that even if the welds were to fail, the recovery points themselves are still held in the bumper. Winch mount plate included. There is nothing else needed to mount a winch. Just bolt it on and go! Accommodates most winches up to 9500 lbs, including hard to fit winches like the new Warn Powerplant HP winch.
Lighting options. Built-in light tabs on top of the bumper for aftermarket driving or fog lights. Recessed light mounts in the front face of the bumper accept the factory fog light or PIAA 510 4" lights, either the driving or fog version. If you already have the stock lights, select none in the options. If you dont have the stock fog lights, we recommend buying the PIAA lights. They are much higher quality than the stock fog lights and cheaper too. Available with your choice of no top tubing or a low profile winch height hoop. Finish options are: bare steel, semi-gloss black powder coat, and a semi-matt finish textured black powder coat.
Winch compatibility: All of the winches listed on our will fit. MOST winches b/t 8000 & 9500 will fit. Known exceptions: Warn 8275, Warn Zeon, Superwinch EP & EPi, any worm gear style winch (these are typically industrial winches such as the ramsey RE 12000 and look very different from normal winches). The Tmax short-drum comp winch and the Warn 9.0RC will require re-drilling some holes. The Ramsey short-drum comp winch will bolt up w/o any mods.
WARNING: Cancer and Reproductive Harm
ShrockWorks is a Houston, Texas-based company that has been fabricating off-road parts for approximately 15 years. It manufactures front and rear bumpers, rock sliders, skid plates, and several other miscellaneous products for Toyota, Jeep, Nissan, Ford, Chevrolet, and Suzuki models.
While it may be a small company, ShrockWorks is rapidly growing and expanding its product lineup and customer base. When you buy a ShrockWorks product, you can rest assured that your business is genuinely appreciated and you will receive exceptional customer service. ShrockWorks is dedicated to providing prompt and accurate responses to consumer inquiries before, during, and even after your purchase. With an industry that is saturated with several different companies, having strong customer relationships can really set one apart from the competition.
The team over at ShrockWorks is truly passionate about dueling with Mother Nature and taking their vehicles off-roading. While Mother Nature is a lot of fun, she can be a very intimidating and unpredictable adversary. Off-road trails and harsh landscapes can chew up 4x4 vehicles and their flimsy accessories.
ShrockWorks’ mission is to increase drivers’ confidence and help them get through trails with their trucks in one piece. The team takes pride in every product it builds and ships. Hundreds of hours go into research & development and the design of each ShrockWorks product to ensure it offers perfect fitment, unrivaled durability, and simple installation.
To guarantee you and your ride survive the off-road, ShrockWorks uses only the best and strongest materials for all of its products. The brand combines old-world workmanship with the latest technology (computer-aided design) and manufacturing techniques to build each product. Most parts are precisely cut by computer-controlled lasers or high-definition plasma systems. They are then welded and hand-finished to produce a product that is second to none. Its entire lineup is designed to have a very high strength-to-weight ratio and withstand the vigorous elements of the off-road.
If you like to play hard in your 4x4 vehicle, you need to invest in ShrockWorks’ parts. The low-hanging plastic factory bumper can be easily ripped off by rocks and other hazards when off-roading. A ShrockWorks bumper will give you the confidence you need to charge ahead and take that next adventure.
Vivid Racing carries a wide assortment of off-road parts from ShrockWorks, including front and rear bumpers, rocker panels, running boards, winches, skid plates, and much more! If you have any questions about any of the products listed above, please call our expert sales team at (480) 966-3040.
MBRP Exhaust 2 1/2in. Off-Road Tail Pipe; Muffler before Axle; AL Jeep Wrangler 2007-2011 3.8L V6
MagnaFlow Exhaust Products MF Series Black Axle-Back System Jeep Wrangler 2007-2017